Puffco PEAK User manual
PEAK INSTRUCTION MANUAL
SHARE THE VIEW:
Use #PuffcoPeak to share your experience.
We’ll share your photos and videos with our
global audience (seriously we will).
Puffco
Whats inside / p 3
Quick start /p 4 - 8
Temperature settings / p 9
Battery / p 9
Cleaning your device / p 10
Tips and Tricks / p 11
Warnings / p 11
Peak Protection / p 12
Legal / p 13
YOU’RE ALMOST TO THE TOP!
We know it’s a drag, but please read through all
the instructions. This device is the first of its kind,
and we’d like you to learn the easy way by reading
this booklet. Also, you’ll learn some secret tips and
tricks along the way.
= Tips to get the most out of your Peak
G
H
I
A: Tether
B: The Peak Dab Tool
C: Cotton swabs (4)
D: USB cable
E: AC adapter
F
J
D
E
WHAT’S INSIDE:
F: Glass attachment*
G: Carb Cap*
H: Ceramic Bowl
I: Atomizer**
J: Base
03
*Each glass piece is hand blown, and may vary slightly in size.
**Part (I) requires periodic replacement.
A B C
STEP 1: Fully charge device before first use.
Device pulses white while charging, and turns
off automatically when complete.
STEP 2: Fill glass with water just above the
air-holes. Do not fill glass while attached to base.
QUICK START:
1
2
04
*Each glass piece is hand blown, and may vary slightly in size.
X
= Do not overfill glass.
= Water will damage base and atomizer!
STEP 3: Align inlet hole on the front of the
glass with atomizer. Carefully push the front
of glass into the base, then the back.
STEP 4: To power the device on/off, hold down
the button for 3 seconds. = Power down
when finished to conserve battery life.
3
4
05
STEP 5: Single click to toggle through heat settings.
BLUE (Low) - GREEN (Medium)
RED (High) - WHITE (Peak)
STEP 6: Use The Peak Dab Tool to place con-
tents on the bottom surface of the bowl (not
the side). = Do not overfill. Overfilling can
damage your atomizer.
5
6
06
STEP 7: Place carb cap on top of atomizer.
= Protect your carb cap by using the tether
provided.
STEP 8: Double click to initiate heat-up. Press and
hold button anytime to exit. Pulsing light indicates
heat-up mode is active.
7
8
07
*See p. 11 for sesh mode.
STEP 10: Use a cotton swab to clean
the bowl after each use.
9
10
08
STEP 9: Device will vibrate and lights will flash 3
times when ready. = Inhaling gently will produce
the best results.
TEMPERATURE SETTINGS:
BATTERY:
To cycle through the 4 temperature settings,
click the button once, and repeat to cycle through
the settings.
Average heat-up time is around 20 seconds.
The Peak device features intelligent temperature
calibration, which provides a more consistent
experience during repeated use. This means
that all heat up times may vary.
= Do not overfill bowl
Click the button 3 times to check battery life.
Color will indicate remaining battery life.
Battery fully charges in approximately 2.5 hours.
= Power down your device after you’re finished
to preserve battery life.
LOW MED HIGH PEAK
100% - 60%
SMLXL
60% - 20% 20% - 0%
09
Load Size
TEMPERATURE SETTINGS:
1. Clean carb cap and glass by soaking in
isopropyl alcohol. Rinse clean with water after.
2. Clean gold threads and connector in the base
with a cotton swab.
3. To clean the atomizer, unscrew from base, and drop
the fully assembled atomizer into iso for 30 minutes.
*Be careful removing the atomizer after it was just used,
it will be hot to the touch. Allow time to cool.
WARNING:After cleaning, allow all parts to
thoroughly dry before use. (iso is flammable)
*Do not get the base wet - it’s electric - it will break.
*Do NOT attempt to disassemble the atomizer before
submerging fully assembled into iso.
CLEANING:
10
Preparation: Remove glass before unscrewing and
re-inserting atomizer (do not overtighten, don’t force it).
TIPS AND TRICKS:
WARNINGS:
- Do not forcefully remove the bowl, submerge whole
atomizer in iso while fully assembled.
- Do not handle atomizer and bowl after use. Allow
time to cool.
- Atomizer buzzing is normal, don’t worry.
- Do not allow water in the bottom chamber of glass.
- Do not let water seep into the atomizer.
- Do not store device with water in the glass.
- Attach / detach glass carefully, do not force.
- Several short inhales produce more vapor.
- Do not overfill the bowl.
- Do not charge or operate below 32° F or above 100° F.
- Keep away from moisture and high humidity.
- Store in a cool dark place when not in use.
Sesh Mode:
Haven’t reached your peak? We’ve got you covered.
We created a sesh mode that increases heat and
extends your session by 15 seconds. Use it to boost
heat, or to share with your friends.
If vapor production is low, double click to initiate
sesh mode. Still not enough? Damn you’re
hardcore, so sesh again! You can double click as
many times as you want to keep the session going.
Multicolored light flash: Indicates poor or no
connection between the base and atomizer.
3 red flashes: Indicates low battery.
5 light flashes: Indicates short circuit.
Red light holds: Device overheated.
- PUFFCO QUALITY GUARANTEE -
11
12
Puffco One-Year Limited Warranty Summary:
Puffco provides one year of coverage for only the
electronic base. This covers defects in materials
and workmanship for one year from the date of
original retail purchase. Puffco does not warrant
glass, atomizers, normal wear and tear, or damage
caused by accident or abuse. To obtain service,
or visit https://Support.Puffco.com/hc/en-us.
Call charges and international shipping charges
may apply, depending on the location. Subject to
the full terms and detailed information listed on
Puffco’s website under local consumer laws.
You may be required to furnish proof of purchase
details, and/or the device itself when making a
claim under this warranty. Do not attempt to open
the Puffco Peak base, this will immediately void the
warranty for your product.
PEAK PROTECTION:
Peak Protection keeps your device performing at
its best, ensuring an optimal experience each time.
Should you encounter an issue, first, visit Puffco.com
to view FAQ’s (most answers can be found there).
If not, you can livechat with a specialist at Puffco.
com or contact our customer care team by emailing
- PUFFCO QUALITY GUARANTEE -
LEGAL:
For all Puffco products, strictly use as intended. Puffco
units should be used only by persons of legal age in
congruence with state and or federal law.
Know that Puffco reserves the right to verify the age of
the consumer prior to every purchase.
Registered Puffco products are not intended for any
use which is illegal under any state or federal law.
Moreover, Puffco products aren’t intended to diagnose,
prevent, treat, or cure any disease or medical
condition. If you are pregnant, nursing, taking
medication for a medical condition, or suspect you
have a medical condition, please consult your
physician before using any Puffco product.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Thank you for choosing Puffco. Welcome to the family!
Puffco products are designed and engineered in
Brooklyn, NY and assembled in China.
13
SHARE THE VIEW:
Use #PuffcoPeak to share your experience.
Kindly follow us on instagram!
Puffco
by Puffco Creation Labs - Subject to alterations · All rights reserved
770-00003
Other manuals for PEAK
1
Table of contents
Other Puffco Vaporizer manuals
