Insignia IS-DA2G User manual

Insignia
NS-DA1G/IS-DA2G Digital Music Player
User Guide
Français Español
Contents
Welcome
Safety information
Features
Package contents
System requirements
Controls and connections
Display information
Setting up your music player
Installing the battery
Charging the battery
Connecting headphones
Installing the Best Buy Rhapsody software
Using your player
Turning your player on and off
Changing the volume
Locking the buttons
Navigating the on-screen menus
Playing music files
Getting more music
Copying music files to your player
Deleting files
Disconnecting the player
Listening to FM radio
Viewing photos
Changing settings
Maintaining your player
Care and cleaning
Updating the firmware
Troubleshooting and FAQ
Getting help
Troubleshooting and FAQ
Specifications
Legal notices
Pa
g
e 1 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Welcome
Congratulations on your purchase of a high-quality Insignia product. Your NS-DA1G or NS-DA2G
represents the state of the art in digital media players and is designed for reliable and trouble-free
performance. You can use your music player to play digital music files and listen to FM radio, and
you can carry it with you anywhere.
Safety information
Warnings
•Read, keep, and follow all instructions. Heed all warnings.
•Only use attachments and accessories approved by Insignia.
•Turn down the volume before turning on your MP3 player and avoid using it at a high
volume. Permanent hearing loss may occur if earphones or headphones are used at
high volume. Reduced volume also extends battery life.
•Do not use headphones or earphones while driving, cycling, or operating any motorized
vehicle. This may create a traffic hazard and may be illegal in your area.
•To reduce the chance of electrical shock, do not use or operate this device near moist
environments.
•Protect the power cord from being walked on or pinched.
•Unplug the player during lightning storms or when unused for long periods of time.
•Risk of explosion, damage, or battery leakage if the battery is incorrectly replaced
incorrectly or replaced by an incorrect type. Dispose of used batteries according to
local regulations.
•Clean only with a dry cloth.
•Do not defeat the safety purpose of the polarized-type plug. A polarized plug has two
blades with one wider than the other. The wide blade is provided for your safety. When
the provided plug does not fit into your power outlet, consult an electrician for
replacement of the obsolete outlet.
•Do not disassemble the player to access internal components (except for the battery)
under any circumstances.
Features
•Plays MP3, WMA, secure WMA, and Audible audio file formats.
•Displays JPG photos.
•Backlit LCD supports several languages and displays album art and song information.
•Digital FM radio tuner allows you to access local radio stations. The radio also
memorizes up to 20 of your favorite radio stations.
•Five preset equalizer settings to optimize playback for normal, rock, jazz, classical, and
pop music. You can also set a custom equalizer setting for a total of six to choose
from.
•Sophisticated music library sorting lets you browse the music in your player by artist,
album, song title, genre, and playlist.
•A-B Repeat lets you select any starting and end points during playback, so you can
repeatedly play that segment. This feature is especially helpful while learning
languages and words to songs.
•High-speed mini USB 2.0 port for fast and easy file transfers.
Pa
g
e 2 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

