Intermec CV60 User manual

CV60 Recovery CD
Instructions

ii CV60 Recovery CD Instructions
Intermec Technologies Corporation
Worldwide Headquarters Technical Communications
6001 36th Ave.W. 550 Second Street SE
Everett, WA 98203 Cedar Rapids, IA 52401
U.S.A. U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of
allowing customers to operate and service Intermec-manufactured
equipment and is not to be released, reproduced, or used for any other
purpose without written permission of Intermec Technologies Corpo-
ration.
Information and specifications contained in this document are subject
to change without prior notice and do not represent a commitment on
the part of Intermec Technologies Corporation.
© 2003-2006 by Intermec Technologies Corporation. All rights
reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage
Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder,
EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intell-
itag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work,
RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing,
TE 2000, Trakker Antares, and Vista Powered are either trademarks or
registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patent
applications pending.
Document Change Record
This page records changes to this document. The document was origi-
nally released as Revision A.
Revision
Letter Date Description of Change
C 07/2006 Written for version 2.00 (RoHS), these instruc-
tions replaced PowerQuest information with
Symantec Ghost information.

Contents
CV60 Recovery CD Instructions iii
Contents
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . iv
Safety Information. . . . . . . . . . . . . . . . . iv
Global Services and Support . . . . . . . . . iv
Who Should Read These Instructions? . vi
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Using Network Connections to Restore an
Image . . . . . . . . . . . . . . . . . . . . . . . . . 1
Client (CV60 PC). . . . . . . . . . . 1
Server (Personal Computer) . . . 1
CD-ROM Drive Sharing . . . . . 1
File Sharing on your Server
(Personal Computer) . . . . . . 2
Creating a Bootable Floppy Disk. . . . . . . 2
Creating a Custom Image Restore Floppy 3
Running the Boot Floppy Disk Restore on
the CV60 . . . . . . . . . . . . . . . . . . . . . . 4
Restoring an Image on the CV60
(Using the CD-ROM) . . . . . . . . . . . . 4
Booting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warm Boot . . . . . . . . . . . . . . . . . . . . . . . 5
Cold Boot . . . . . . . . . . . . . . . . . . . . . . . . 5

iv CV60 Recovery CD Instructions
Before You Begin
This provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
This section explains how to identify and understand notes that
are in this document..
Note: Notes either provide extra information about a
topic or contain special instructions for handling a par-
ticular condition or set of circumstances.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec web site at www.intermec.com and click Service &
Support. The Intermec Global Sales & Service page appears.
From the Service & Support menu, move your pointer over Sup-
port, and then click Warranty.
Disclaimer of warranties: The sample code included in this docu-
ment is presented for reference only. The code does not necessar-
ily represent complete, tested programs. The code is provided “as
is with all faults.” All warranties are expressly disclaimed, includ-
ing the implied warranties of merchantability and fitness for a
particular purpose.
Web Support
Visit the Intermec web site at www.intermec.com to download
our current manuals (in PDF). To order printed versions of the
Intermec manuals, contact your local Intermec representative.
To download a PDF manual
1Visit the Intermec web site at www.intermec.com.
2Click Service & Support > Manuals.
3In the Select a Product field, choose the product whose docu-
mentation you want to download.
Visit the Intermec technical knowledge base (Knowledge Cen-
tral) at intermec.custhelp.com to review technical information or
to request technical support for your Intermec product.

CV60 Recovery CD Instructions v
Telephone Support
These services are available from Intermec Technologies.
Order Intermec
products
• Place an
order.
•Askaboutan
existing
order.
1 and then choose 2
Order Intermec
media
Order printer
labels and
ribbons.
1 and then choose 1
Order spare parts Order spare parts 1 or 2 and then choose 4
Technical Support Talk to technical
support about
your Intermec
product.
2 and then choose 2
Service • Get a return
authorization
number for
authorized
service center
repair.
• Request an
on-site repair
technician.
2 and then choose 1
Service contracts •Askaboutan
existing con-
tract.
• Renew a con-
tract.
•Inquireabout
repair billing
or other ser-
vice invoic-
ing questions.
1 or 2 and then choose 3
Service Description
In the U.S.A. and
Canada, call 1-800-
755-5505 and choose
this option

vi CV60 Recovery CD Instructions
Outside the U.S.A. and Canada, contact your local Intermec rep-
resentative. To search for your local representative, from the
Intermec web site, click Contact.
Who Should Read These Instructions?
These instructions are written for the person who is responsible
for installing, configuring, and maintaining the CV60 Vehicle
Mount Computer. These instructions provide you with informa-
tion on how to install, configure, and troubleshoot the recovery
of the CV60.
Before you work with the recovery CD, you should be a trained
service person or one familiar with forklift truck service and
maintenance.

