Intellinet NSC15-WG User manual

NSC15-WG
NetWork
Camera
uSer
maNual
MODEL
550901
INT-550901-UM-0709-01

2
TABLE OF CONTENTS
table of CoNteNtS
INTRODUCTION...................................................................................................3
HARDWARE..........................................................................................................4
Camera ............................................................................................................4
Mounting Bracket/Stand...................................................................................4
Cables..............................................................................................................4
INSTALLATION/SETUP.........................................................................................5
Software...........................................................................................................5
OPERATION..........................................................................................................5
Using the Camera with a Windows Web Browser............................................5
Using the Camera with a Mac Web Browser.................................................... 6
 WirelessConguration .....................................................................................6
Using the Camera with an iPhone....................................................................7
Using the Camera with a Mobile/Cell Phone.................................................... 8
Using the Camera with MSN Messenger.........................................................9
Main Menu ..................................................................................................... 12
Setting / Basic................................................................................................ 14
System ........................................................................................................ 14
Camera ........................................................................................................17
Network....................................................................................................... 21
Security .......................................................................................................28
Setting / Advanced.........................................................................................30
FTP Client...................................................................................................30
SMTP .......................................................................................................... 32
HTTP Event.................................................................................................36
Schedule..................................................................................................... 37
Motion Detection .........................................................................................38
System Log .................................................................................................39
FRAME RATE & BIT RATE TABLES................................................................... 40
STORAGE REQUIREMENT TABLES.................................................................44
SPECIFICATIONS ................................................................................................51
section page

3
INTRODUCTION
iNtroduCtioN
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™
NSC15-WG Network Camera, Model 524421.
Offering the latest technology and many of today’s most popular features,
this camera presents the versatility and reliability that makes it an ideal
choice for a wide variety of applications.
These easy-to-follow instructions make setup and operation quick and
simple,soyou’llalsosoonbeenjoyingthebenetsofthesefeatures:
• Excellentimagequalitywith30fpsfull-motionvideoinallresolutions
• Progressive-scanimagesensorwithOmniPixel2technology
• Audiosupport,fullduplex,upto8kHz,withintegratedmicrophone
• Easy-to-use16-channelcameraviewingandrecordingutilityincluded
• Integratedmulti-windowmotiondetection
• Selectablevideobufferforsmoothervideostreaming
• SupportssimultaneousMPEG4andMotion-JPEGimagecompression
• Mobilephonestreaminglivevideothrough3GPP/ISMA/RTSP
• Mobilephoneliveimagethrough2.5WAP
• MPEG4+Motion-JPEG+3GPPmobilephonestreaming,audioand
 10xdigitalzoom
• SupportsHTTPSencryptionforenhancedsecurity
• SupportsUPnPwithUPnPportforwardingcapability
• Ultra-compactandeasytoinstall
• LifetimeWarranty
NOTE:Somescreenimagesaremodiedtottheformatofthismanual.
PACKAGE CONTENTS
• NSC15-WGNetworkCamera
• Cameramountingbracket
• Quickinstallationguide
• Externalpoweradapter
• SoftwareCDwithusermanual

4
HARDWARE
DC 5V SPK R
RESET LAN
Locking Bolt
Bracket
Connector
hardWare
Camera
Focus Adjustment Ring — For manually
setting the best image quality.
Wireless Antenna — Connects
the camera to the Network.
Night-Vision LEDs — These
light when the camera’s
environment is too dark.
Network LED — Lights once the camera is connected with a network.
Power LED — Lights after the camera completes the booting process.
Built-in Microphone — For two-way audio.
DC 5V — This is the power jack for the included power adapter.
Reset — This recessed button can be 1) pressed (with a common pin
or similar pointed object) and released to reboot the camera when
it’s powered on; or 2) pressed and held in for 10 seconds to revert to
factory default settings.
Speaker — This is the Audio Out jack for earphones or speakers.
LAN—ThisRJ45portconnectstoyournetwork.
Mounting Bracket / Stand
For positioning the camera on a vertical surface (such as a wall or post)
orhorizontalsurface(suchasaceilingoroverheadbeam):
1.Attachthebaseofthemountingbrackettotheatsurfaceusingthe
three included screws.
2. Screw the bracket connector
into the back of the camera.
3. Loosen the locking bolt
enough to position the camera
as desired; tighten the locking
bolt to secure the camera in place.
Connections
1.UseastandardRJ45networkcabletomakeyourcamera-to-LAN
connection.
2. Connect the included power adapter to the camera.
Power LED
Network LED
Wireless AntennaFocus Adjustment Ring
6 Night-Vision LEDs
Built-in
Microphone

