Insignia NS- DPF0812W User manual

8" Digital Picture Frame
NS- DPF0812W
User Guide

2www.insigniaproducts.com
8" Digital Picture Frame
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up your picture frame. . . . . . . . . . . . . . . . . . . . 10
Using your picture frame . . . . . . . . . . . . . . . . . . . . . . . . 12
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6-month limited warranty. . . . . . . . . . . . . . . . . . . . . . . 32
Introduction
Congratulations on your purchase of a high-quality Insignia
product. Your new digital picture frame is designed for
reliable and trouble-free performance.

8" Digital Picture Frame
3
www.insigniaproducts.com
Safety information
Always follow these basic safety precautions when using
your digital picture frame. This will reduce the risk of fire,
electric shock, and injury.
Placement—To prevent fire or electric shock, do not
expose this digital picture frame to rain or moisture. To
prevent it from falling do not place it on an unstable cart,
stand, tripod, bracket, or table. Keep the unit away from
strong magnets, heat sources, direct sunlight, and excessive
dust.
Installation—Make sure that the digital picture frame is
used in accordance with the instructions and illustrations
provided in this manual.
Objects and liquids—Do not push objects of any kind
into the digital picture frame through openings. Do not spill
or spray liquid of any kind on or in the digital picture frame
(this may result in a fire or electric shock). Do not place
anything heavy on the unit. To ensure proper ventilation and
proper operation, never cover or block the slots and
openings with a cloth or other material.
Disassembly—Do not attempt to disassemble the frame.
There is a risk of electric shock. Contact qualified service
personnel if your digital picture frame is in need of repair.
Cleaning the digital picture frame—When cleaning,
make sure the frame is unplugged from the power source.
Use the supplied cleaning cloth, or a cloth slightly
dampened with water, for cleaning the exterior of the frame
only.
Warnings
To reduce the risk of fire or shock hazard, do not expose
the frame to rain or moisture and unplug the frame during
lightning storms.
To prevent the risk of electric shock, do not remove the
cover. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel.
There is a risk of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type of
battery.

4
NS- DPF0812W
www.insigniaproducts.com
Features
• Displays digital pictures (JPEG format) and picture
slideshows without a computer
• Displays pictures directly from a portable memory
device (not included)
• Bright, clear TFT LCD screen
• Compatible with a wide variety of memory cards,
including:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
•MemoryStick®
• Memory Stick Pro Duo™ (requires an adapter -
not included)
•xD™
• microSD™ (requires an adapter - not included)
• Compatible with USB flash drives
• Mini-USB port to connect the digital picture frame
to your PC
• Multi-image mode displays multiple pictures at the
same time in a slideshow
• Auto Rotate–pictures are rotated based on your
photos’ embedded EXIF data
• On-frame button controls and infrared remote
control
• 2 GB internal memory
Note
EXIF (Exchangeable Image File) data
is information stored by a digital
photo camera as it records a photo.
This information includes what
orientation the camera is in when a
photo is captured.

8" Digital Picture Frame
5
www.insigniaproducts.com
Package contents
• Digital picture frame
• AC power adapter
•USBcable
•UserGuide
•QuickSetupGuide
• Remote control with battery (CR2025)
•Cleaningcloth
Back
#Description
1Adjustablestand
2PowerOn/Offswitch
Made in China
THIS CLASS (B) DIGITALAPPARATUSCOMPLIES
WITH CANADIAN ICES-003.
CETAPPAREIL NUMÉRIQUE DE LA CLASSE (B) EST
CONFORME À LANORME NMB-003 DU CANADA.
Model: NS-DPF0812W
Power: 5VDC, 1.0A(5W)
Testedto Comply with FCC Standards
FOR HOME OR OFFICE USE
Manufactured for Insignia Products
7601 PennAvenue South
Richfield MN USA55423
Portrait
Landscape

6
NS- DPF0812W
www.insigniaproducts.com
Sides
#Description
1 Memory card slot, supports:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
•MemoryStick®
• Memory Stick Pro Duo™ (adapter required - not
included)
•xD™
• microSD™ (adapter required - not included)
2USB(typeA)port
3 Remote control slot
4MiniUSBport
5 DC 5 V power connector
DC5V IN
REMOTE

