Inter-m PAM-MPM4 User manual

PAM-MPM4 CD MP3 Tuner Module
* 본 제품을 사용하기 전에 반드시 방송방식 및 전원 전압을 확인하여 사용하시기 바랍니다.
Operation
Manual

R SK OF ELECTR C SHOCK
DO NOT OPEN
CAUTION
CAUT ON: TO REDUCE THE R SK OF ELECTR C SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERV CEABLE PARTS NS DE.
REFER SERV C NG TO QUAL F ED SERV CE PERSONNEL.
WA NING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions
in the literature accompanying the appliance.
Caution: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not any
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette fiche
polarisée avec un prolongateur, une prise de courant on une
autre sortie de courant, sauf si les lames peuvent étre
insérées à fond sans en laisser aucune partie à découvert.
Warning*Do not install this equipment in a confined space such as a book case or
similar unit.
*The apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such vases, shall be placed on the apparatus.
*Worded: “WARN NG FOR YOUR PROTECT ON PLEASE READ THE
FOLLOW NG-WATER AND MO STURE: Unit should not be used near
water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc). Care should be taken so than
objects do not fall and liquids are not spilled into the enclosure through
openings.”
NOTE : This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
* It can be heated up if ou use this product in closed box or ill-ventilated place.

ContentsWelcome..............................................................................4
Unpacking............................................................................4
nstallation
Environment.........................................................................5
mportant Safety nstructions ...............................................5
Additional Explanation.........................................................7
Method to treat Compact Disc (CD)....................................8
Characteristics.....................................................................9
Part Names and Function .......................................................10
Operation Method .............................................................13
Method to Use FM Tuner ..................................................13
Method to Use CD.............................................................14
Method to Use Long-Life...................................................19
Method to Use DRP/ USB.................................................20
Applications .......................................................................26
Block Diagram...................................................................27
Specification and Performance .........................................28
Service
Procedures.........................................................................29
Schematic ..........................................................................29
Parts List............................................................................29
Warranty ...............................................................................29

4
PAM-MPM4 (CD MP3 TUNER Module)
Unpacking
Please take a few minutes to read this manual to
familiarize yourself with important information
regarding installation, product features, and operation.
As with most electronic devices, OR G NAL
PACKAG NG (OR EQUAL) S REQU RED in the
unlikely event that the product needs to be returned
for servicing.
WelcomeA personal welcome to you from the management
and employees of Inter-M
All of the co-workers here at nter-M are dedicated
to providing excellent products with inherently
good value, and we are delighted you have
purchased one of our products.
We sincerely trust this product will provide years
of satisfactory service, but if anything is not to
your complete satisfaction, we will endeavor to
make things right.
Welcome to nter-M, and thank you for becoming
part of our worldwide extended family!

5
PAM-MPM4 (CD MP3 TUNER Module)
Installation
Environment
Never place this product in an environment which
could alter its performance or reduce its service life.
Such environments usually include high levels of
heat, dust, moisture, and vibration.
ImportantSafetyInstructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. nstall in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. f the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
S3125A

6
PAM-MPM4 (CD MP3 TUNER Module)
the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
- AVO D EXCESS VE HEAT, HUM D TY, DUST AND
V BRAT ON
Keep the unit away from locations where it is likely to
be exposed to high temperatures or humidity-such as
near radiators, stoves, etc. Also avoid locations
which are subject to excessive dust accumulation, or
to vibration that could cause mechanical damage.
- AVO D PHYS CAL SHOCKS
Strong physical shocks to the unit may cause
damage. Handle the unit with care.
- DO NOT OPEN THE CASE OR ATTEMPT REPA RS
OR MOD F CAT ONS YOURSELF
This product contains no user-serviceable parts.
Refer all maintenance to qualified nter-M service
personnel. Opening the case and/or tampering with
internal circuitry voids the warranty.
- ALWAYS POWER OFF BEFORE MAK NG CONNECT ONS
Always turn the AC mains OFF before connecting or
disconnecting cables. This is important to prevent
damage to the unit itself as well as other connected
equipment.
- HANDLE CABLES CAREFULLY
Always plug and unplug cables (including the AC
mains power cord) by gripping the connector, not the
cord.
- CLEAN W TH A SOFT DRY CLOTH
Never use solvents such as benzine or paint thinner
to clean the unit. Wipe clean with a soft, dry cloth.