5
INSTALLATION/SETUP/ OPERATION
iNStallatioN/Setup
System Requirements
For normal operation and viewing of the NSC15-WG Network Camera,
it’srecommendedthatyoursystemmeettheseminimumrequirements:
• Pentium41600MHz(orequivalentAMD)CPU
• 64MBRAMgraphiccards(orequivalenton-boardgraphiccards)
• 512MBRAM
• Windows2000orlater;MacOSX(Leopard)
• InternetExplorer6orlaterWebbrowser(seeSpecicationsformore)
Software
1. With your computer on, insert the included software CD in the CD-
ROM drive. The setup screen will display automatically.
2. From the IP Camera Installation menu, select “Intelligent IP Installer”
and follow the subsequent on-screen instructions.
NOTE:Install“Xvidcodec”wheninstalling“IntelligentIPInstaller”ifyou
can’tviewtherecordedvideole(duetoamissingvideodecoder).With
Windows 2000 Server, if the codec doesn’t work properly, download
Xvidcodec1.0fromtheInternet.
operatioN
Using the Camera with a Windows Web Browser
1. Open your Web browser, then enter the IP address or host name of the
 NSC15-WGNetworkCamerainthelocation/addresseld.NOTE: If
you only want to view the video without accessing the Setting screen,
enter “http://<IP>/index2.htm” as your Web URL.
2. Enter the default name and password
(“admin” for both). These are set at
the factory for administrators and can
be changed in the Account section
 (Setting→Basic→Security→
Account). Click “OK,” and the monitor
image will display in your browser along with the Setting, Client Setting
and Image Setup menu options (see Main Menu section in this manual).

6
OPERATION
Using the Camera with a Mac Web Browser
1. Click the Safari (browser) icon on
your desktop and enter the IP
address of the IP camera in the
 Location/Addresseldofyourbrowser.NOTE: If you only want to
view the video without accessing the Setting screen, enter
“http://<IP>/index2.htm” as your Web URL.
2. Enter the default name/password
(both “admin”). These are set at the
factory for administrators and can
be changed in the Account section
 (Setting→Basic→Security→
Account). Click “Log in,” and the
monitor image will display in your
browser along with the Setting, Client Setting and Image Setup menu
options (see Main Menu section in this manual).
Wireless Conguration
The wireless network for the NSC15-WG Network Camera needs to be
set up using a cable network connection. Once the camera is set up,
the wireless function can work without the cable network connection.

7
OPERATION
1. Make your network connection. (See the Hardware section.)
2.GotoSetting→Basic→Network→Wireless,andselect“On”to
display the Wireless / Setting screen.
3. Click “Refresh” and all access points (APs) around you will display.
4. Select the AP you want to connect to.
5.EnteryourpasswordintheActiveTransmitKeyelds,ifneeded.Ifyou
don’t know the setting of the wireless AP, ask your network administrator.
6. Select both “Obtain an IP address automatically (DHCP)” and “Obtain
DNS server address automatically.” NOTE:IfusingaxedIPaddress, 
you can select “Use the following IP address” and “Use the following
 DNSserveraddress”andllintheorrespondingtexteldsaccordingly.
7. Once you’ve connected to the camera with the wireless IP address,
you can remove the cable.
Using the Camera with an iPhone
1. Select the Safari function (right).
2. Enter the IP address in your Web link (below
left image).
3. Enter a name and password (below center
image; defaults are both “admin”). Press
“Log In.”
4. The menu and live image display in the
middle of the screen (below right image).
NOTE: The iPhone will present continuous
snapshots, not real-time video streaming. The
recording feature, therefore, is disabled.

