Insta360 ONE X User manual

QUICK START GUIDE
English /

9
Camera Overview
Lens Battery hatch buckleOLED screen LED indicator
LED indicator
Speaker
Standard 1/4'' bolt
Micro SD card slotMicro USB interface
Shutter / Enter key Power / Switch key
Microphone
Microphone

10
Preparation before Use
Before using the camera, please release the battery hatch buckle, open the battery hatch and insert the
included lithium battery.
❶
Note:
It is suggested to use the power adapter of 5V/2A to charge the camera. You can also use Insta360 ONE X's
officially recommended charger (sold separately) to charge the camera.

11
Note:
1) This camera supports Micro SD card with UHS-3 or V30 (or above) format. As for the memory, up to
128GB can be supported.
2) For long time recording, a video will automatically be stored in several separate files.
Before using the camera, please insert an Micro SD card (sold separately).
❷

12
Independent Use
Key 1: Shutter / Enter key
Key 2: Power / Switch key
Definition of keys
Basics
Key 1
Key 2
* More features of the camera will be updated, and you can visit https://www.insta360.com/r/onexdetail .
Power on + Power off
Press Key 2 to power on the camera; Press and hold Key 2 to power off the
camera.
Take photos
When the camera is on, it is in the photo mode by default. Press Key 1 to
take photos.
Shoot videos
When the camera is on, press Key 2 to switch the camera mode to video
mode and then press Key 1 to start shooting videos. While shooting a
video, press Key 1 to stop the recording.

13
Wireless Connection
Press Key 1 (the smaller key) to power on the camera.
❶
Scan the QR code as shown on the right or search
"Insta360 ONE X" in App Store to download the
companion app.
❷
Having successfully installed the app, tap the
wireless connection icon on the top left corner
of the Album page in the app. And then the prompt
of "Searching for camera" will pop out. Select
the camera and follow onscreen instructions to
complete the connection.
❸Wireless
connection
Album
9 41
本地
相机
04-12
ALBUM
SET
CREATIVE
EXPLORE

14
Having successfully connected to the camera, you can take photos or shoot videos via the app.
❹
Note: Only when in wired connection, will the 360° live and animation live be enabled.
Back Remaining battery
360° live
Animation live
Settings
Filter
Album
Video
Shutter
Photo

15
Wired Connection
We provide different connection cables according to different connecting interfaces. Once your phone is
connected to the camera via the compatible cable, you can open the app and tap the Shutter button to take
photos. With wired connection, you can also broadcast 360° live or animation live.
Connect to iPhone Connect to Android smart phone
or

16
Bluetooth Wakeup
When you let your camera stay inactive for an extended long period, it will enter the standby mode. Press any
key of the camera to exit the standby mode. You can also configure Bluetooth settings in the app to wake up the
camera.
Notes
Please power off while not use to avoid any injury.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changers or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.