InStyler titanium User manual

USER MANUAL
For best results, go to
www.instyler.co.uk
for Video Tips & Techniques

2
InStyler®Rotating Iron
2
IMPORTANT SAFETY INFORMATION
WARNINGS: TO REDUCE THE RISK OF SERIOUS INJURY,
READ ALL INSTRUCTIONS AND WARNINGS COMPLETELY
BEFORE USING THIS PRODUCT
InStyler Rotating Iron has been carefully engineered for both ef-
fectiveness and safety, however, basic safety precautions should
always be followed when using any product, especially when
children are present.
• INSTYLERROTATINGIRONISNOTINTENDEDFORUSEBYCHILDREN.
• KEEPAWAYFROMWATER.
• DANGER-As with most electrical appliances, electric parts are electri-
cally live even when the switch is o. To reduce the risk of electric shock:
1. ALWAYSUNPLUGITIMMEDIATELYAFTERUSING.
2. DONOT use while bathing or showering.
3. DONOT place or store InStyler Rotating Iron where it can fall or be
pulled into a tub, toilet or sink or any other water source.
4. DONOT use InStyler Rotating Iron near water.
5. DONOT place in or drop into water or other liquid.
6. If InStyler Rotating Iron falls into water, DONOTREACHINTOTHE
WATER! Unplug it immediately.
• WARNING:TOREDUCETHERISKOFBURNS,FIRES,ELECTRICAL
SHOCK,DEATH,INJURYORDAMAGETOPROPERTY:
1. Counterfeit versions of the InStyler Rotating Iron do exist. To
ensure you have purchased a genuine product, and to reduce the
risk of burns, electrical shock and malfunctions, purchase from
authorized dealers only.
2. Use InStyler Rotating Iron only for its intended use as described in
this manual. DONOT use attachments not recommended by the
manufacturer.
3. NEVER operate the InStyler Rotating Iron if it has a damaged cord
or plug, if it is not working properly, if it has been dropped or dam-
aged or if it has been dropped into water. If the power supply cord
or plug is damaged, the InStyler Rotating Iron must be replaced by
the manufacturer or an authorized service agent in order to avoid
a hazard.
4. Keep this product and the cord away from water and heated
surfaces. DONOTwrap the cord around the InStyler Rotating Iron
until unit is completely cool.
5. This product has moving parts. Children and pets should be kept
away when product is in use.

3For more tips, tricks and videos visit, www.instyler.co.uk 3
6. The InStyler Rotating Iron should NEVER be left unattended when
plugged in.
7. NEVER use while sleeping.
8. NEVER drop or insert any object into any opening or hole on The
InStyler Rotating Iron.
9. DONOT operate outdoors or where aerosol (spray) products are
being used or where oxygen is being administered.
10. DONOT use an extension cord with the InStyler Rotating Iron.
11. The InStyler barrel and unit bottom may be hot during use. DO
NOT allow eyes or skin to touch the heated surfaces.
12. DONOT place InStyler on any unprotected surface while it is oper-
ating or cooling down after use, except for the InStyler carrier/mat,
which has been provided.
13. DONOT operate with a voltage converter.
14. This product is designed for hair styling. DONOT use for any other
purpose.
15. This product is a personal care device and is NOT intended for
commercial use.
16. DONOT use this product if any parts become damaged. Inspect
the InStyler product prior to beginning hair styling to ensure all
parts are secure in their place.
17. DONOT subject this product to excessive force or shock that may
result in malfunction, shorter life span or distorted parts.
18. DONOT tamper with this product’s components. Doing so may
cause unnecessary damage. This product contains no user-service-
able parts.
19. DONOT use liquid cleaners, aerosol cleaners, or any cleaner
containing alcohol, detergent, abrasive or corrosive materials.
20. The InStyler Rotating Iron should be used only on clean dry hair.
21. DONOT use the InStyler Rotating Iron if you are 12 years or
younger.
22. This appliance is not intended for use by persons (including
children) with reduced physical sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
23. Children should be supervised to ensure that they do not play with
the appliance.
• IMPORTANT:The InStyler Rotating Iron should NEVER be used with any
type of synthetic hair extension. The InStyler can be used on real human
hair extensions ONLY, with the following precautions. If your real human
hair extensions are sewn in, you can use your InStyler up to the scalp. If
your real human hair extensions are glued in, make sure you start with
your InStyler below the glue.