•Supports Microsoft WMDRM 10 technology.
•Fully compatible with Rhapsody and Napster-To-Go music services.
•Easy-to-use menus
•Upgradeable firmware to keep your music player up to date
•Replaceable, rechargeable battery.
Package contents
•Insignia digital music player
•Rechargeable lithium ion battery
•Earphones
•Mini USB 2.0 cable
•Quick Start Guide
•CD (contains Best Buy Rhapsody software and this online user guide)
•Carrying case
•Music offer
•Warranty card
System requirements
To transfer music from your computer to your music player, your computer must have the
following minimum system requirements:
•Windows XP
•Pentium-class CPU or equivalent
•One available USB 2.0 port
•Windows Media Player 10 (You can download Windows Media Player 10 from Microsoft
at: www.microsoft.com/windows/windowsmedia/download/default.asp)
•64 MB memory
•Active Internet connection (128+ Kbps broadband recommended)
Controls and connections
Front
Item Icon Function
A
Menu--Opens the on-screen menu for selecting songs and changing settings.
B
Rewind/Skip Back--Press to restart the current track, and press repeatedly to skip to previous tracks. Press and
hold to rewind. In FM radio mode, press to change frequencies.
Pa
g
e 3 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Bottom
Sides
C
Up--Press to scroll up through lists or change radio frequency presets.
D
Fast Forward/Skip/Next--Press to skip to the next track. Press and hold to fast forward. In menus, press to open
the next submenu or setting. In FM radio mode, press to change frequencies.
E
Power--Press and hold to turn on the player. Press and hold again to turn off.
F
Down--Press to scroll down through lists or change radio frequency presets.
G
Play/Pause/Select--Press to play or pause playback. In menus, press to select. In FM radio mode, press and hold
to change audio mode.
Item Icon Function
A Mini USB 2.0 port--Connect the USB cable to this port and your computer to charge the player and transfer
files.
B
Earphone jack--Connect earphones or headphones to this jack.
Item Icon Function
Pa
g
e 4 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Back
Display information
Setting up your music player
Installin
g
the batter
y
A
Volume up--Press to increase volume.
B
Volume down--Press to decrease volume.
C HOLD switch--Slide to disable all buttons.
D RESET button--Insert a pointed object to restart the player.
Item Function
A Battery cover--Remove the battery cover to insert or change the battery.
Item Function
A Status--Displays whether a track is playing or paused.
B File number--Lists the track number currently playing.
C Repeat icon--Indicates the current Repeat setting.
D Battery icon--Indicates the battery's power level.
E Artist name--Displays the artist name of the current track.
F Album name--Displays the album name of the current track.
G Track name--Displays the track title of the current track.
H Progress bar--Displays the progress of the song.
I Play time--Displays the elapsed time of the current track.
J Total time--Displays the length of the current track.
Volume (not shown)--Displays the current volume setting. Appears on the display only when the volume buttons are
pressed.
Pa
g
e 5 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

1. Slide off the battery cover on the back of the music player.
2. Press the battery into the battery compartment, then slide it into place. The battery should fit
snugly.
3. Slide the battery cover on until it snaps into place.
Charging the battery
Charge the battery whenever you aren't using the player to make sure it's always fully charged.
The battery charges in about two hours. A fully charged battery provides up to 18 hours of
continuous playback, depending on the brightness and display time of the backlight, and the
volume levels.
To charge the battery:
1. Turn on your computer.
2. Connect the supplied mini USB 2.0 cable to the mini USB jack on the player and a
standard USB jack on your computer. When the cable is connected correctly, the
player begins recharging its battery using the USB connection, and the message "OK
to disconnect" appears on the player.
As the battery charges, the blue battery icon shows an animation of being filled from right to
left, to illustrate that the battery is charging.
Pa
g
e 6 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

After the player is fully charged, the battery icon turns green, indicating a full charge.
Connecting headphones
You can use any headphones with a standard 1/16" stereo audio plug.
To connect headphones:
•Plug headphones or the provided earphones into the earphone/headphone jack on the
music player.
Installing the Best Buy Rhapsody software
To install the software:
1. Insert the Insignia software CD into your computer's CD drive. The software installation program
starts.
-OR-
If the installation program doesn't start automatically, double-click My Computer on your
desktop, double-click the CD drive that contains the Insignia CD, then double-click the file
rhapsodybestbuy.exe . The software installation program starts.
2. Follow the on-screen instructions to finish the installation.
Using your player
Turning your player on and off
To turn your player on and off:
1. Press and hold (Power).
Note
To use the FM radio, you must have the provided earphones connected, because they act as the FM
antenna. To substitute for the earphones, you can use any headphones with unshielded wires.
Tip
For iTunes Drag and Drop support, use File & Folder (MSC) USB mode. Your Insignia MP3 player will only
play iTunes MP3 files that you drag and drop from iTunes. For information on changing USB modes, "See
Manually changing the USB mode".
Pa
g
e 7 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

2. To turn off your player, press and hold (Power) again.
Changing the volume
To change the volume:
•Press the (Volume Up) and (Volume Down) buttons.
Locking the buttons
You can prevent accidental button operation by locking the buttons.
To lock the buttons:
1. Slide the HOLD switch in the direction of the arrow. An image of the hold button in the HOLD
position appears on the screen.
2. To unlock the buttons, slide the HOLD switch away from the arrow.
Navigating the on-screen menus
Use the on-screen menu to play music and change settings.
To navigate the on-screen menu:
1. Press (Menu). The main menu opens.
2. Press (Up) or (Down) to highlight one of the following menu items:
Pa
g
e 8 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