7
PAM-MPM4 (CD MP3 TUNER Module)
AdditionalExplanation■■
MP3 (MPEG AUDIO LAYE -3)
MP3 is one of music file formats that can contain music
with stereo sound quality similar to audio CD using a type
of MPEG which is compressive standards for audio and
video. About 3~5MB is sufficient if recording music for
3min~5min as the compression ratio is average 1Mb per
minute. n addition, 130 music or more can be contained
in a CD for songs or folk song if making music files with
MP3 differently from audio CD and MP3 has advantage in
play time of 10 hours. MP3 has also advantage of
compacting music into about 1/12 size while maintaining
sound quality of the CD level as it can remove frequency
range impossible for human to identify. For example,
capacity of 50MB or so can be achieved if extracting music
of a CD while maintaining sound quality of CD as it is but its
size can be largely reduced to 4~5MB if compressing and
converting it to a MP3.
■■
WMA (WINDOWS MEDIA AUDIO)
WMA is Microsoft’s multimedia compression method and is
technology to compress only music data from 'Window
Media Technologies'. t provides sound quality equivalent
to 128Kbps format of MP3 with 64Kbps format lower than
MP3. n other word, the file size of 1.2 MP3 provides same
sound quality as MP3.
■■
DIGITAL OUTPUT AND SPECIFICATIONS
Sound signal of a CD is recorded via digital-conversion and
digital sound signal is converted to analog signal by digital-
analog converter (DAC) within the usual player for output.
Conversely, electrical digital signals are substituted with
optical signal by coaxial cables, semiconductor or light
emitting diode (LED), etc and can be connected with other
devices with optical fiber cables. The device of the party
which received optical signals converts optical signals to
electrical signals for various treatments. Direct transmission
of digital data has advantage that there is less data error as

8
PAM-MPM4 (CD MP3 TUNER Module)
it is not affected by electrical noise than electrical signals.
Digital interface used in this product, which has format of
S/PD F (Sony/Philips/Digital/ nterface), complies with
standard specifications called EC958.
MethodtotreatCompactDisc(CD)
This device is a player only for a CD.
Please use a CD with following mark:
■■
Make the character surface where
music name, etc is described on if
mounting a CD on the disc tray of the DC
player.
■■
Open a case with holding the right ending part of a case with
the left hand and hold the both sides with the right hand from
below.
■■
Take off the CD with lightly holding both sides with the right
hand while pressing the center of the case with right thumb.
■■
Lightly wipe out the CD with a soft cloth if fingerprint or dirt is
stained on the signal recording surface. There is no sound
slot like general record in the CD. Wiping out dirt or fingerprint
stained with a smooth cloth if necessary is sufficient. There is
no obstacle to sound quality even if some dirt or fingerprint
remains.
■■
Record spray, charge preventing agent, benzene and
thinner, etc should not be used. The surface of a CD may be
damaged by these chemical drugs as it is a plastic product.
■■
Please keep the disc whose play is completed in a case. f
the disc is bent or damaged, sound may be broken or
become impossible to play with the disc.
■■
Avoid of leaving the disc at a place where direct light is
shone or which is disclosed to high temperature or a great of
humidity. Leaving it for a place where temperature is high
may cause deformation, etc.
■■
Do not paste papers, etc to the character surface or write
letters on it.