4
InStyler®Rotating Iron
Introduction and Getting Started
CONGRATULATIONS! You have just purchased the most versatile
hairstyling tool available today. From sleek, smooth styles to glam-
orous, curly looks, and everything in between, the InStyler is the
only tool you’ll need for dynamic, fabulous styles every day!
“Go Slowly!”
• Become familiar with how the InStyler works with your hair.
Your instinct will be to glide the InStyler through the hair
quickly, but you will achieve much better results by going
slowly. Even though you’re moving the unit slower, you will still
get results faster than using a curling iron or a flat iron. The
unique rotating barrel does most of the work for you.
• Experiment with it and be creative. You will quickly see what
this innovative tool can do. The styling tips on the following
pages will help give you some ideas of what is possible. You will
become more ecient at styling your hair each time you use
your InStyler.
IMPORTANT!
For best results, go to
www.instyler.co.uk
for Video Tips & Techniques
• SAVETHESEINSTRUCTIONS
• KEEPTHISMANUALINASAFEPLACEFORFUTURE
REFERENCEANDMAKESUREANYONEWHOUSES
THISPRODUCTALSOREADSTHISMANUAL.
• READALLINSTRUCTIONSBEFOREUSINGYOUR
INSTYLERROTATINGIRON.NOASSEMBLYREQUIRED.

5For more tips, tricks and videos visit, www.instyler.co.uk
30 Second
RapidHeat-up HeatedRotatingBarrel
Straightens, Curls and Polishes Hair
RotatingBarrel
(32mm Shown)
Oers Volume,
Curls and Flips
195°CMaxHeat
Salon Quality Results
Swivel Cord
FirstRowofBristles
Separates and Aligns Hair
SecondRowofBristles
Adds Volume and Reduces Frizz
Curved Smoothing
Plate
Automatically Aligns
to Smooth Hair and
Reduce Frizz, Without
Crushing or Creasing.
Features InStyler Rotating Iron
HeatSettings:
LOW
1 Bar - 140°C
Ideal for thin or
medium textured hair.
HIGH
2 Bars - 195°C
Ideal for thick,
coarse hair
OFF
Automatic Safety Shut-O | Voltage: 220-240V, 50/60Hz
32mm Power: 65W | 19mm Power: 42W

6
InStyler®Rotating Iron
Safety First Using your Thermal Guard
NOTE: It is recommended that you use your InStyler with the in-
cluded Thermal Guard Training Aid, to help prevent burns while you
are getting used to this unique new hot styling tool.
Attaching Your Thermal Guard Training Aid
1. Before attaching the Thermal Guard make sure the barrel of the
unit is cool to touch.
2. To attach, snap the Thermal Guard Training Aid onto the side of
the unit directly under the ring below the barrel.
3. Rotate the Thermal Guard Training Aid until tabs are seated in the
indentations on the body of the InStyler, and the Thermal Guard
Training Aid is facing out.
4. Once it is snapped in place, you can use your InStyler as you nor-
mally would.
Removing Your Thermal Guard Training Aid
5. Before removing Thermal Guard make sure the barrel of the unit is
cool to touch.
6. To remove the Thermal Guard Training Aid, firmly grab the Ther-
mal Guard Training Aid, making sure the barrel of the unit is cool,
twist to unseat it and pull to remove.
NOTE: It is important to keep your InStyler clean, as hair product
build-up can accumulate on the barrel and bristles. With the unit
unplugged, wipe the outside surface only with a lightly damp cloth.
Bristles can be lightly scrubbed if necessary. Make sure the InStyler
is completely dry before plugging into any power source. Please see
page 15 of this manual for more detailed instructions on cleaning.
*Always allow the InStyler to cool before storing.
Attach around the neck of
the barrel side as shown.
Rotate 90 degrees until
snaps secure into place.

