INSTEON 2732-532 User manual

www.insteon.com.au
INSTEON Wireless Thermostat 2732-532
Overview
You can link up to two INSTEON Wireless Thermostats to an INSTEON Thermostat, allowing you to
control the HVAC system from anywhere in the house. When linked to an INSTEON Thermostat, the
INSTEON Wireless Thermostat can serve as the master thermostat over the HVAC system; just press
and hold the Master button, wait for the beep and release. When “Master” appears below the large
temperature display, your Wireless Thermostat is now the primary thermostat.
How it works
Additionally, you can use the INSTEON Wireless Thermostat as a standalone controller, activating
scenes to turn on heaters and fans based on the room’s temperature and/or humidity status.
• When the A/C kicks in, turn on your ceiling fans to help cool down your home more efficiently
• If the humidity level climbs too high, turn on a dehumidifier with an INSTEON Appliance module
• Program a daily “Return” mode that turns on your A/C and switches on your outside lights so you
come home to a safe, relaxing and comfortable home
• Set-up custom heating and cooling routines for individual days, weekdays, weekends, morning or
night allowing you to take control of your comfort and energy bills.
Place a thermostat anywhere you want with the INSTEON
Wireless Thermostat linked to your INSTEON Thermostat.
Put it in the master bedroom, in the kitchen, in the guest
room--anywhere you want room-specific, customised tem-
perature control. You can add up to two INSTEON Wireless
Thermostats to your INSTEON Thermostat.
• Use as an INSTEON temperature and/or humidity controller
• Use as a wireless controller of the INSTEON Thermostat
• Make the temperature comfortable in any room
• Battery-powered with optional power supply connection
• Award-winning INSTEON dual-mesh technology

www.insteon.com.au
Specifications 2732-532
General
Product Name: INSTEON Wireless Thermostat
Product Code: 2732-532
Recommended Retail Price: $99
In the box: INSTEON Wireless Thermostat, 2 x AA Batteries, Quick Start Guide
Warranty: 2 Years
INSTEON
INSTEON Power line Mesh Repeater: No, uses battery power
INSTEON RF Mesh Repeater: Yes, with DC power adapter (sold separately)
INSTEON Controller: Yes
INSTEON Responder: No
Maximum links/scenes: 400
Status LED: Dual-color red/green, blinks during setup
LED brightness: LED can be enabled or disabled locally or via software
Local Control: No
Commands supported as controller: On / Off
Commands supported as responder: N/A
Software configurable: Yes
RF range: Up to 50 meters open air
Mechanical
Mounting: Wall mount or tabletop stand (included)
Casing: UV stabalized plastic (INSTEON White)
Wire Connections: N/A
Set button: Yes
Beeper: Yes
Beep on button press: Optional (off by default)
LED: Two-color: Green and Red
Dimensions & Weight: 145mm W x 87mm H x 28mm D - 249g
Operating Conditions: Indoors, 0° C to 40° C, up to 90% relative humidity
Electrical
Supply Voltage: 2 AA batteries (included) or 5VDC adapter (sold separately)
Frequency: 50/60Hz auto-detected at power-up
Retain all settings without power: Yes, saved in non-volatile EEPROM
Standby power consumption: 22 micro-Amps
Safety approved: Approved for use in Australia and New Zealand