•Music
•FM Radio
•Music Library
•FM Settings
•Settings
3. Press (Next). The submenu of the item you selected opens. To navigate backwards
from a submenu, press (Previous).
Playing music files
To play music:
1. Press (Menu).
2. Press (Up) or (Down) to highlight Music Library, then press (Next). The music
library opens.
3. Highlight one of the following options, then press (Next) to open that category:
•Play All --Plays all tracks on the player.
•Artist --Lists all tracks arranged alphabetically by artist.
•Album --Lists all tracks arranged alphabetically by album. Even if you copied only one track
from an album to your player, that album name will appear in this list.
•Track --Lists all tracks arranged alphabetically by track title.
•Playlist --Lists all tracks arranged alphabetically by playlist.
•Genres --Lists all tracks arranged alphabetically by genre.
4. Select the content to play, then select Play All to play all the tracks in that selection. To play all
tracks starting with a specific track, select that track within the category. The player switches to
the Now Playing view, which displays information on the track currently playing.
To display album art (if available), press (Up). The album art appears on the left of the display.
5. If your selection does not begin to play, press (Play/Pause).
Tip
Press and hold the (Menu) button to return to the menu you were last navigating.
Tip
To navigate backwards from a submenu, press (Previous).
Pa
g
e 9 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

The track begins playing, and the play status icon ( ) appears in the upper left corner of the
display.
•To pause playback, press (Play/Pause). The pause status icon ( ) appears in the upper
left corner of the screen.
•To skip to the next track, press (Skip/Fast Forward). To skip to a previous track, press
(Skip Back/Rewind) repeatedly.
•To fast forward the current track, press and hold (Skip/Fast Forward). To rewind the
current track, press and hold Skip Back/Rewind).
•To restart the current track, press (Skip Back/Rewind) once.
Randomizing playback
You can play the tracks you selected in random order.
To play tracks in random order:
1. In the Settings menu, select Audio , then press (Next) or (Play/Pause).
2. In the Audio menu, select Shuffle , then press (Next) or (Play/Pause).
3. Press (Up) or (Down) to choose On or Off .
4. Press (Next) or (Play/Pause) to save your setting. The shuffle icon appears on the
Now Playing screen next to the battery icon.
Repeating tracks
To repeat tracks:
1. In the Settings menu, select
A
udio , then press (Next) or (Play/Pause).
Pa
g
e 10 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

2. In the Audio menu, select Repeat , then press (Next) or (Play/Pause).
3. Press (Up) or (Down) until you select All (repeat all tracks), One (to repeat a single
track), or Off .
4. Press (Next) or (Play/Pause) to save your setting. The Repeat 1 or Repeat All icon
appears on the Now Playing screen next to the battery icon.
Repeating segments of a track
You can use A-B repeat to repeatedly play a segment of a track. You must first enable A-B
repeat.
To enable A-B repeat:
1. Press (Menu). The main menu opens.
2. Press (Up) or (Down) to highlight Settings , then press (Next) or (Play/Pause).
3. Press (Up) or (Down) to highlight Audio , then press (Next) or (Play/Pause).
4. Press (Up) or (Down) to highlight A-B repeat , then press (Next) or
(Play/Pause).
5. Press (Up) or (Down) to highlight On or Off , then press (Next) to select. The
message "Use the down button (V) to activate A-B" appears, then the Audio Setting
menu opens again.
6. Press (Menu) to return to the Now Playing screen.
To repeat an audio segment:
1. During playback, press (Down) to mark the start of the playback loop. The Repeat icon on the
display shows an "A."
2. Press (Down) again to mark the end of the playback loop. The Repeat icon on the display
shows an "AB" and the player repeats that audio segment indefinitely.
3. Press (Down) again to cancel the repeating loop.
Using the equalizer
Six equalizer settings are available, and five are preprogrammed: Normal, Rock, Jazz, Classic,
and Pops. The User setting lets you customize the equalizer to your preference.
To select a pre-programmed equalizer setting:
1. In the Settings menu, select Audio , then press (Next) or (Play/Pause).
2. In the Audio menu, select Equalizer , then press (Next) or (Play/Pause).
3. Press (Up) or (Down) to select the equalizer setting you want.
4. Press (Next) or (Play/Pause) to save your new settings.
To change the equalizer's custom setting:
1. In the Settings menu, select Audio , then press (Next) or (Play/Pause).
2. In the Audio menu, select Equalizer , then press (Next) or (Play/Pause).
3. Press (Up) or (Down) to select the Custom setting.
4. Press (Next) to move the cursor to the first equalizer setting dial.
5. Press (Up) or (Down) to adjust the setting. Repeat this step to adjust each
remaining dial.
Pa
g
e 11 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

