ENGLISH 12-0350
Making connections
To connect your monitor:
1Connect the power cord (A) to the monitor, then to a properly grounded
AC outlet.
2Make sure that both the monitor and the computer are powered OFF.
Connect the VGA cable (B) to the computer, then to the monitor.
OR
Connect a DVI cable (not included)(C) from the DVI output of the
computer to the DVI input of the monitor.
If your PC has an HDMI output, you can use an HDMI to DVI cable (not
included).
3Turn on the computer, then the monitor.
4If you are using Windows, you may need to set the resolution and refresh
rate. (example: 1600 × 900 @ 60 Hz)
• Windows 7:
1Click the Start button and select Control Panel.
2Under Appearance and Personalization, click Adjust screen
resolution.
3Click the drop-down list next to Resolution, move the slider to the
resolution you want, then click Apply.
4Click Keep to use the new resolution, or click Revert to go back to
the previous resolution.
• Windows Vista:
1Click the Start button and select Control Panel.
2Click Appearance and Personalization, then click Display Settings.
3Under Resolution, move the slider to the resolution you want, then
click Apply.
• Windows XP:
1Right-click on your desktop and select Properties.
2Click the Settings tab at the top of the window.
3Under Resolution, move the slider to the resolution you want, then
click Apply.
OR
If you are using a Mac you may need to set the resolution.
• Open the Apple menu and select System Preferences.
• Click Displays, then click Display.
• Select the appropriate resolution from the Resolutions list.
Using the on-screen display (OSD)
To use the on-screen display (OSD) menus:
1Press the MENU button to open the menus. The Main Menu opens.
2Press or to select a menu item, then press OK to go to that
sub-menu. You can select:
• Auto Image Adjust: to auto adjust Horizontal Position, Vertical
Position, Phase (Fine Tune) and Clock (H. Size) of the screen.
Available in analog mode only (VGA cable connection).
• Contrast/Brightness
• Contrast
• Brightness
• Backlight
• Input Select
• Color Adjust
• Warm
• Normal
• Cool
• User Color: to manually adjust the color levels. Press OK to select
the color to adjust.
• Information: to display information on the current input signal.
• Manual Image Adjust
• Horizontal Size
• H./V. Position
• H. Position
• V. Position
• Fine Tune: to ne tune the phase and clock.
• Sharpness: to adjust the clarity of image, when running below the
native resolution (1600 × 900).
• Video Mode Adjust: select Full Screen, Over Screen, or Aspect
Ratio.
• Color Vision Mode: to select a preset display environment. You can
select Standard, Game, Cinema, Scenery, Text, or ECO.
• Setup Menu
• Language Select
• OSD Position
• H. Position
• V. Position
• OSD Time Out: to automatically turn o the (OSD) after a preset
period of time.
• Memory Recall: to reset all settings to factory default. Press OK.
3When the sub-menu opens, press or to go to the item you want to
adjust, then press OK to select that item.
4Press or to adjust the item you selected, then press MENU to exit
the menu.
For more detail on menu choices, please refer to the online User Guide.
Troubleshooting
For troubleshooting information, see your online User Guide.
Specications
For specications information, see your online User Guide.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
© 2012 BBY Solutions, Inc., Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
OR
WE ARE GOING GREEN!
A copy of your User Guide is not provided
in the box but is available online.
Go to www.insigniaproducts.com,
click Support & Service, enter your model
number in the Product Search eld,
then click Search.
MENU: Exit OK: Select
