involight AX470 User manual

1
LED 8-Panel Effect Light, 1*10W 4-in-1 RGBW Manual
Our LED 8- panel effect light offers many possibilities to achieve the effects which you want.It is designed for the
stages,disco,night clubs etc,even the building halls.Please read the manual before operation.
SPECIFICATION:
1. Size: 26.5*25*18.5cm
2. Weight: 3.6 kgs
3. Voltage: 110V-240V
4. Power consumption: 36W
5. LEDs:1cps*4 (RGBW)
6. Function:DMX,auto running,build in programs,slave mode,sound active mode,digital tube can be inverted,digital
7. Plug on or off,display the No.of the version
8. DMX channel:4CH
9. LED display for easier operation
10. Fit for disco,bar,KTV,outside show etc.
11. Perfect laser effect,dynamic
12. Necessary fittings,like extend cable,IR remote controller etc
OPERATION
1. Auto Running
1) Press the "MODE",enter the auto running mode“AUTO”.
2) Press the "SETUP",enter the speed menu for the auto running“SP××”.
3) Press the "UP"or"DOWN"to set up the speed value SP01~SP100（FL）.
4) Press the "SETUP",enter the strobe menu of the auto running mode“FS××”.
5) Press the "UP"or "DOWN"to set up the strobe value FS00~99.
2. DMX mode
1) Press the "MODE",enter the DMX mode“d×××”.

2
2) Press the "UP"or"DOWN" to set up the DMX address value d001—d512.
3) Press the "SETUP"enter the DMX mode:4ch.
DMX agreement list：
CHANNEL
VALUE
FUNCTION
NOTES
1
(Mode)
000-009
BLACKOUT
010-019
R
020-029
G
030-039
B
040-049
W
050-059
RG
060-069
RB
070-079
RW
080-089
GB
090-099
GW
100-109
BW
110-119
RGB
120-129
RGW
130-139
RBW
140-149
GBW
150-159
RGBW
160-229
AUTOMATIC
230-255
SOUND-ACTIVATED
2
(Strobe)
000-009
NO STROBE
010-229
010-255
STROBE SLOW TO FAST
3
(Speed)
000-009
NO FUNCTION
WORKS ONLY WHEN CH 1 IS BETWEEN
160-229 (AUTO)
010-255
SLOW TO FAST
4
(Motor)
000-009
NO ROTATION
WORKS ONLY WHEN CH 1 IS BETWEEN
010-149
010-119
ROTATE LEFT FAST TO
SLOW
120-145
STOP
146-255
ROTATE RIGHT SLOW TO
FAST
3. Slave Mode
Press the "MODE",enter the slave mode“SLAV”.
4. SoundActive Mode
Press the "MODE",enter the sound active mode“SoUn”.
5. LED Display Mode

3
1) Press the "MODE",enter the menu of the manual control the LED display mode“Led”.
2) Press the "SETUP",enter to set up the LED display on or off.
3) Press the "UP"or"DOWN" to set up the LED display on or off.
Remarks
when it is on, the LED display will light;when it is off,the LED display will turn off after 30 seconds.
6. LED Display Inversion
Press the "MODE",enter the LED display inversion mode“dISP”.
Press the "SETUP",choose the LED display standard display as"dISP"or inversion display as "dSIP".
7. Version
Press the "MODE", enter the program version No.
press the "SETUP", it will show the version No. V10.