InSinkErator Model SST-FLTR User manual

INSTANT HOT WATER DISPENSERS
Submittal Sheet
Stainless Steel Tank dispenses filtered
near-boiling 200°F water instantly.
•
•
Form No. HWD 301-05H-19-12
The Emerson logo is a trademark and
a service mark of Emerson Electric Co.
In-Sink-Erator is a division of
Emerson Electric Co.
©IN-SINK-ERATOR Printed in USA
Job Specifications
Stainless Steel Tank with F-201 Filtration System*
Model SST-FLTR
DRAIN PLUG
ADJUSTABLE
THERMOSTAT
11"
6.125"
Dimensions
DEPTH IS 6.75"
Specifications
Capacity
Electrical
Thermostat
Insulation
Shipping Weight
gallon tank
dispenses 60 cups of
200ºF water per hour
120 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong
plug
Snap-action,
adjustable from
160ºF to 210ºF
(factory pre-set
at 200ºF)
Meets U.L. 94HF-1
flammability
specification
Recommended
Supply Pressure
30-125 psi
Approximately
4.2 lbs.
•F-201 Filtration System included for
fresher tasting water
•35% more near-boiling water from larger
gallon stainless steel tank
•Easy to adjust temperature control
•Tool-free tank connections and dry start
protection to ease installation
•Provides 60 cups/hour of near-boiling water
•3-Year We Come To You™ In-Home
Service Warranty*
•120 volts, 750 watts, 6.25 amps
•For use with In-Sink-Erator Series 1100 and
other dispenser models (Not for use with Model Hot1)
* The complete In-Sink-Erator warranty is
included in the Installation, Care & Use Booklet
packed with each unit.
Sample Specification
•Capacity: gallon tank dispenses 60 cups of
200°F water per hour
•Electrical: 120 volts A.C., 750 watts, 6.25 amp
heating element with grounded three (3)
prong plug
•Thermostat: Snap action, adjustable from 160°F
to 210°F (factory pre-set at approximately 200°F)
•Insulation: Meets U.L. 94HF-1 flammability
specification
•Shipping Weight: Approximately 4.2 lbs.
•Recommended Supply Pressure: 30-125 psi
To ensure optimum performance, maximum
distance between tank and dispenser head
should be 16" or less.
*Water dispenser sold separately
23
23