8
OPERATION
Using the Camera with a Mobile/Cell Phone
To use the NSC15-WG Network Camera through a mobile/cell phone,
make sure the Real Time Streaming Protocol (RTSP) is set to “On” (which
isthedefaultsetting:Setting→Basic→Camera→General).
3G MOBILE PHONE VIEWING/STREAMING
For 3G mobile phone viewing, enter “rtsp://<IP>:<PORT>/video.3gp” in
your3GStreamingLink,where<IP>isthepublicIPaddressofyour
cameraand<PORT>istheRTSPportofyourcamera.Thedefault
valuefortheportis554.Example:r t sp: //10 0 .10.10.1:8 5 5 4/ v id eo. 3g p.
NOTE: You can also use RTSP clients (RealPlayer, VLC, Quicktime,
etc.) to view RTSP streaming by entering “rtsp://<IP>:<PORT>/video.3gp”
as the player’s URL.
2.5G MOBILE PHONE WAP VIEWING
For 2.5G mobile phone viewing, enter “<IP>/mobile.wml” in your 2.5G
Webbrowser,where<IP>isthepublicIPaddressofyourcamera.
2.5G MOBILE PHONE BROWSER VIEWING
For 2.5G mobile phone viewing, enter “<IP>/mobile.htm” in your 2.5G
Webbrowser,where<IP>isthepublicIPaddressofyourcamera.

9
OPERATION
Using the Camera with MSN Messenger
You can download free MSN software and create a new MSN account
(“cameraathome”istheexampleusedinthismanual)touseMicrosoft
Live Messenger.
1.GotoSetting→Basic→Network→Messengerandrefertothe 
options below.
Messenger—Select“On”andllintheLoginAccount(Cameraathome)
 andbothPasswordelds.
IP Notication—Select“On”tohavethecamerasendIPnoticationsto
users with permission.
Privacy — Select “On” to create an allow list. Enter a username and click
“Add” for each address you want to allow access to.
2. Use your account to log in to the Messenger software. Then, add the
new MSN account (camera at home)

10
OPERATION
3. Camera at home will display with its public IP and private IP if the IP
 Noticationoptionisselected.
4. Click the camera icon and select “View a new contact’s webcam.”
5. The camera will “accept your invitation” and display the live video in
the right screen after few seconds.
Camera at home says:
http://220.133.2.196/<bucs[email protected]>

11
OPERATION
6. Open the Actions menu and select “Start Control Panel.”
Main Menu
7. A message displays stating “This application is not part of Windows
Live Messenger....” Select “Don’t show me this again” and click “OK.”

12
OPERATION
8.WhentheControlPanelscreendisplays,youhaveseveraloptions:
 •Clickthecamera/snapshot icon to instantly send the image being
viewed.
 •Clickthepaint/palleteicontodisplaythetoolbarforsettingupan
  image:Brightness,Contrast,SaturationandHue.
 •Afteradjustmentshavebeenmade,youcanstillclick“Default”to
return to the previous settings.
Main Menu
Themaincongurationscreendisplaystheinitialmenuoptionsforallthe
camerasettings:Setting,ClientSettingandImageSetupontheleft;Live
View options attached to the image on the right.
SETTING
If acting as the administrator, click to access the Basic and Advanced
settingsmenus(eachexplainedindetailinseparatesectionsbelow).
CLIENT SETTING
Click to access settings for the client(s).
Mode — From the pull-down menu, choose between MPEG4 and
http://220.133.2.196/<[e-mail]>

13
OPERATION
 MJPEGvideocompressionmodes.
NOTE:MJPEGstreamingisunavailable
if RTSP mode is activated.
View Size — Select the desired display
 imageresolution:640x480or320x240.
Protocol—Selectthetransferprotocol:
TCP, UDP, HTTP or Multicast.
Video Buffer — This makes the streaming
smoother in unsteady network
environments, but might cause a slight
delay in live viewing.
IMAGE SETUP
Usetheslide-barstoadjustthelevels:lower
to the left, high to the right.
Brightness — The higher the value, the
brighter the image.
Contrast — This is the ratio of white to
 blackproducedbythesystem.Thehigherthevalue,themoredened
the image.
Saturation — This is determined by a combination of light intensity and
how much it’s distributed across the spectrum of different wavelengths.
The higher the value, the more colorful the image.
Hue — This is one of the three main attributes of perceived color,
affected by different wavelengths of color. The higher the value, the
more vivid the image.
Click “Default” to return to previous settings.
LIVE VIEW
The buttons and bars at the top and bottom of the image control the
following options.
Snapshot—Tocaptureastillimageandsaveitinyourcomputer:
1. Click the camera icon (0) and a snapshot window will appear.
2. Click “Save” to save the picture in your computer.
3. Click “Close” to return to the view page.
Zoom—Todisplaythedigitalzoom,clickthezoombutton(1).Toadjust
 thezoomrange,movetheslide-barcontrol(2).Topositionthered
view frame (3), left-click and drag your mouse.

