Innokin iTaste SVD 2.0 User manual

USER MANUAL
iTaste SVD 2.0 中性英文说明书 四色印刷 尺寸：70*127mm 材质：80g黄牛皮纸 双骑马钉装订 日期2014.9.17

Welcome to the iTaset SVD 2.0
The first of the new generaon of Innokin iTaste advanced
personal vaporizers that harnesses the power of the
customized American made 20Wa customized Evolv
Evoluon Chipset.
Congratulaons on your purchase the original Innokin iTaste
SVD2.0 and thank you for being a member of the Innokin
community.
First of all, please ensure that your iTaste SVD2.0 is a Real
Innokin Technology product.
To immediately verify that this iTaste SVD2.0 is a real Innokin
Technology device please:
1) Locate and Scratch to reveal your iTaste SVD2.0 Unique
Authorizaon number which is included on a label on the
reverse of the packaging.
2) Visit the Official Innokin Technology website at hp: //
www.Innokin.com.
3) Enter the Unique Authencaon number in the
Authencaon field.
4) Verify your iTaste SVD2.0 is a Real Innokin Technology.
If you have any quesons or suggesons we would like to
invite you to please write to us at [email protected]. We
are looking forward to hearing from you.
For the latest informaon and to win great prizes please join
our Innokin FaceBook Page :
www.facebook.com/Innokin.Technology

WARNING:
Please read this secon carefully to ensure you receive
maximum benefits from your iTaste SVD2.0 and enjoy
vaping with it in the most safe and effecve ways possible.
1. This Advanced Personal Vaporizer may be used with
e-liquids that contain nicone. Please check with your
e-liquid provider. This product is only intended for use by
adults of legal smoking age (18+) and should not be used
by children, women who are pregnant or breaseeding, or
persons with or at risk of heart disease, high blood
pressure, diabetes or taking medicine for depression or
asthma, or who otherwise may be sensive to nicone.
Nicone is addicve and habit forming, and it is very toxic
by inhalaon, in contact with the skin or eyes, or if
swallowed. Ingeson of the non-vaporized concentrated
e-liquid ingredients can be poisonous. Keep away from
children and pets.
2. This Advanced Personal Vaporizer may be used with
e-liquids that contain nicone, a chemical known to the
State of California to cause birth defects or other
reproducve harm. Please check with your e-liquid
provider. (For products sold in California.)
3. This Advanced Personal Vaporizer is only designed to be
used with high quality e-liquid. Please check with your
e-liquid provider. This device is not intended for use with
loose tobacco leaf or herbal substances.
4. This Advanced Personal Vaporizer has not been evaluated
by the Food and Drug Administraon and is not intended
to treat, migate, prevent or cure any disease or condion.
This product is not intended for use as a smoking cessaon
device.
5. Innokin Technology is not responsible for baery and
charger explosions, or malfuncons, due to the use of
low-quality baeries and charger. The iTaste SVD2.0 does
not come included with baeries or charger.
We recommend using high quality IMR high-drain 18650,
18350 baeries
The iTaste SVD2.0 cannot use 2 stacked baeries.
Using any other types of baeries may damage your iTaste
SVD2.0.
For the protecon of the Evolv Experience chipset this
device features Reverse Polarity protecon. Nonetheless,
please ensure that you insert the baery in the correct
direcon by lining up the posive (+) and negave (-) ends
of the baery correctly.
EN-1 EN-2
6. Innokin Technology is not responsible for atomizer
explosions, or malfuncons, due to the use of low-quality
atomizer. The iTaste SVD2.0 does not come included with
atomizer.
7. This Advanced Personal Vaporizer includes small parts such
as the top adapter caps. Always keep any small parts out of
reach of children and pets to prevent swallowing or other
harm.
8. Obey local laws or regulaons regarding Electronic
Cigarees when vaping. If you are in an area where there
are any bans or potenal dangers, please do not use your
Advanced Personal Vaporizer.
9. Do not misuse, mishandle or store your Advanced Personal
Vaporizer improperly. Even though it is made of high
quality stainless steel it may become damaged when
dropped or otherwise mishandled.
10. Do not drop, throw, or mishandle your Advanced Personal
Vaporizer as the outer shell or inner components may
become damaged. If the shell of the device becomes
damaged or the structural integrity of the baery
becomes compromised, disconnue use immediately and
contact your Authorized Innokin Technology Vendor.
11. In order to prolong the operaon of your Advanced
Personal Vaporizer, please do not place or store in
excessively hot or cold environments.
12. Your Advanced Personal Vaporizer is not waterproof.
Keep it dry at all mes. Do not submerge this device or
expose it to moisture.
13. Keep your Advanced Personal Vaporizer away from
sources of excessive heat or cold as damage may occur.
14. Do not aempt to repair the unit by yourself as damage
or personal injury may occur.
15. If the device becomes excessively hot, disconnue use
immediately and contact your Authorized Innokin
Technology Vendor.
16. If the device will not power off, disconnue use immedi-
ately and contact your Authorized Innokin Technology
Vendor.
17. If the device funcons in a way which is not stated in the
manual contact your Authorized Innokin Technology
Vendor.