8" Digital Picture Frame
7
www.insigniaproducts.com
Top (buttons)
You can access most of the frame’s features by using either
the buttons on top of the frame or by using the remote
control. Selecting files for copying or deleting requires the
remote control, and the instructions in this guide refer to
remote control buttons (except where noted).
#Button Description
1 MENU/ To open the menu, quickly press and release.
To enter Standy mode, press and hold for two
seconds.
2 (left) Press to move the menu selection left or to
display the previous picture.
3 (right) Press to move the menu selection right or to
display the next picture.
4 ENTER/ Press to select menu items. During a slideshow,
press to pause or resume.
5 (up) Press to navigate up.
6 (down) Press to navigate down.
7 BACK Go back to previous selection or screen.
/

8
NS- DPF0812W
www.insigniaproducts.com
Remote control
# Button Description
1 DISPLAY Press to toggle the multi-image
display mode.
2XSLIDESHOW Press to start a slideshow.
3S(Up) Press to move the selection up.
4 /ENTER Press to select the highlighted option
or to pause and resume the slideshow.
ZOOM
RM-NSDPF0812W
MENU
TM
Digital Picture Frame
DISPLAY

8" Digital Picture Frame
9
www.insigniaproducts.com
5W(Left) PREV Press to move the menu selection left,
display the previous picture, or select
the previous file.
6T(Down) Press to move the menu selection
down.
7 BACK Press to go back a screen.
8 ZOOM Press to magnify the picture.
9 MENU Press to display the Setup menu.
10 (thumbnail/folder) Press to enter Thumbnail mode, or to
display files and folders.
11 X(Right) NEXT Press to move the menu selection
right, display the next picture, or select
the next file.
12 INFO Press to display information about the
picture.
13 SELECT Press to select a picture or file to copy
or delete.
14 DEL/COPY When reviewing pictures from
internal memory, press to delete
selected pictures.
When reviewing pictures from an
external, portable memory device,
press to copy selected pictures.
Note: Pressing this button does not
delete photos on the portable
memory device.
When you are in a thumbnail view, you
can press this button to start a
slideshow.
15 ROTATE Press to rotate the picture.
# Button Description

10
NS- DPF0812W
www.insigniaproducts.com
Setting up your picture frame
Setting up the remote control
To set up the remote control:
• Remove the plastic tab that extends past the
bottom edge of the remote control. This tab
protects the battery. The remote control will not
work until it is removed.
ZOOM
RM-NSDPF0812W
MENU
TM
Digital Picture Frame
DISPLAY

8" Digital Picture Frame
11
www.insigniaproducts.com
Setting up the frame
To set up the frame:
1Pull out the stand to set the frame in landscape
orientation.
2Turn the stand counterclockwise 90° to set the frame in
portrait orientation.
3Plug the AC power adapter into the frame’s DC power
connector and into an AC power outlet.
Made in China
THISCLASS (B) DIGITAL APPARATUSCOMPLIES
WITHCANADIAN ICES-003.
CETAPPAREIL NUMÉRIQUE DE LACLASSE (B)EST
CONFORMEÀ LA NORME NMB-003 DU CANADA.
Model:NS-DPF0812W
Power:5VDC, 1.0A (5W)
Testedto Comply with FCC Standards
FORHOME OR OFFICE USE
Manufacturedfor Insignia Products
7601Penn Avenue South
RichfieldMN USA 55423 Portrait
Landspace
Made in China
THISCLASS (B) DIGITAL APPARATUSCOMPLIES
WITHCANADIAN ICES-003.
CETAPPAREIL NUMÉRIQUE DE LACLASSE (B)EST
CONFORMEÀ LA NORME NMB-003 DU CANADA.
Model:NS-DPF0812W
Power:5VDC, 1.0A (5W)
Testedto Comply with FCC Standards
FORHOME OR OFFICE USE
Manufacturedfor Insignia Products
7601Penn Avenue South
RichfieldMN USA 55423 Portrait
Landspace

12
NS- DPF0812W
www.insigniaproducts.com
4Extend the stand from the back of the frame, then place
the frame on a flat surface. Push or pull the stand to
adjust the viewing angle.
5Slide the power switch to the ON position. The frame
automatically turns on and starts playing a slideshow of
the pictures stored in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control
at the front of the frame and press ENTER.
Using your picture frame
You can use your digital picture frame to:
• Play a slideshow of pictures
• Adjust a picture’s view
• Change display settings
Tip
You can also disable and re-enable Demo mode
from the Setup menu. For instructions, see
“Setup options” on page 25.

8" Digital Picture Frame
13
www.insigniaproducts.com
Playing slideshows
To play an instant slideshow from a portable
memory device:
1Insert a portable memory device into one of the
available memory slots or the USB port.
A slideshow of pictures from the portable memory
device automatically starts to play.
2Press ENTER/ to pause the slideshow on a
particular picture. Press ENTER/ again to resume
the slideshow.
Caution
Memory cards fit into the card slots in only one
direction. Do not force a memory card into a slot.
The card should fit snugly when inserted
correctly. Some cards require an adapter to fit
correctly. For more information on supported
memory cards, see “Specifications” on
page 30.