14
OPERATION
Audio buttons — Click on the speaker button (4) to turn the speakers
on/off. Click on the microphone button (5) to turn the microphone
on/off. The volume control bar (6) indicates the loudness level.
NOTE: When the speaker button is clicked “on,” the speakers on
your computer are turned on to transmit sound from the connected
camera(s). Likewise, when the microphone button is clicked “on,” it
means you can broadcast to the connected camera(s) via the
Ethernet using your microphone.
Video buttons — Click to pause the current video (7); to stop/play (8);
or to record (9).
Setting / Basic
From the Main menu, go to Setting, then Basic to access the System,
Camera, Network and Security submenus.
SYSTEM
GotothismenutodisplayandconguresettingsontheInformation,
Date/TimeandInitializescreens.
Information
TheInformationscreen(below)displaysbasicproductinfo:product
name,rmwareversionandWebversion.
1 7 58 4623
9
0

15
OPERATION
Date/Time
Current date/time — The current date and time of the device is displayed.
PC clock — This displays the date and time of the monitoring PC clock.
Date & time format — In the pull-down menu, select a time display
 format:yyyy-mm-ddhh:mm:ss(year-month-day/hour:minute:second),
 mm-dd-yyyyhh:mm:ss(month-day-year/hour:minute:second)or
 dd-mm-yyyyhh:mm:ss(day-month-year/hour:minute:second).
Adjust—Selectoneoffourtimeadjustingmodes:
 •Keepcurrentsetting:Keepsthecurrentdateandtimeofthedevice.
 •SynchronizewithPC:Makesthedate/timeofthedevicethesame
as that of the monitoring PC.
 •Manualsetting:Selecttomanuallyadjustthedevicedateandtime.

16
OPERATION
 •SynchronizewithNTP:SpecifytheNTPservernameandthe
  RefreshIntervaltosynchronizethedateandtimeofthedevicewith
those of the time server, known as the NTP (Network Time Protocol)
server. Note: The NTP server is an Internet standard protocol
  server(builtontopofTCP/IP)thatensuresaccuratesynchronization
to the millisecond of computer clock times in a network of computers.
NTP server name — Enter the host name or IP address of the NTP
server (up to 64 characters).
Time zone—Fromthepull-downmenu,selectthetimezoneandtime
difference from Greenwich Mean Time (GMT) where the device is
installed.
Initialize
Reboot—Clicktorebootthedevice.Whentheconrmationdisplays,
click “OK” to proceed. It takes about two minutes to reboot the device.
Factory default — Click to reset the camera to the factory default settings.
 Whentheconrmationdisplays,click“OK”toproceed.TheNetwork
LED will blink, and, after completing adjustments to the default
settings, the camera will reboot automatically. Do not turn off the
camera until the reboot is complete.
Backup setting data—Tosavethesettingdataofthedevicetoale,
click “Save” and follow the instructions on the browser to direct the
 letoyourspeciedlocation.
Restore setting — To load the saved setting data of the camera, click
 “Browse”andselectthelethedataisstoredin.Click“OK”;the
camera is adjusted according to the loaded data and is then restarted.

17
OPERATION
Firmware update — To upgrade the device software, click “Browse” and
 selecttheleforupgrading.Whentheconrmationdisplays,click
“OK” to start upgrading. The device will reboot upon completion.
NOTE:Useonlyupgradelesthataremeantspecicallyforthis
device; otherwise, problems may occur. Also, do not turn off the
device or disconnect the network until the upgrade is completed.
Upload language pack—Click“Browse”andselecttheleforupgrading.
 Whentheconrmationboxdisplays,click“OK”tostartupgrading.
The upgrade is applied immediately. The default language is English.
CAMERA
General
RTSP — Switch the RTSP streaming on/off. NOTE: RTSP (Real Time
Streaming Protocol) is supported by most the media clients (Real
Player, Media Player, QuickTime, etc.).
Image Rotate—Enablesyoutomirrororipthedisplayscreen.
Night Mode — Switch the mode on (“Auto”) or off.
Lighting—Choosethelightingenvironment:“50Hz,”“60Hz”or“Outdoor.”
White Balance—Selectfromthedrop-downmenu:“Auto,”“Fluorescent,”
“Incandescent” or “Black & White.”
Overlay—Select“TextOverlay”souserscanseesomeinformationon
 thedisplayscreen,suchasDate/Timeanduser-denedtext;select
“Privacy Mask” so users can conceal an area of the video image.
 •Textcolor:Selectyourpreferencefromthepull-downmenu.
 •Backgroundcolor:Selectyourpreferencefromthepull-downmenu.