9
PAM-MPM4 (CD MP3 TUNER Module)
Characteristics■■
MODULE FO MOUNTING PAM SE IES
This is a module for mounting and is used with connecting
to PAM-SER ES.
■■
VA IOUS SOUND SOU CES
Desired sound source of the CD/USB/DRP (Digital
Recording Player: SD Memory) and Digital Tuner cannot
be output.
■■
MOUNTING AND EMOVAL OF USB AND TUNE
t is possible to mount on or remove from USB (Host) and
Tuner depending on basic function of CD + nternal
Memory (DRP).
■■
CD LONG-LIFE FUNCTION
Contents in a CD are saved at the nternal memory (DRP)
if play of a CD is completed with execution of the Long Life
function. Pickup Life of the CD mechanism is largely
increased as the contents of CD are actually played as
those saved in memory.
■■
CD MP3 COPY FUNCTION
Contents of CD MP3 to DRP and USB are copied.
■■
USB HOSTING FUNCTION
t is possible to execute copy with a DRP via USB or
directly play sound source of the USB.
■■
40 TOTAL MEMO IES OF TUNE
40 total memory functions exist with high sensitivity of
digital tuner. t is possible to conveniently memorize
frequency of the desired broadcasting stations for
convenient use.
■■
MP3 / WMA ESPONSE
This device responds to both CD-DA and MP3/WMA.

10
PAM-MPM4 (CD MP3 TUNER Module)
PartNamesandFunction
1
1.USB TE MINAL
This is a terminal to mount USB memory, which can play
MP3 or WMA file from USB and copy or save files from CD
MP3 or the nternal memory (DRP) too.
2
2.LONG-LIFE BUTTON
f pressing the Long-Life button for more than 2sec, this
function will save all music in a CD at the DRP within a
device and play them. You can prolong the life of the CD
mechanism by this function when continuing to play one CD
repeatedly.
3
3.SOU CE BUTTON
This is a button to select input signal and is changed in order
of CD →USB →DRP →TUNER.
4
4.DISC SLOT
This is a slot for CD. f inserting CD in the slot, it is
automatically inserted.

11
PAM-MPM4 (CD MP3 TUNER Module)
5
5.EPEAT/AUTO BUTTON
- This is used when playing in the mode of Repeat of 1
Music/ Repeat of All Music/ Sector Repeat.
- This is a button to select Manual or Automatic Music Select
mode when moving frequency from TUNER.
6
6.PLAY/PAUSE BUTTON
- This is a button used for play and pause of CD/USB/DRP
and the player temporarily stops if pressing this button
during play.
7
7.G OUP/MEMO Y BUTTON
- Use this button to move between folders when files exist
under various folders for MP3/WMA.
- This button is used to memorize broadcasting frequency
from TUNER operation.
8
8.EJECT BUTTON
- This button is used when taking out a CD.
9
9.DISPLAY WINDOW
- This is a window to display system operation information.
1
10 0.COPY BUTTON
- This button is used to copy CD MP3 disc or USB, DRP files.
- This button can copy CD MP3 to USB or DRP, and it also
possible file copy between DRP and USB.
- CD DA can be saved only to DRP due to regulatory
restriction related with copyright.
1
11 1.DEL BUTTON
- This button is used to delete music saved in USB and DRP.
1
12 2.ANDOM BUTTON
This is function to optionally play music in CD/USB/DRP.

12
PAM-MPM4 (CD MP3 TUNER Module)
1
13 3.CD SKIP DOWN / TUNE P ESET DOWN
- This is function to return to first part of the music currently
played or previous music.
- Used when moving the previous channel of the channel
memorized in TUNER.
1
14 4.CD SEA CH DOWN / TUNE TUNING DOWN
- This button is function to move the front part of the music
currently played.
- This function is used to decrease channel frequency from
TUNER.
1
15 5.CD SEA CH UP / TUNE TUNING UP
- This button is function to move the rear part of the music
currently played.
- This function is used to increase channel frequency from
TUNER.
1
16 6.CD SKIP UP / TUNE P ESET UP
- This button is function to move the next music of the music
currently played.
- This function is used to move the next channel of the
memorized channel at TUNER.
1
17 7.STOP/POWE BUTTON
- This button is function to stop during play of CD/USB/DRP.
t turns off if pressing this button long for more than 3sec.
1
18 8.SOU CE SOUND TUNING VOLUME
- This button is function to tune volume of the currently
selected source.