14
NS- DPF0812W
www.insigniaproducts.com
To manually play a slideshow from a portable
memory device or from internal memory:
1If the pictures you want to use are on a portable
memory device, insert the device into one of the
available memory slots or the USB port. A slideshow of
pictures from the portable memory device
automatically starts to play.
2Press (BACK) repeatedly until the Home menu
opens.
3Press Wor Xto select a portable memory device or
internal memory.
4Press XSLIDESHOW. A slideshow begins that displays
the pictures contained in the portable memory device
or internal memory.
Note
The option to select a portable memory device is
disabled if there is no device of that type in the
corresponding slot or port.
Tip
Press DISPLAY during a slideshow to switch to
multi-image slideshow mode. Press DISPLAY
again to return to single-image display mode.

8" Digital Picture Frame
15
www.insigniaproducts.com
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from a portable memory device to the frame’s
internal memory.
To copy selected pictures from a portable
memory device:
1Press (BACK) repeatedly until the Home screen
opens.
Notes
Using the frame alone, you cannot copy pictures
from the internal memory to a portable memory
device, and you cannot copy pictures from one
portable memory device to another.
Because you cannot copy pictures back from the
frame to a portable memory device using the
frame, the frame should not be considered your
primary picture storage method. Make sure that
you have the pictures stored elsewhere (such as a
memory card).

16
NS- DPF0812W
www.insigniaproducts.com
2Press Wor Xto highlight the portable memory device
you want to copy from, then press ENTER/ . The
Thumbnail screen opens.
3Press Wor Xto highlight each picture you want to copy,
then press SELECT to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to copy.
4Press DEL/COPY, then press Sor Tto
select Copy Selected (to copy the pictures you select)
or Copy All (to copy all pictures).
Tip
You can press (thumbnail/file list) to switch
between thumbnail mode and file list mode.
Thumbnail mode displays all files in the selected
portable memory device, and file list mode
displays files and folders.

8" Digital Picture Frame
17
www.insigniaproducts.com
5Press X, press Sor Tto select Yes, then press
ENTER/ . The pictures are copied.
To copy pictures from your computer to
internal memory or portable memory device:
1Make sure that your computer has been started before
you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any portable memory devices appear as “removable
disks.” Each memory area appears as a separate
removable disk.
On a Mac computer, the frame’s internal memory or an
external, a portable memory device appears as a USB
drive.
4Use your computer's standard drag and drop or copy
and paste procedures to move pictures on your
computer to the frame's internal memory or the
portable memory device.
To copy pictures from your internal memory
or external portable memory device to your
computer:
1Make sure that your computer has been started before
you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any portable memory device appear as “removable
disks.” Each memory area appears as a separate
removable disk.

18
NS- DPF0812W
www.insigniaproducts.com
On a Mac computer, the frame’s internal memory or a
portable memory device appears as a USB drive.
4Use your computer's standard drag and drop or copy
and paste procedures to move pictures from the frame's
internal memory or portable memory device to your
computer.
Deleting pictures from internal
memory
To delete pictures from internal memory:
1Press (BACK) until the Home screen opens.
Caution
Because you cannot copy pictures back from the
frame to a portable memory device, the frame
should not be considered your primary picture
storage method. Make sure that you have the
pictures stored elsewhere (such as a memory
card).

8" Digital Picture Frame
19
www.insigniaproducts.com
2Press Wor Xto highlight Internal Memory, then press
ENTER/ . The Thumbnail screen opens.
3Press W/X/S/Tto highlight each picture you want to
delete, then press SELECT to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to delete.
4Press DEL/COPY, then press Sor Tto
select Delete Selected (to delete only the pictures you
select) or Delete All (to delete all pictures in memory).
5Press Xto open the submenu, press Sor Tto select
Yes, then press ENTER/ . The pictures are deleted.

20
NS- DPF0812W
www.insigniaproducts.com
To delete pictures with your PC:
1Make sure that your computer is on before you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, and connect
the other end to an available USB port on your
computer.
3Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any portable memory card devices appear as
“removable disks.” Each memory area appears as a
separate removable disk.
On a Mac computer, the frame’s internal memory or an
portable memory device appears as a USB drive.
4Find and highlight the pictures you want to delete, then
use your computer's standard procedures to delete
pictures from the frame's internal memory or a portable
memory device.