Intergraph InterServe 9400 User manual

D5AA00092, 09/99
InterServe 9400
Late-Breaking News
Hardware
Intel Server Control (ISC) Errors
The first time you run Intel Server Control (ISC) after installation, you may see DMI indications
and SNMP traps. The first time ISC runs, it processes all messages in the System Event Log,
regardless of the date and time an event happened, and generates DMI indications. If SNMP
services are enabled, ISC will also generate an SNMP trap for each indication. After the System
Event Log has been processed once, only new entries generate DMI indications and SNMP traps.
Some DMI indications and SNMP traps may report critical status or failure of some hardware
components. If you are running ISC for the first time, you may safely ignore these indications and
traps. They are caused by events recorded in the System Event log during a period when ISC is
initializing for the first time and is unable to report accurate status. You may want to confirm that
all components are working correctly by examining the System Event Log for Informational
messages stating that the failing components have returned to a functioning state. You may also
want to clear the System Event Log.
After you run ISC for the first time, you should investigate as legitimate errors any DMI
indications or SNMP traps that are generated.
For more information, refer to DOCS\README.TXT in the directory in which you installed ISC.
Software
Rebuilding System Software with SYSBUILDER and the System CD
If your system was delivered with a SYSBUILDER diskette, you can use it and the System CD to
rebuild system software. Follow the instructions provided with the System CD to reinstall the
operating system and associated system software. The System CD’s instructions replace the
operating system installation instructions in your system’s documentation.

2
Copyright
1999 Intergraph Computer Systems. All rights reserved. This document contains information protected by copyright, trade secret,
and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any
derivative work, without written consent from Intergraph Computer Systems.
Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of the
rights in technical data and computer software clause at DFARS 252.227-7013. Unpublished rights are reserved under the copyright
laws of the United States.
Intergraph Computer Systems, Huntsville AL 35894-0001
Notice
Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer
Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document.
Intergraph Computer Systems shall not be liable for incidental or consequential damages resulting from the furnishing or use of this
document.
All warranties given by Intergraph Computer Systems about equipment or software are set forth in your purchase contract. Nothing
stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such
warrantites.