18
OPERATION
 •Alias:Enteranameforthecamerainthiseld.
 •Date/Time:Turnthisdisplayonorofftosuityourpreference.
 •Displayposition:Selectwhereyouwantthedate/timetoappear.
MPEG4 / Computer View
RTSP — This set of options (shown above) is available if RTSP mode
is enabled (on the Camera / General screen).
 •RTSPport:SpecifythetransmissionportnumberofRTSPstreaming
video. The default value is 554.
 •Viewerauthentication:Whenenabled(“On”),usersviewingthrough
RTSP will be prompted to enter a username and password.
RTP — This set of options is available if RTSP mode is enabled (on the
Camera / General screen).
 •Unicaststreaming:SpecifythetransmissionportrangeofRTP
streaming video. RTP will select a port randomly from the range.
 •Multicaststreaming:Specifythemulticastserveraddressandthe
transmission port numbers of the audio and the video data (even
numbers from 1024 to 65534).
 •Time-To-Live:SetthemaximumTTLthatmulticastcanpassthrough.
MPEG4 viewer port — This set of options is available if RTSP mode is
disabled (on the Camera / General screen).

19
OPERATION
 •Unicaststreaming/Video/AudioPortNumber:Specifythe
transmission port number (any even number from 1024 to 65534)
of the video data, which is initially set to 8090. If you change the
setting of Video/Audio Port Number, the setting of Video/Audio Port
Number (SSL) will change automatically.
Image Size — Using the drop-down menu options, specify the image
 sizethenetworkcameratransmits:640x480,320x240or160x120.
Frame rate — Using the drop-down menu, set the frame rate of the
 MPEG4image:5,10,15,20,25or30fps(framessentpersecond).
Quality—Youhavethreeoptionsfordeterminingtheimagequality:
 •Auto:Thequalityandbitratewillbeautomaticallydecidedaccording
to the frame rate.
 •FixedQuality:Thedrop-downmenuoffers“Medium,”“Standard,”
  “Good,”“Detailed(Delicate)”and“Excellent.”
 •FixedBitrate:SetthebitrateofMPEG4imagetransmissionforaline:
64, 128, 256, 384, 512, 768, 1024, 1280, 1536 or 2048 kbps.
NOTE: The selected frame rate and bit rate are tentative values. The
actual frame rate and bit rate may be different depending on the image
size,theshootingsceneorthenetworkconditions.
MPEG4 / Mobile View
RTSP — This set of options (shown above) is available if RTSP mode

20
OPERATION
is enabled (on the Camera / General screen).
RTP — This set of options is available if RTSP mode is enabled (on the
Camera / General screen).
 •Unicaststreaming:SpecifythetransmissionportrangeofRTP
streaming video. RTP will select a port randomly from the range.
 •Multicaststreaming:Specifythemulticastserveraddressandthe
transmission port numbers of the audio and the video data. They’re
initially set to 10000 and 11000. Specify an even number from 1024
to 65534.
 •Time-To-Live:SetthemaximumTTLthatmulticastcanpassthrough.
Image Size—ForMobileView,thesizeisxedat160x120.
Frame rate — Using the drop-down menu, set the frame rate of the
 MPEG4image:5,10,15or20fps(framessentpersecond).
Quality—Youhavethreeoptionsfordeterminingtheimagequality:
 •Auto:Thequalityandbitratewillbeautomaticallydecidedaccording
to the frame rate.
 •FixedQuality:Thedrop-downmenuoffers“Medium,”“Standard,”
  “Good,”“Detailed”and“Excellent.”
 •FixedBitrate:SetthebitrateofMPEG4imagetransmissionforaline:
16, 32 or 64 kbps.
MJPEG
MJPEG viewer port — These options (shown above and similarly for