13
PAM-MPM4 (CD MP3 TUNER Module)
OperationMethod
- Set the volume to minimum before powering on.
- Make sure about properly connection of speaker and input
jack.
MethodtoUseFMTuner
1
1.Auto and Manual selection method of broadcasting
frequency
1) Select TUNER by pressing the Source button.
2) Frequency decreases or increases if pressing the TUNE ▼/▲(frequency DOWN/UP) button. You can select desired
broadcasting.
❇Auto Music Select: Auto Broadcasting Station Select mode is
selected if “AUTO” is displayed by pressing the
REPEAT/AUTO button. Operation of the Auto Broadcasting
Station Select starts if pressing the Frequency Up or Down
button and automatically stops at the position of broadcasting
frequency receivable. “TUNED” is displayed on the Display
Window and broadcasting is output.
❇Manual Select: Frequency can be increases or decreases in
unit of 50 / 100 KHz for adjustment by pressing the
Frequency Up or Down button shortly once. Frequency
moves until unhand if holding to press it for a long time. f
broadcasting frequency receivable is selected, “TUNED” is
displayed on the Display Window and broadcasting is output.
2
2.Memory method of frequency and recall of memorized
broadcasting channel
1) Select desired frequency with the TUNE ▼/▲(Frequency
DOWN/UP) button.
2) “ ▢M” is displayed on the Display Window and the address to
save flickers if pressing the MEMORY button.

14
PAM-MPM4 (CD MP3 TUNER Module)
3) Selected broadcasting frequency is saved at the relevant
address if pressing the MEMORY button by selecting the
address to memorize with the PRESET ▼/▲button. The
saved channel number appears on the Display Window and
the Memory indication turns off. n this case, saving is done
the given address even though current frequency is saved at
other address.
4) No. 1 through No. 40 frequencies can be saved.
5) Memorized broadcasting frequency can select the desired
broadcasting frequency using the PRESET ▼/▲ button.
MethodtoUseCD
EFFECTIVE FILE P OCESSING NUMBE S OF CD MP3
A E 499 FILES. ONLY 499 FILES A E ECOGNIZED
EVEN IF MO E THAN 500 FILES A E STO ED IN A
DISC.
1
1.PLAY FUNCTION
1) Select CD by pressing SOURCE button in the front panel.
2) “NO D SC” is displayed on the Display Window if there is no
disc and represents Standby status.
3) Lightly push a disc until it is automatically inserted into the
Disc nsert Window.
4) Reading music information of disc is displayed on the Display
Window and the mode becomes Standby status.
For the CD DA: 00(track numbers) 000:00 (total play time
indication)
For the CD MP3: 00(folder numbers) 000(total file numbers)
5) Operate by pressing the PLAY/PAUSE button. n this case,
CD is played from the first music of CD.
6) Pressing the STOP/POWER button enables to stop play.
❇Caution: Disc whose status is not good or where play is not
possible is automatically ejected.
Check the disc status once more as it is not failure of system.
Use only disc with size of 12cm and never use CD with size
of 8cm.

15
PAM-MPM4 (CD MP3 TUNER Module)
2
2.PLAY/PAUSE FUNCTION
1) nserting a disc enables to become standby status after
automatically reading information. The CD DA displays up to
99music and the CD MP3 displays up to 499music.
❇Music is only played as music numbers displayed.
❇For MP3, all files may not be displayed depending on status
of disc.
2) Press the PLAY/PAUSE button to play. Press the PLAY/
PAUSE button to temporarily stop.
3) n this case, pressing the PLAY/PAUSE button enables to
release the function and continuing play is done from the
current part.
3
3.EJECT FUNCTION
1) This function is used to take out disc.
2) Disc comes out if pressing this button irrespective of
operation status of CD player.
❇EJECT button does not operate when LONG L FE function
operates.
4
4.EPEAT FUNCTION
Conversion is done in the order of REPEAT 1 →REPEAT
ALL →REPEAT BL →OFF whenever converting and
pressing the REPEAT button.
Reference) Both REPEAT 1 and REPEAT ALL operate
during play, and the REPEAT1, REPEAT ALL and REPEAT
BL operate during stop.
1) REPEAT 1 function
This is function to repeat and play a music.
“REPEAT 1” is displayed on the Display Window during play
or if pressing the REPEAT button once and the pressing the
Play button. Music currently played is continuingly and
repetitively played.
Function of REPEAT 1 is released if selecting RANDOM
function.
GROUP function during play is also set for the CD MP3 disc.