CV60 Recovery CD Instructions 1
Introduction
The CV60 Recovery Tools CD-ROM restores the partition on a
CV60 Vehicle Mount Computer. The CV60 Recovery Tools
CD can be shared from a server and executed on a client CV60
PC. More specifically, the CV60 Recovery Tools CD can:
•WhenusedwithSymantec Ghost, you can take a snapshot of a
CV60 main hard drive partition and convert the image to a
Ghost (GHO) file to restore on other systems. You must install
a full copy of the Symantec Ghost Solution Suite onto the server.
• Update the CV60 partition with any provided GHO file.
Using Network Connections to Restore an Image
Client (CV60 PC)
The client CV60 must have the following before doing the net-
work recovery partition:
• Phoenix BIOS version 1.21 or later
• 10BaseT connection to a Network
• an attached PS/2 keyboard
•aUSBfloppydrive
Server (Personal Computer)
The server must have a 10BaseT/100BaseT connection to a Net-
BEUI or TCP/IP network and can be running Windows 2000 or
XP before restoring Windows CE, XP Professional, or XP
Embedded on the CV60 Computer.
CD-ROM Drive Sharing
Share the contents of the CV60 Recovery CD among the client
CV60s. Note that drive D:\ is used for this example. Insert the
CV60 Recovery CD-ROM in the server CD-ROM drive, then
do the following to share the drive:
1From the Windows desktop, double-click My Computer,
then right-click the CD-ROM drive for a pop-up menu.
2Select Sharing to access the CD-ROM Properties window,
then click Shared As to enable the applicable fields. Type
Note: This folder must be shared between the CV60
Computer and the server. For example,
“C:\CV60base\Update.”

2 CV60 Recovery CD Instructions
“CDROM” for the share name, click OK to quit, then exit
My Computer.
File Sharing on your Server (Personal Computer)
Copy the Images and Bin folders from the Recovery Tools CD
ROM to your hard disk for sharing. Share the folder to which
you copied them.
Creating a Bootable Floppy Disk
1Insert the CV60 Recovery CD into your CD-ROM drive.
2Select Yes, I accept the agreement for the main menu.
3Select Create a Bootable Floppy Disk from the menu to start
the Boot Disk Builder application.

CV60 Recovery CD Instructions 3
4Enter the required information aboutWorkgroup/Domain,
Server Name, Share Name, Computer Name and User Name
into the text boxes. This information is saved for network
login when you run the floppy disk setup for network restore.
Creating a Custom Image Restore Floppy
1Select an Image Type for the operating system.
2Check Custom to create a custom image.
3Click Format to have Boot Disk Builder create the boot disk.
Note: When building a custom image recovery floppy,
you must specify a unique image name (other than the
default) in the text box.

4 CV60 Recovery CD Instructions
Running the Boot Floppy Disk Restore on the CV60
Note: The network recovery boot menu will prompt
you to enter the user name and password. If the user
name is correct, press Enter to continue.
1Plug a USB floppy disk drive to one of the USB ports on the
CV60.
aCheck the BIOS settings for floppy disk boot.
bPress [F2] to enter the setup.
cMake sure the setting is at the top of the Boot list.
2Place the boot floppy disk into the USB floppy disk drive.
3Boot the CV60.
4The recovery process will prompt you for user name and pass-
word list. If you create a password list, the next time you boot
from the floppy, it will not ask you for user name and pass-
word again.
5The CV60 loads the Symantec Ghost Utility from the network
location you specified in the Boot Disk Builder menu.
6When the restore is finished, power off the CV60 and remove
the USB floppy drive.
7Power the CV60 back on. Your image should be restored.
Restoring an Image on the CV60 (Using the CD-ROM)
1Plug a USB CD-ROM drive to one of the USB ports on the
CV60.
aCheck the BIOS settings for CD-ROM boot.
bPress [F2] to enter Setup.
cMake sure the CD-ROM Drive setting is at the top of the
Boot list.
2Place the Recovery Tools CD into the USB CD-ROM drive.
3Boot the CV60.
4The CV60 will load Symantec Ghost Utility from the CD-
ROM and restore the image.