InSinkErator Indulge Contemporary F-HC1100 User manual

5-1/ 4"
5-1/ 2"
3-3 /4"
6-1/8"
8-3/4"
8-3/4"
6-3/4"
11"
NOTE: Max counter thickness is 3".
Cold Side
Water Supply
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4"Incoming
Water Supply
Minimum 2-5/8" required
from sink hole center
to backsplash
Dimensions
HWD366-11K-45-02
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model F-HC1100 with 2/3-gallon
stainless steel tank, adjustable temperature
from 160°F to 210°F and instant, self-closing
hot valve.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Printed in USA
1-800-558-5700
www.insinkerator.com
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right to change or discontinue models.
© 2011 InSinkErator, a division of
Emerson Electric Co. All Rights Reserved.
Complies with Lead Plumbing Law
The Next
Necessity™
Our finest line of instant hot water dispensers
for use with our Stainless Steel Tank for filtered
near-boiling 200°F and cool drinking water
Tank and filter sold separately (SST-FLTR)
Instant Hot Water Dispensers
F-HC1100
Submittal Sheet
• Hot & Cool – Dispenses near-boiling
200°F water and cool drinking water
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
levers provides a dramatic look
• Hot lever automatically shuts off, while
Stay-On™ cool lever remains on for easy use
• Durable all brass faucet construction
• 5-Year We Come To You® In-Home
Service Warranty*
• For use with InSinkErator Stainless Steel
Tank and F-201 Filtration System
• Available in these designer finishes:
white, biscuit, French gold, satin nickel,
polished nickel, chrome, brushed chrome,
mocha bronze, oil rubbed bronze, matte
black and gloss black
Specifications
Shipping Weight
Instant, self-closing
Required
Hole Diameter
1 -3/8" – 1 -1/2"
standard sink hole
Hot Valve
Manual return
Cold Valve
Approximately
4.0 lbs.