6. Press (Play/Pause) to save your new settings.
Getting more music
Your music player already contains some music files, but you can get more music from your own
music CDs and from the Internet.
Getting music from CDs and the Internet to your music player involves two steps:
1. Rip a CD (create files of the music on the CD) or download music files from the Internet.
2. Select the files to copy and copy them to your player.
Getting more music on your computer
Getting music from CDs
To rip a CD:
1. Click Start , All Programs , Best Buy Rhapsody , Best Buy Rhapsody . Best Buy Rhapsody
opens.
2. Put a music CD in the CD drive. Rhapsody lists the tracks on the right side of the screen. If you
are connected to the Internet, the list shows the track names.
3. Click Import CD . Rhapsody creates MP3 files from the music tracks on the CD and lists them
under the My Library folder.
For information on transferring your music files to your music player, "See Copying music files
to your player".
Pa
g
e 12 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Getting music from Rhapsody
To buy and download music files from the Internet:
1. Click Start , All Programs , Best Buy Rhapsody , Best Buy Rhapsody . Best Buy Rhapsody
opens.
2. In the Search box, type the name of the artist or album you want to download music for, then
click Go . Any matches that Rhapsody finds are displayed on the screen.
3. Decide which tracks or albums you want to buy, then click BUY next to the music you
want.
4. Follow the on-screen directions to finish the purchase. The music files are added to your
Rhapsody music library.
Copying music files to your player
Copying files using Rhapsody
To copy files from your computer to the music player using Rhapsody:
1. Connect the USB cable to a USB port on your computer and the mini USB port on your
player. The message "Searching for PC" appears on the player.
Tip
You can also use other digital music management programs to get music files from the Internet. See the
program's online help for more information.
Tip
For iTunes Drag and Drop support, use File & Folder (MSC) USB mode. Your Insignia MP3 player will only
play iTunes MP3 files that you drag and drop from iTunes. For information on changing USB modes, "See
Manually changing the USB mode."
Pa
g
e 13 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Your computer detects the player, and adds the player as a new device ("Insignia Music
Player") in the My Computer list of drives in Windows.
2. Click Start , All Programs , Best Buy Rhapsody , Best Buy Rhapsody . Best Buy
Rhapsody opens.
3. Close any popup windows that open.
4. Click My Library in the list of content types. Your entire library of digital music appears
in the right side of the screen.
5. Click the Transfer tab in the lower left area of the Rhapsody window (#5 in the following
graphic).
6. Click and drag files from the library to the Transfer list. (#6 in the above graphic).
7. When you have dragged all files that you want to copy to the transfer list, click the
Transfer button (#7 in the graphic). The files are copied to your player. The message
"Synching: Do not Disconnect" appears on the player.
When the copying is complete, the message "OK to disconnect" appears on the player.
8. Unplug the USB cable from your computer and your player.
Pa
g
e 14 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Copying files using Windows Explorer
To copy music files from your computer to your player using Windows Explorer:
1. On your player, press (Menu), select Settings , then press (Next).
2. Select USB Mode , then press (Next).
3. Highlight Media Manager (MTP) or File & Folder (MSC), then press (Next) or
(Play/Pause) to save the setting.
•Use Media Manager (MTP) mode to you copy WMA and MP3 files to the Media folder, and
any other file formats to the Data folder (you cannot see the Data folder using the player's
display). Depending on which media manager software (such as Rhapsody, Windows Media
Player, and many others) you use, the name of the subfolders may be different than "Media"
and "Data."
•Use File & Folder (MSC) mode to copy folders and any format of files to the player's root
folder. The player will still only play MP3 and WMA files.
4. Connect your player to the computer using the provided USB cable. The message "Searching
for PC" appears on the player.
1. On your computer, click Start , My Computer, then double-click the folder where your
music files are.
2. Open My Computer again to open another window, then open the Insignia Music
Player drive. (When your computer detected the player, it added the player as a new
device called "Insignia Music Player" in the My Computer list of drives in Windows.)
3. Click and drag the music files from your computer to the player:
If your player is in Media Manager (MTP) mode, copy them to the Media folder on the player.
If your player is in File & Folder (MSC) mode, copy them to the root folder on the player.
When the copying is complete, the message "OK to disconnect" appears on the player.
4. Unplug the USB cable from your computer and your player.
Deleting files
To delete files from your player using the on-screen menu:
1. Press (Menu). The main menu opens.
2. Select Settings , then press (Next) or (Play/Pause).
3. Select System , then press (Next) or (Play/Pause).
4. Select Erase All , press (Next).
5. Select Yes , then press (Next) or (Play/Pause). All media files are deleted.
To delete files from your player using your computer:
1. Connect the USB cable to a USB port on your computer and the mini USB port on your
player. The message "Searching for PC" appears on the player.
Tip
To select multiple files, press and hold Ctrl on your keyboard while clicking the files with your mouse. To
select an entire range of files, click the file at the top of the range, press and hold Shift on your keyboard,
then click the file at the bottom of the range.
Pa
g
e 15 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Your computer detects the player, and adds the player as a new device ("Insignia Music
Player") in the My Computer list of drives in Windows.
1. Click Start, then click My Computer .
2. Double-click the Insignia Music Player device, then open the Media folder.
3. Find the files you want to delete, click to select them, then press Delete on your
keyboard. The files are deleted.
Disconnecting the player
After you have connected the player to a computer for recharging or music transfer, you need to
safely disconnect the player.
To safely disconnect the player from your computer:
•When the player displays the message "OK to disconnect," unplug the USB cable from
the player and the computer.
Listening to FM radio
You can listen to FM radio broadcasts on your player.
Tuning the radio
To tune to an FM radio station:
1. Plug your earphones into the earphone jack.
2. Press (Menu). The main menu opens.
3. Select FM Radio , then press (Next) or (Play/Pause).
4. Press (Previous) or (Next) to change the frequency in increments of 100 KHz.
5. To change between Stereo and Mono audio modes, press (Play/Pause).
Setting station presets
Station presets let you quickly access your favorite frequencies.
Tip
To select multiple files, press and hold Ctrl on your keyboard while clicking the files with your mouse. To
select an entire range of files, click the file at the top of the range, press and hold Shift on your keyboard,
then click the file at the bottom of the range.
Note
To use the FM radio, you must have the provided earphones connected, because they act as the FM
antenna. To substitute for the earphones, you can use any headphones with unshielded wires.
Tip
Mono mode can help reduce static when listening to stations that have a weak signal.
Pa
g
e 16 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

