Intellinet 524735 User manual

Wireless 300N PoE Access Point
300 Mbps, MIMO, PoE Support, Bridge, Repeater, Multiple SSIDs and VLANs
Part No.: 524735
Wireless networking with three times the speed and five times the flexibility.
The INTELLINET NETWORK SOLUTIONS Wireless 300N Access Point is the latest in wireless
networking. Taking advantage of new technology, a wireless network can now see greatly
enhanced network speeds.
Multiple Solutions in One Device
The INTELLINET NETWORK SOLUTIONS Wireless 300N Access Point serves multiple purposes — an access point for your wireless
network supporting multiple SSIDs and tagged VLANs, a wireless bridge for point-to-point connections or WDS setups, and a RADIUS
authentication server — and brings it all together so that the devices can access a high-speed Internet connection.
Flexibility
This access point can be configured in any one of five modes: 1) Access Point (AP), 2) Point-to-Point (PtP), 3) Point-to-Multi-Point
(PtMP), 4) Universal Repeater or 5) AP Client (Station Infrastructure). Add support for multiple ESSIDs and VLANs to that and it
becomes clear that whatever your requirements are the 300N Access Point provides the solution.
Secure Communications
The Wireless 300N Access Point provides maximum wireless security by supporting 802.1x user authentication for external RADIUS
servers and, thanks to its internal RADIUS server, the access point can be used as the authentication server in smaller networks. Other
security features included in this access point are MAC address filtering, disable SSID broadcast and support for the latest wireless
encryption mechanisms.
Power over Ethernet Port
The Wireless 300N PoE Access Point comes with a PoE PD port. This port can be used to power the device from a PoE-compliant LAN
switch, which is very convenient in situations where AC power is not readily available.

Wireless 300N PoE Access Point
300 Mbps, MIMO, PoE Support, Bridge, Repeater, Multiple SSIDs and VLANs
Part No.: 524735
Features:
Up to 300 Mbps network link speed
Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE 802.11g/b
standards
2T2R MIMO technology for enhanced throughput and coverage
Supports WMM function to meet the multimedia data bandwidth requirement
Supports Wi-Fi Protected Setup (WPS)
Supports WEP and WPA/WPA2 (TKIP and AES) data encryption
IEEE 802.3af-compliant PoE-powered device with one PoE (PD) port
Integrated RADIUS authentication server for 16 wireless clients
DHCP server assigns IP addresses for all LAN users
Supported modes: Access Point, Bridge Point-to-Point, Bridge Point-to-Multi-Point, WDS and Universal
Repeater
Supports multiple ESSIDs with individual security settings
Multiple ESSIDs support VLAN tagging
Easy installation through Web-based user interface
Firmware upgradeable
Use INTELLINET NETWORK SOLUTIONS Wireless N adapters for the best compatibility and
performance
Three-Year Warranty
Specifications:
Standards
» IEEE 802.1d (Spanning Tree Protocol)
» IEEE 802.11b (11 Mbps Wireless LAN)
» IEEE 802.11g (54 Mbps Wireless LAN)
» IEEE 802.11n (300 Mbps Wireless LAN)
» IEEE 802.1x (Network Access Control)
» IEEE 802.3 (10Base-T Ethernet)
» IEEE 802.3af (Power over Ethernet)
» IEEE 802.3u (100Base-TX Fast Ethernet)
General
» LAN port: 1 RJ45 10/100 Mbps data and power input port (PD port)
» LAN ports with Auto MDI/MDI-X
» Flash: 4 MB
» Memory: 16 MB SDRAM
» Certifications: FCC Class B, CE Mark, RoHS
Wireless
» Chipset: Ralink RT3052
» Wireless frequency range: 2.400 – 2.483 GHz
» Modulation technologies:
- 802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
- 802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
- 802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
» Data rates:
- IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)
- IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)
- IEEE 802.11n (MCS0-15: up to 300 Mbps)
» Output power:
- OFDM: 14 dBm +/- 1.5 dBm (300 Mbps, 40 mW max.)
- OFDM: 15 dBm +/- 1.5 dBm (54 Mbps, 40 mW max.)
- CCK: 17 dBm +/- 1 dBm (11 Mbps, 63 mW max.)
» Receiver sensitivity:
- 11n (300 Mbps) MCS0-15: 20 MHz: -73 dBm; 40MHz: -68 dBm
- 11g (54 Mbps) OFDM: -78 dBm
- 11b (11 Mbps) CCK: -91 dBm
» Wireless operation modes:
- Access Point
- Station Infrastructure (AP Client)

- Point-to-Point Bridge
- Point-to-Multi-Point Bridge
- WDS Bridge
- Universal Repeater
» Wireless security:
- WEP encryption (64/128 bit)
- WPA TKIP
- WPA2 AES
- WPA2 mixed
- WPA RADIUS
- 802.1x Authentication
- Internal MD5/PEAP RADIUS server
- Client access control through media access control (MAC) filter
» Antennas:
- 2 detachable dipole antennas with 3 dBi gain each
- 2T2R MIMO mode (2 transmitters, 2 receivers)
LEDs
» Power
» WLAN Link/Act
» LAN Link/Act
Environmental
» Dimensions: 160 (W) x 127 (L) x 35 (H) mm (6.3 x 5.0 x 1.4 in.)
» Weight: 0.8 kg (1.7 lbs.)
» Operating temperature: 0 – 40°C (32 – 104°F)
» Operating humidity: 10 – 90% RH, non-condensing
» Storage temperature: -20 – 60°C (4 – 149°F)
Power
» External power adapter: 5 V DC, 1.0 A
» Power consumption: 4 Watts max.
» Via PoE PD port: 48 V, 0.2 A
Package Contents
» Wireless 300N PoE Access Point
» User Manual
» 2 detachable antennas
» Power adapter
» Ethernet Cat5 RJ45 cable: 1.0 m (3 ft.)