7For more tips, tricks and videos visit, www.instyler.co.uk
HairTypes
The way you use your InStyler depends on what type of hair you have.
You’ll get the most out of your InStyler if you use the techniques best
suited to your hair type.
Thethreemaintypesofhairare:
1. Fine - Set the InStyler at Low to Medium heat setting. With fine hair,
you should only need 1 to 2 passes with the InStyler to achieve your
desired results.
2. Medium or Normal - Set your InStyler to the Medium to High heat
setting. You should only need 1 to 2 passes with the InStyler to
achieve your desired results.
3. Thick or Coarse - Set your InStyler at the highest heat setting and
style as desired. With coarse hair, 2 to 3 passes with the InStyler
should be enough to set your style.
Don’t rush! Remember to
Take your time and move slowly through the hair.
NOTE: For colour treated hair, we also recommend a lightweight
shampoo and a light leave-in conditioner.
• Volumizing products can be used to hold the style.
• To hold your style, end with a professional light finishing spray.
• Although the InStyler uses less heat than other hair appliances,
we recommend using thermal protectant products before use.
TheBasicsPreparation for all hair types.
• Before using your InStyler, you should always start with clean, dry hair.
• You should also detangle first with a brush, and all sections should be
combed out for optimal results and shine.
• Sections of hair to be styled should be no wider than the length of the
InStyler barrel. We recommend starting with 1 to 3 inch sections at a
time for whichever style you want to achieve.
• Style the under layers of your hair first. After under layers are com-
pleted, style your top layers.
• You may use any salon quality styling product with your InStyler,
however we do not recommend the use of any oil-based products with
your InStyler.
• For better hold, you can use your favorite light styling spray on each
section of hair before using your InStyler.
• Go Slowly! The most important lesson is to glide the InStyler slowly.
Don’t worry if you see “steam” coming o of your hair when using your
InStyler. This is not the result of any damage to the hair, it is simply
excess moisture that is evaporating.

8
InStyler®Rotating Iron
SectioningHair
To achieve the style you want with your InStyler, it is important to
know how to properly section the hair.
• Withlongerhair,clipupthetoplayersofyourhair,andthen
begin sectioning and styling your under layers of hair first.
• Forbestresults,donotusengerstogathereachsectionof
hair. You can gather a much “cleaner” section with a sectioning
comb.
• Startwith3-7cmsectionsworkingaroundeachsideofthe
head to the nape of the neck. Use small sections of hair.
• Whenstylinghair,griptheInStylerrmlybutnottootightly.
Let hair glide through it. Let the InStyler do the work.
Straightening
1. Section your hair using a sectioning comb.
2. Position the InStyler so the rotating barrel
side is next to your scalp as illustrated in
the picture.
3. Gently close the InStyler on your section
of hair starting at the roots, and let the
InStyler slowly glide straight down
through the ends of your hair.
TIP: To straighten at the root, sim-
ply glide just the hot barrel over
the root area (see illustration). Do
not close the unit. Be cautious to
avoid burning your scalp.

9For more tips, tricks and videos visit, www.instyler.co.uk
3. Near the end of the hair section, ro-
tate your wrist so the InStyler brush
turns out away from your face. Allow
the barrel to rotate 3 to 5 seconds in
place on your ends before releasing
the hair. (see illustration)
Flick Out
1. Gently close the InStyler onto the sec-
tion of hair with the barrel positioned
over the section of hair.
2. Slowly glide the InStyler down through
the hair section from the roots to the
ends. (see illustration)
Curl Under
1. Gently close the InStyler onto the sec-
tion of hair with the barrel positioned
under the hair section.
2. Slowly glide the InStyler down through
the hair section from the roots to the
ends. (see illustration)
3. Near the end of the hair section, ro-
tate your wrist so the InStyler brush
turns in towards your face. Allow
the barrel to rotate 3 to 5 seconds in
place on your ends before releasing
the hair. (see illustration)

