InstaMagic HQT-906 User manual

In mere seconds, this tool evenly distributes heat without
damaging your tresses in the process and you control the level of
volume. Plus, it's simpler than ever to use, no clips or fuss, you
simply brush your hair—it doesn't get easier than that!
HOW TO USE:
Ensure your hair is dry. Choose your desired temperature.
We recommend you begin with 180˚C/365˚F and change the
temperature according to your desire. Use caution while straightening
hair to make sure your finger doesn’t mistakenly hit the power and
temperature buttons located on the side of the brush.
As you apply the brush, ensure your hair penetrates deep into the
bristles. You can do this by moderately stretching the
hair with the other hand like you would use a
regular iron.
Brush slowly to ensure maximum heat is
absorbed into the hair. Straighten from the
root to the end of your hair in a slow pulling
motion. You can use the brush on the inner
or outer side of your hair. Do not brush too
much hair at once, if you want to brush
more hair you should slow down the speed
of brushing in the process.
If you straighten your hair often we
recommend you use some type of thermal
heat protection spray (sold separately). To
reduce frizz, we recommend using an oil-
based conditioner.
The InstaMagic Hair Straightener is
safe to use for all types of hair;
including chemically-treated,
permed and colored hair.
Fast Hair Straightener
HQT-906

HOW TO CLEAN THE BRUSH:
Begin by turning the iron off and unplugging it.
While it is still warm, moisten a cloth with water. You want it to
be wet, but not dripping. Rub the moist cloth over the surfaces
to remove as much of the buildup as possible. To remove the
remaining residue, spray an iron cleaner (not included) onto the
surfaces. Wipe it clean with a clean, soft cloth. Follow this with a
cloth moistened with water. Repeat as necessary. Allow the iron to
dry completely before plugging it back in to use.
Questions or comments?
Visit www.hairstraightenr.com
Power Button
Press for three
seconds to turn
on or off.
Swivel Cord
LED
Temperature
Display
Heat Proof
Outer Shell
Place this side
down after use
Temperature
Settings
Press the +
and -buttons
simultaneously
to switch
between Celsius
and Fahrenheit.
Anti-scald
Teeth