Sleep Mode
If the SVD2.0 is not acvated for 30 seconds the screen will
power off and it will enter sleep mode. Press the power
buon to acvate the unit.
Variable Waage
Waage can be adjusted from 5.0 – 20.0W in .1 was
increments by pressing “ + ” and “ - ” buon.
Lock the selected Waage (Hold both the “ + ”and “ - ”
buons for five seconds)
Aer seng your waage you can lock the seng to prevent
accidental changes to your waage. Press and hold both the
“ + ” and “ - ” buons for five seconds to lock your sengs.
The screen will show “ POWER LOCKED HOLD UP DOWN ”
and current seng parameter of waage ,Press and hold the
“ + ” and “ - ” buon for five seconds a second me to unlock.
Please note that all other funcons (such as ohm check and
baery check) are sll funconal while you have the waage
sengs locked.
Error NOficaons
The iTaste SVD2.0 has the following error noficaons: Check
Atomizer, Short Circuit, Check The Baery, Overheat
Protecon, Baery Low Voltage, Reset .
Check Atomizer
When the atomizer is not connecng properly the screen will
display : “ CHECK ATOMIZER ”
Short Circuit
The screen will display “ SHORTED ” if there is a short circuit.
Check Baery:
When the baery voltage lower than 3.1 V the screen will
display “ CHECK BATTERY ” when the firing buon is pressed.
Please recharge or replace the baery. If the quality of the
baery is not sufficient for the iTaste SVD2.0 the screen will
display “ WEAK BATTERY ”.
Overheat Protecon:
The screen will display “ TOO HOT ” if the PCB overheats
from overvaping.
“ ” buon: ON/OFF baery switch
To power on or power off the iTaste SVD2.0 quickly push the
“ ” power buon three mes.
When the iTaste SVD2.0 has been powered on hold the
buon down to acvate the unit and commence vaping. This
safety feature prevents the atomizer from powering on
unintenonally.
ON Mode
Quickly press the “ ” buon three mes to power on your
iTaste SVD2.0; the screen will display the current Was
seng and the resistance (Ohm) of the aached atomizer.
OFF Mode
Quickly press the “ ” buon three mes to power off your
iTaste SVD2.0, the screen will display “ LOCKED CLICK 3X ”.
OPERATION GUIDE
EN-3 EN-4
1. Connector
2. Firing , ON/OFF buon
3. Waage increase buon
4. Waage decrease buon
Please note: Pressing Buons 3 (+) + 4 (-) together for
5 seconds will acvate or deacvate the Waage Lock
funcon.
5. Thread adaptor Cap
6. 18350 baery tube
7. 18650 baery tube
8. Baery cap
1
3
2
4
5
7
8
6

To check the unique Serial number of the iTaste SVD2.0:
1) Set the resistance to 5W.
2) Click the power down (-) buon 10 mes to display the
Serial number.
Reverse Polarity Protecon:
The Evolv Experience chipset is protected from damage
caused by reverse polarity. If the baery is inserted properly
the device will not fire and the chip will not become
damaged. Please ensure that you insert the baery in the
correct direcon by lining up the posive (+) and negave (-)
ends of the baery correctly.
Reset:
When the baery low quality and voltage very low the
iTaste SVD2.0 will reset.
Technical Specificaons:
Input Voltage: 3.2~4.3V
Output Voltage: 2.0~6.3V
Maximum Output Current: 6.0A
Maximum Output Waage: 5.0-20W
Resistance of clearomizer: 0.5-3.0 ohm (0.5 Ohm minimum)
Baery: IMR high drain 18350/18650 (without protecon,
maximum current > 5000mA.)
The iTaste SVD2.0 cannot use 2 stacked baeries and any
other types of baeries may damage your iTaste SVD2.0.
25-Seconds Cutoff:
If the buon is held down for 25 seconds or longer, the iTaste SVD2.0
will automacally power off unl the buon is released and pressed
again.
Short Circuit/Atomizer Protecon (0.5 Ohm):
Short Circuit/Atomizer Protecon protects the iTaste SVD2.0
Advanced Personal Vaporizer against shorted atomizers and
will stop the unit from funconing in unsafe condions.
iTaste SVD2.0 Travel Case and Baery Power level checker.
The iTaste SVD2.0 is packaged with a high quality travel case.
The case can be used to carry your iTaste SVD2.0, 18650 and
18350 baeries, atomizer/clearomizer and build materials.
The case also has a built in baery level power tester. To use
the baery power level tester simply aach each the wired
sensors to the posive (+) and (-) side of the baeries.
We recommend that eliquid not be stored in the case with
your device and baeries to prevent damage.
Baery Installaon
Short 18350 tube
Long 18650 tube
EN-5
To use an 18650 baery please aach the long 18650 tube.
To use an 18350 baery please aach the short 18350 tube.

The iTaste SVD2.0 includes a baery level power tester
inside the Innokin iTaste SVD2.0 travel case.
To use the baery level power tester with compable 18350,
18490, 18500 and 18650 baeries please:
1) Carefully aach the le and right power lines to the
negave (-) and posive (+) contacts of the baery.
2) The LED bar will light up according to the level of power
remaining in the baery:
1 LED - Baery should be charged.
2 LED - 25% Power
3 LED - 50% Power
4 LED - 75% Power
5 LED - 100% Power. Baery is fully charged.
Warning:
1) When not using the Innokin baery level power tester
please store the wires and contacts carefully in the travel
case pocket.
2) Do not spill liquids on the baery power level tester; it
should remain dry at all mes.
3) Do not store the Innokin iTaste SVD2.0 travel case in
excessively hot or cold environments.
4) Do not connue to use the baery level power tester if it
becomes damaged.
WARRANTY INFORMATION
Innokin Technology provides a three month aer sales
service warranty to all of our authorized vendors. Please
consult your Authorized Innokin Technology Vendor for more
informaon and terms of service.
Innokin’s warranty does not apply to products purchased
through third-party vendors. To ensure you are purchasing
authenc Innokin Technology products, and to take
advantage of our aer sales service warranty, only purchase
from Authorized Innokin Technology Vendors.
EN-5