10
InStyler®Rotating Iron
Soft Curl (32mm Barrel) or
Spiral Curl (19mm Barrel)
1. For the curling technique, you may find it easier to remove the
Thermal Guard Training Aid while keeping in mind to be cau-
tious and avoid burning your face or scalp. (See page 6 for
Thermal Guard Training Aid removal instructions.)
2. Being careful to not burn your fingers, wrap a
section of hair around the barrel of your InStyler
from root to ends, with the barrel side facing
your scalp (see illustration).
3. Gently close the InStyler onto the section of hair.
Rotate your wrist slightly to ensure the ends
of your hair are included.
VolumeBoost
To give your hair a boost of even more
dramatic volume, you can try a tech-
niquecalled,“OnBaseStyling”
1. To begin, wrap a section of hair around
the barrel down to the root.
2. Place the InStyler barrel directly over the
root, close the unit and let the barrel ro-
tate for a few seconds. (see illustration)
3. Open the InStyler and let the hair fall
from the barrel. (see illustration) DO NOT
loosen newly styled sections with fingers
or comb until the hair is completely cool
to the touch. This technique can be used
anywhere you want an extra volume
boost.
4. Let the InStyler rotate for 5 to 10
seconds on each section of hair, then
gently open the unit letting the hair fall
from the barrel.
5. For tighter, more defined curls, you can
let your InStyler rotate for a few sec-
onds longer. Let hair cool completely
before running fingers through to
separate.

11 For more tips, tricks and videos visit, www.instyler.co.uk
Soft Curl (32mm Barrel) or
Spiral Curl (19mm Barrel)
InStylerTechniques-Advanced
TocreateextrabodyandvolumeusingtheInStyler:
• With the InStyler barrel facing towards the back of the head,
close the InStyler onto the section of hair, and slowly pull the
InStyler in the opposite direction that you want your hair to lay.
In other words, at the crown of your head, grab a section of hair
with the InStyler and slowly pull the unit forward towards your
forehead.
• To boost the volume on the sides and back of the head,
gather a section of hair and push the InStyler upwards towards
the crown of your head. Gently pull the InStyler through the
ends of the section of hair. This technique gives extra body in
the root area making hair look fuller. This technique can be used
anywhere you need extra body, volume or height.
• For additional height in your fringes,wrap the fringes with
the barrel towards your scalp and let the InStyler rotate for a
few seconds directly over the root. Open the unit and let your
fringes gently fall from the barrel.

12
InStyler®Rotating Iron
FrequentlyAskedQuestions
HowdoIusetheInStylerascomparedtomyatiron?
A. The technique is similar in that you put your hair into the
InStyler, you close it onto your hair, and then slowly move down
the length of your hair. That is where the similarities end! The
rotating, heated, polishing barrel and bristles will do most of the
work for you. Plus, you’ll find that you can do much, much more
with your InStyler than you could ever do with your flat iron.
MyhairiscomingoutfrizzywhenIusemyInStyler.What
amIdoingwrong?
A. Go Slowly. It helps to completely dry, comb and detangle your
hair as much as possible. Position the InStyler so that the barrel
rotates with the direction of your hair. Also, keep in mind to put
as little tension as possible on the barrel. This will help keep
frizz to a minimum.
DoestheInStylerworkonnaturalAfricanAmericanhair?
A. Absolutely. You will get best results if your hair is combed and
detangled first. The InStyler is a great tool for African American
Hair because it will not leave crease marks like flat irons, and
the polishing barrel and bristles will leave the hair looking shiny
and beautiful. The InStyler is safe for any type of hair when
used properly.
CanIusestylingproductsbeforeorafterIusemyInStyler?
A. You can use any salon quality product with your InStyler,
although we do not recommend using any oil-based products
on your hair beforehand. A professional thermal protectant
spray can be applied to the hair before you style, as well as any
professional firm-up or styling spray to help hold the style.
The InStyler doesn’t seem to be working on my ends. Am I
doingsomethingwrong?
A. If you’re having trouble styling the ends, try holding the InStyler
there a little bit longer. The ends of the hair are normally the
driest part of the hair, and can be a bit more dicult to style. It
helps to use a good conditioner, especially on the ends to help
infuse moisture. Also, if you have split ends, the hair may come
out looking frizzy.