To set station presets manually:
1. Tune to an FM radio station frequency.
2. Press and hold (Play/Pause). The station is added as a preset.
To set station presets automatically:
1. Press (Menu). The main menu opens.
2. Select FM Settings , then press (Next) or (Play/Pause).
3. Select Auto Scanning , then press (Next) or (Play/Pause). The player scans the
radio range and flashes the message "Auto Scanning."
While scanning, the player automatically adds a preset for any local strong stations until all 20
preset channels have been set.
To delete station presets:
1. Press (Menu). The main menu opens.
2. Select FM Settings , then press (Next) or (Play/Pause).
3. Select Preset Delete , then press (Next) or (Play/Pause).
4. Press (Up) or (Down) to select the preset to delete, then press (Next) or
(Play/Pause). The preset is deleted.
A
ccessing station presets
To access station presets:
1. Press (Menu). The main menu opens.
2. Select FM Radio , then press (Next) or (Play/Pause).
3. Press (Up) to access the previous preset channel, or press (Down) to access the
next preset channel.
Viewing photos
Your player can display JPG and JPEG photos. No other photo formats are supported. To display
non-JPG/JPEG photos, you must first convert them to JPG or JPEG using photo editing software
on your computer.
To view photos:
1. Press (Menu). The main menu opens.
2. Select Photo , then press (Next) or (Play/Pause). A list of available photos
appears.
3. Press (Previous) or (Next) to view the previous or next list of photos.
Tip
The larger the photo file, the longer the time it takes to view it. To size photos for theplayer's screen (and
reduce their file size), resize copies of them to 128 x 80 using photo editing software on your computer.
Pa
g
e 17 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