16
PAM-MPM4 (CD MP3 TUNER Module)
2) REPEAT ALL function
This function is used to repetitively play the whole sector of
disc.
“REPEAT ALL” is displayed on the Display Window during
play or if pressing the REPEAT button twice. The whole
music of the disc currently played is continuingly and
repetitively played.
RANDOM function is performed if selecting the function at
the same time as function of REPEAT ALL.
GROUP function is also set during play for the CD MP3 disc.
❇However, both GROUP function and RANDOM function
cannot be set at a time.
3) REPEAT BL function
This function is used if desiring to repetitively hear files within
the sector selected by user among music in disc at stop
status.
001-001 is displayed if selecting REPEAT BL and you can
select and hear desired music by the SK P ◀◀/ ▶▶
button.
Example) Method to set from Track No.22 to Track No. 30
when 47 music exist.
Check that (‘001’-001) is displayed if setting REPEAT BL →Check that the first start music (‘022’-022) is selected by
pressing the ▶▶Ibutton →Press the PLAY/PAUSE button
→Check (022-‘022’) →Check that the last music (022-‘030’)
is selected by pressing the ▶▶Ibutton →Press the
PLAY/PAUSE button →REPEAT BL function is performed.
n this case, the SEARCH ◀◀/ ▶▶button is used when
moving to the First Track and the Last Track of the sector
during setting of sector.
This function is used when repeating only sector of track or
file.
No RANDOM or GROUP function operates during operation
of this function.
This function is released and stops if pressing this STOP
button.

17
PAM-MPM4 (CD MP3 TUNER Module)
5
5.ANDOM FUNCTION
1) This function is used when desiring to randomly hear music
in the current disc.
2) “RANDOM” is displayed on the Display Window if pressing
RANDOM button during stop. Music is randomly played in
random sequence if pressing the PLAY/PAUSE button.
Pressing the RANDOM button during play enables to pass
music currently played to the next RANDOM music.
3) Only REPEAT ALL function is added and operated like
RANDOM if pressing the REPEAT button during play.
n this case, only REPEAT ALL is set.
4) Press the RANDOM button once more if desiring to cancel
RANDOM function.
n this case, REPEAT ALL is not released if REPEAT ALL
function is set.
6
6.G OUP UP/DOWN FUNCTION
1) This function is only possible if saving files at a PC with
classification of folder for the MP3 CD. Music moves in unit of
directory.
2) “GROUP” is displayed on the Display Window if pressing the
GROUP button during play. n this case, pressing the
SK P ◀◀/ ▶▶button enables to move between folders if
pressing the button and play is executed from the first music.
n this case, REPEAT 1, REPEAT ALL functions are
performed together if pressing the REPEAT button.
GROUP function released and RANDOM function is
performed if selecting RANDOM function. REPEAT 1
function is also released if it is set.
GROUP function is released and both RANDOM and
REPEAT ALL are performed if selecting RANDOM function
with GROUP and REPEAT ALL function set.