13 For more tips, tricks and videos visit, www.instyler.co.uk
Iseesmokecomingfrommyhair!Isitburningmyhair?
A. No! The InStyler is not burning your hair. This is just a byprod-
uct of the evaporation of built-up conditioner or styling prod-
ucts on your hair and it is completely normal.
CanIusemyInStylerwithrealhumanhairextensions?
A. Yes. Make sure you start with your InStyler below where the ex-
tension is attached to your natural hair. Do not pull the InStyler
through with any pressure, as you may pull out your extensions
if not careful. NEVER use your InStyler with any synthetic hair
extensions.
ProductandTroubleshootingQuestions
WhatistheInStyler?
A. The InStyler is a new hair styling tool that straightens, pol-
ishes and styles hair by means of a rotating heated barrel and
brush bristles. This totally new design polishes the hair strands
individually, creating amazing results that are much better than
those they would have achieved using a flat iron, curling iron,
or hot tool. The new design delivers great results without an
extreme amount of heat or heavy styling products.
HowistheInStylerdierentthanmyatiron?
A. Simple: A flat iron compresses, mashes and then literally bakes
your hair between two extremely hot plates. The InStyler’s
rotating polishing barrel gives your hair the heat it needs to
help style and straighten. Since the barrel is constantly moving,
it won’t “press and bake” like a traditional flat iron. The InStyler
also features a heated, floating plate between the two rows of
brushes. The plate automatically adjusts, allowing the hair to
have more consistent contact with the barrel, without having
to grip the unit so tightly. The result is less frizz and smoother,
shinier hair with no creasing. The polishing barrel allows the
InStyler to actually use less heat than a flat iron delivering bet-
ter results including perfect flips, curls and loads of luscious
volume.

14
InStyler®Rotating Iron
14
Ineedalotofheattostraightenmyhair.WilltheInStyler
gethotenough?
A. We get asked this question a lot, and we’re very proud to say
you can add this one to the old “hair styling myths” column!
With the InStyler, you don’t need a lot of heat to straighten and
style your hair! The InStyler’s unique design actually allows you
to use less heat than you are used to, while still getting bet-
ter results than you would with a flat iron or other hot tool. It’s
a totally new way of thinking about heat and your hair – you
don’t need the extreme heat to get the results you want. If you
decide that you would like more heat, the InStyler has three
dierent temperature settings.
CanIusetheInStylertocurlhair?
A. Absolutely! Simply by wrapping your hair around the rotating
heated polishing barrel, and closing the InStyler, you can create
great curls!
The heated polishing barrel rotates. Can my hair get tan-
gled?
A. No. The surface of the rotating heated polishing barrel is totally
smooth, so your hair will not get tangled.
Whatisthediameteroftheheatedbarrel?
A. Your InStyler’s heated barrel diameter is 32mm or 19mm.
Whatarethebristlesmadeof?
A. The bristles are made of heat resistant nylon.
HowdoIturntheInStyleron?
`
A. Check to make sure your InStyler is plugged in. Press the Power
button. The LED bars should light and begin flashing. Once the
LED stops flashing the InStyler is ready to go. You must close
the handle to begin the rotation.
HowdoIgetmyInStylertorotate?
A. You must close the handle to start the rotation. The rotation will
start automatically.