4. Press (Up) or (Down) to select the select the photo to display, then press (Next)
or (Play/Pause). The photo displays full screen.
•Press (Previous) or (Next) to skip forward and backward.
•Press (Play/Pause) to enter zoom mode, then press the direction buttons to pan the
image.
•Press (Up) to rotate the photo 90°.
Copying photos to your player
The method you use to copy photos from your computer to your player depends on the USB
mode your player is set to.
To copy photos from your computer to your player using File & Folder (MSC) USB mode:
1. On your player, press (Menu), then select Settings , then press (Next).
2. Select USB Mode , then press (Next).
3. Highlight File & Folder , then press (Next) or (Play/Pause) to save the setting.
4. Connect your player to the computer using the provided USB cable. The message
"Searching for PC" appears on the player.
5. On your computer, click Start , My Computer , then double-click the folder where your
photo files are.
6. Open My Computer again to open another window, then open the Insignia Music
Player drive.
7. Click and drag the photo files from your computer to the player's root folder.
When the copying is complete, the message "OK to disconnect" appears on the player.
8. Unplug the USB cable from your computer and your player.
To copy photos from your computer to your player using Media Manager (MTP) USB mode:
1. On your player, press (Menu), then select Settings , then press (Next).
2. Select USB Mode , then press (Next).
3. Highlight Media Manager (MTP), then press (Next) or (Play/Pause) to save the
setting.
4. Connect your player to the computer using the provided USB cable. The message
"Searching for PC" appears on the player.
5. On your computer, click Start , My Computer , then double-click the folder where your
photo files are.
6. Open My Computer again to open another window, then open the Insignia Music
Player drive.
7. Click and drag the photo files from their current location to the Media folder on your
Insignia Music Player drive.
When the copying is complete, the message "OK to disconnect" appears on the player.
8. Unplug the USB cable from your computer and your player.
Tip
To select multiple files, press and hold Ctrl on your keyboard while clicking the files with your mouse. To
select an entire range of files, click the file at the top of the range, press and hold Shift on your keyboard,
then click the file at the bottom of the range.
Tip
To select multiple files, press and hold Ctrl on your keyboard while clicking the files with your mouse. To
select an entire range of files, click the file at the top of the range, press and hold Shift on your keyboard,
then click the file at the bottom of the range.
Pa
g
e 18 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Deleting photos
To delete photos, "See Deleting files".
Changing settings
Changing brightness, rotation, and backlight settings
To change the brightness, rotation, and backlight settings:
1. Press (Menu). The main menu opens.
2. Select Settings , then press (Next) or (Play/Pause).
3. Select Display , then press (Next) or (Play/Pause). The Display menu opens.
4. Change any of the following settings:
Brightness --Changes the brightness of the backlit screen.
Rotation --Rotates the screen and flips the button functions to make left-handed use of the
player easier. Default is Right Handed .
Backlight --Changes the length of time that the backlight stays on after you press a button.
The backlight may noticeably decrease battery life if it is left on for long periods of time.
Changing power off and sleep settings
To change the power off and sleep settings:
1. Press (Menu). The main menu opens.
2. Select Settings , then press (Next) or (Play/Pause).
3. Select Time , then press (Next) or (Play/Pause). The Time menu opens.
4. Change any of the following settings:
Power Off --Adjusts the length of time without any button presses that the player waits before
automatically turning off. You can select Of
f
or a time up to ten minutes.
Pa
g
e 19 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...

Sleep --Changes the length of time the player waits before automatically turning off,
regardless of button presses or other activity. You can select 30-minute time increments up to
120 minutes.
Erasing all files and restoring factory defaults
To erase all files and change all settings to factory defaults:
1. Press (Menu). The main menu opens.
2. Select Settings , then press (Next) or (Play/Pause).
3. Select System , then press (Next) or (Play/Pause). The System menu opens.
4. Change any of the following settings:
Erase All --Erases all music files from the player.
System Init --Resets all player settings to the factory defaults.
Manually changing the USB mode
The music player can use two USB modes, Media Manager (MTP, the default) mode and File &
Folder (MSC) mode.
To manually change the USB mode:
1. Press (Menu). The main menu opens.
2. Select Settings , then press (Next) or (Play/Pause).
3. Select USB Mode , then press (Next) or (Play/Pause). The USB Mode menu
opens.
4. Select any of the following settings:
Media Manager (MTP)--Optimum setting for using the player as a music player.
File & Folder (MSC)--Optimum setting for using the player as a file storage device, and
required for using iTunes Drag and Drop Support.
Viewing system information
Your player can tell you its total memory, used memory, available memory, and other system
information.
To view system information:
1. Press (Menu). The main menu opens.
2. Select Settings , then press (Next) or (Play/Pause).
3. Select Information , then press (Next) or (Play/Pause). The Information screen
opens, displaying memory use, firmware version, and date.
Maintaining your player
Care and cleanin
g
Pa
g
e 20 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...