18
PAM-MPM4 (CD MP3 TUNER Module)
3) The function is released if pressing the GROUP button once
more where GROUP function is executed.
4) GROUP function is released and becomes Standby status if
pressing the STOP button where GROUP function is
performed.
❇GROUP function is only used during play.
7
7.CD COPY FUNCTION
1) This is function to save files in a CD to nternal memory
(DRP) or USB memory.
** CD DA is saved only in DRP.**
2) Pressing the COPY button in STOP status enables to convert
to COPY Standby mode and memory position to be saved
on the Display Window flickers.
3) elect position to save using the SK P ◀◀/ ▶▶button for
the CD MP3 disc. (USB or DRP)
Only DRP can be selected if USB memory is not built-in.
The CD DA can be saved only in a DRP.
4) Pressing the PLAY/PAUSE button enables to proceed to the
next step and TRACK or ALL is selected by the SK P ◀◀/ ▶▶
button.
5) n case to select ALL, press the PLAY/ PAUSE button.
6) Display is executed to input track range if pressing the
PLAY/PAUSE button where TRACK is selected.
Enter number of Start Track and number of End /Track using
the SK P ◀◀/ ▶▶button.
Example)
Method to set track No.22 and track No.30 if there are 47
music for CD MP3.
CD >> DRP pressing the COPY button →Possible to select
USB or DRP pressing the SK P ◀◀/ ▶▶button →Press
the PLAY/PAUSE button →Check TRACK indication →Possible to select TRACK or ALL if pressing the SK P ◀◀/ ▶▶
button (in this case all music are saved if pressing the PLAY
button after selecting ALL) →(for setting of TRACK) Check
that ‘001’-001 is displayed →Select the first start music by

19
PAM-MPM4 (CD MP3 TUNER Module)
pressing the ▶▶Ibutton →Check (‘022’-022) is displayed
→Press the PLAY/PAUSE button →Check that (022-‘022’)
is displayed →Check that the last music (022-‘030’) is
selected by pressing the ▶▶Ibutton →Press the
PLAY/PAUSE button →COPY function is performed.
(Copy operation is executed from Track No.22 to Track No.
30.)
n this case, the SEARCH ◀◀/ ▶▶button is used for
movement to the Set Step during Copy Setting.
7) The mode is released if pressing the Stop button during copy.
Only track that F LE COPY is completed is saved in the
relevant memory.
8) Signal is output during copy operation of the CD DA but it is
not output for the CD MP3. So minimize volume only if
desiring to copy.
MethodtoUseLong-Life■■
LONG-LIFE FUNCTION IS METHOD TO LA GELY
P OLONG THE LIFE OF MECHANISM WITH SIMPLE
MANIPULATION.
1) Long-Life function is used when largely prolonging the life of
a CD.
2) Contents of CD are copied and sound source is played after
SOURCE is automatically converted to CD if pressing the
Long-Life button for more than 2sec.
3) Files saved in DRP are played if copy is completed.
❇n this case, the mode is displayed as DRP and REPEAT
ALL function operates.
4) The mode is released if pressing STOP button during play.
Only track that play is completed is saved in memory. Play
stops in this status.
★All files in DRP are removed if Long-Life function is executed.
Files in DRP are firstly cleared if Long-Life function starts.
mportant files should be copied in USB and time of deleting
files in DRP may be long.★

20
PAM-MPM4 (CD MP3 TUNER Module)
❇f Long-life function is operated, all button except STOP
button is not operating.
❇f Long-life function is operated, the signal is generated in
REC of CD-DA but in case of CD MP3, the signal is not
generated.
MethodtoUseDRP/ USB■■
USB CANNOT BE CONNECTED WITH A PC USING
HOST FUNCTION.
1
1.PLAY FUNCTION
1) Select DRP or USB by pressing the SOURCE button.
2) “NO F LE” is displayed on the Display Window if there are no
files. File information (numbers of files can play) and folder
numbers are displayed if there are files.
3) Operate by pressing the PLAY/PAUSE button. n this case,
play is executed from the first file.
4) t stops if pressing the STOP/POWER button.
2
2.PLAY/PAUSE FUNCTION
1) Up to 999 played files are displayed by automatically reading
memory if selecting DRP or USB.
❇More than 999 music are not played.
2) Press the PLAY/PAUSE button to play and press the
PLAY/PAUSE button once more to temporarily stop.
3) Press the PLAY/PAUSE button a second time to release
PAUSE function and files are continuingly played from the
current part.
3
3.EPEAT FUNCTION
Conversion is executed in the order of REPEAT 1 →REPEAT ALL →REPEAT BL →OFF whenever pressing
the REPEAT button for conversion.
Reference) REPEAT 1 and REPEAT ALL operate during
play and REPEAT1, REPEAT ALL and REPEAT BL operate
at stop.