15 For more tips, tricks and videos visit, www.instyler.co.uk 15
WhatisthepoweroftheInStyler?
A. 220-240V, 50/60Hz and 65 Watts (32mm Barrel) or
42 Watts (19mm Barrel).
WhatifmyInStylerdoesnotheat?
A. Check to make sure your InStyler is plugged in. Press the
Power button. The LED bars should light and start flashing.
When the LED stops flashing the InStyler will be at the set
temperature and ready to use.
WhenIusemyInStyler,whydoesthetemperatureLED
starttoash?
A. It is normal for the heat to fluctuate during use. As long as the
InStyler has been allowed to reach full heat (steady LED) after
powering on, you can continue to use your InStyler while it is
flashing.
HowdoIcleanmyInStyler?
A. When cleaning your InStyler, disconnect it from the power
source and make sure it has completely cooled. Wipe the
outside surface only with a soft damp cloth. Be sure to wring
out all excess water before applying it to the InStyler. Clean
more severe dirt by using a soft, damp cloth with a mild soap.
Bristles can be lightly scrubbed if necessary with a damp
cloth to remove any built up product and any residual hair left
in the bristles should be removed. The barrel can be wiped
down with a soft, damp cloth. Use a mild soap if necessary.
Make sure the InStyler is completely dry before plugging into
any power source.

16
InStyler®Rotating Iron
Your Guarantee
This product is under guarantee for 12 months. We do not
oer returns but do respect your Statutory rights.
LIMITEDONEYEARWARRANTY
The InStyler and its parts are warranted against manufac-
turer defects for one year from the date of purchase. This
limited warranty only covers the items specifically listed
above for the period specified. IF THE WARRANTY CARD IS
NOT COMPLETED AND RETURNED TO COMPANY AT THE
TIME OF THE ORIGINAL SALE, CONSUMER MUST PROVIDE
PROOF OF PURCHASE WITH ANY WARRANTY CLAIM.
EXCLUSIONS
Excluded from this limited warranty are damages to the
InStyler caused by unreasonable or unintended use, abuse
or neglect. Also excluded is damage from ordinary wear and
tear.
VOIDINGOFLIMITEDWARRANTY:
THE FOLLOWING OCCURRENCES OR CONDITIONS WILL
VOID THIS LIMITED WARRANTY: (1) USE FOR COMMERCIAL
PURPOSES; (2) FAILURE TO USE THE INSTYLER ACCORD-
ING TO COMPANY’S SPECIFICATIONS AND INSTRUCTIONS
INCLUDING, WITHOUT LIMITATION, SAFETY INSTRUCTIONS
AND WARNINGS; (3) FAILURE TO PROPERLY CLEAN AND
MAINTAIN THE INSTYLER AS STATED IN THE MANUAL;
AND (4) TRANSFER OR ASSIGNMENT OF THIS WARRANTY.

17 For more tips, tricks and videos visit, www.instyler.co.uk
SOLE REMEDY
The sole remedy under this limited warranty is repair or
replacement, the Company’s option, of the InStyler or part(s)
deemed to be defective. “Repair” or “Replacement” shall
mean providing the labour and materials necessary, at no
cost to the consumer, to repair or replace the defective parts
or replace, at Company’s option, the InStyler.
HOWTOMAKEAWARRANTYCLAIM:
To present a claim under this limited warranty, call the tele-
phone number below to receive a return authorisation code.
Customer Services: 03301239101
DISCLAIMER:
The Warranty in this document is the only Warranty on the
InStyler. Company makes no other Warranty of any kind.,
express or implied. All implied Warranties of merchantability
and fitness for a particular purpose which exceed the obliga-
tion or time limits stated in this Warranty are hereby dis-
claimed by Novellia UK Ltd and excluded from this Warranty.
Distributed by:
Novellia UK Ltd
26 Park Road
Melton Mowbray
Leicestershire
LE13 1TT
www.instyler.co.uk

18
InStyler®Rotating Iron
Returns Policy
Novellia UK Ltd values its relationship with its customers,
and therefore, oers a return policy for any faulty products
purchased directly from Novellia UK Ltd.
To return any faulty products, you must contact Novellia
UK Ltd and receive a Credit Return Authorisation Number
within the warranty period. You must receive a Credit Return
Authorisation Number in order to return the product. Call
03301239101 to receive your Credit Return Authorisation
Number.
YOU MUST:
• Provide full contact details.
• Provide a reason for returning the product.
• Post the product and all accompanying components to
NovelliaUKLtd,c/oPOBOX724,ALTRINCHAM,WA15
5BJ.
• Return the product in the original packaging with all
ot her items included in the purchase and the original
purchase receipt.
• Mark the outside of your return shipping box with your
Credit Return Authorisation Number and your first and
last name in clearly printed letters.
• This returns policy doesn’t aect your statutory rights.
Details that will be required for any faulty InStylers:
• Name
• Address
• Telephone Number
• Email
• Place of Purchase
• Price Paid
• Serial Number
• Model Number
• Reason for Return

19 For more tips, tricks and videos visit, www.instyler.co.uk
Other Important Information
PackagingandEnvironmentalWarnings/RecyclingInformation
After removing the product from the packaging ensure that all
contents are intact and free from damage. In the unlikely event of
missing or damaged parts; please contact your retailer or Novellia
UK Ltd, directly.
NEVER LEAVE CHILDREN UNATTENDED WITH PACKAGING TO
AVOID A POTENTIAL SOURCE OF DANGER.
Please dispose of all packaging responsibly in accordance with your
Local Authority regulations. Recycle the packaging material where
possible.
Your appliance contains valuable materials which can be recovered
or recycled. If you decide to replace your product please recycle
where facilities exist. Check with your Local Authority or retailer for
your local civic waste collection facility.
Unwanted electrical products should not be disposed of with house-
hold waste.
Power Cord and Plug Warning (UK AND Ireland) The sealed power
cord supplied with this product is fitted with an earthed 13A plug
(BS1363) and is intended for domestic use only in the country of
purchase.
The sealed power supply cord and plug is not user-serviceable.
Replace fuse only with an approved 13A fuse (BS1362).
ALWAYS ENSURE FUSE COVER IS SECURELY IN PLACE BEFORE
OPERATION.
DO NOT attempt to operate the product with any other power cord
other than the one provided or if the power cord or plug is damaged
in any way. To order a replacement contact Novellia UK Ltd, using
the contact details supplied in this manual.
DO NOT use this product with an extension lead. If you accept li-
ability for doing so, only use a good quality extension lead with an
earthed plug that is suited to the power of the appliance.
FAILURE TO COMPLY TO THE ABOVE WARNINGS COULD LEAD TO
SERIOUS DAMAGE TO THE PRODUCT AND/OR PERSONAL INJURY
AND MAY INVALIDATE YOUR GUARANTEE.

Distributed by Novellia UK Ltd.
POBox724,Altrincham,WA155BJ
Customer Service: 0330 1239101
©2014 Tré Milano, LLC. All Rights Reserved.
InStyler® and InStyler® logo are registered trademarks of Tré Milano, LLC.
Illustrations by Renee Reeser Zelnick
FeaturesandBenefitsfor
InStyler Models
Join our community for updated tips, tricks,
videos,andspecialproductoers.
www.instyler.co.uk
InStyler 32mm Rotating Iron InStyler 19mm Rotating Iron
Straightens with body Straightens with body
Creates perfect soft curls Great for straightening close to the root
Works with all hair types Works with all hair types
Works on all hair lengths, works
especially well with medium to long
hair styles
Works with all hair lengths, works espe-
cically well with short hair styles
Creates softer flick out and curl under
styles
Creates perfect spiral curls and tighter
flicks
Great for volume boost at the crown Great for volume boost and detail work
Self-adjusting floating heated plate for
smoother, shiner hair
Self-adjusting floating heated plate for
smoother, shiner hair