ION iED12 User manual

Confidential ION Audio Service Manual
ION Audio
PRO SESSION
DRUMS Module
[iED12]
Service Manual
Rev. 1
2010.06.25
The information in this document contains privileged and confidential information. It is intended
only for the use of those authorized by ION Audio. If you are not the authorized, intended
recipient, you are hereby notified that any review, dissemination, distribution or duplication of this
document is strictly prohibited. If you are not authorized, please contact ION Audio and destroy
all copies of this document. You may contact ION Audio at [email protected].
ATTENTION!
THIS DOCUMENT CONTAINS SENSITIVE
PROPRIETARY INFORMATION.
ALL RECIPIENTS MUST HAVE A CURRENT
NON-DISCLOSURE AGREEMENT ON FILE
WITH ION AUDIO, LLC.
DO NOT MAKE ILLEGAL
COPIES OF THIS DOCUMENT

Confidential ION Audio Service Manual
PREFACE
This document is intended to assist the service technician in the operation, maintenance and
repair of the ION Audio device. Together with the User Reference Manual, this document
provides a complete description of the functionality and serviceability of the Device. Any
comments or suggestions you may have pertaining to the document are welcome and
encouraged.
READ THIS!
In addition to any purchase price that ION Audio may charge as consideration for ION Audio
selling or otherwise transferring this service manual (“Manual”) to you, if you are not a service and
repair facility (“Service Center”) authorized by ION Audio in writing to be an authorized Service
Center, ION Audio sells or transfers the Manual to you on the following terms and conditions:
Only Service Centers authorized by ION Audio in writing are authorized to perform service and
repairs covered by an ION Audio warranty (if any), and transfer of the Manual to you does not
authorize you to be an authorized Service Center. Therefore, if you perform, or if the Manual
is used to perform, any service or repairs on any ION Audio product or part thereof, any
and all warranties of ION Audio as to that product and any service contract with ION Audio
for that product shall be voided and shall no longer apply for such product, even if your
services or repairs were done in accordance with the Manual.
All service or repairs done by you or with reference to the Manual shall be solely your
responsibility, and ION Audio shall have no liability for any such repairs or service work. All such
service or repairs are performed at the sole risk of the person performing the service or
repairs. You agree that all such work will be performed in a competent, professional and safe
manner at all times and to indemnify and fully hold ION Audio and its successors and assigns
harmless in the event of any failure to so perform.
Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of
resale or other transfer.
As the owner of the copyright to the Manual, ION Audio does not give you the right to copy the
Manual, and you agree not to copy the Manual without the written authorization of ION Audio.
ION Audio has no obligation to provide to you any correction of, or supplement to, the Manual, or
any new or superseding version thereof.
ION Audio shall have the right to refuse to sell or otherwise transfer repair parts or materials to
you in its sole discretion. You shall not use, sell or otherwise transfer spare or replacement parts
supplied by ION Audio to you (i) to repair or be used in products manufactured for or by third
parties or (ii) to any third parties for any purpose.
You shall not make any warranties or guarantees with respect to the products of ION Audio or the
use thereof on behalf of ION Audio or in your own name.
The foregoing describes the entire understanding related to sale or transfer of the Manual to you,
and no other terms shall apply unless in a writing signed by an authorized representative of ION
Audio.
All Trademarks are property of their respective companies.

Confidential ION Audio Service Manual
WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE
THIS PRODUCT TO WATER OR MOISTURE.
The arrowhead symbol on a lightning flash inside a triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the enclosed product which may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point inside a triangle is intended to alert the user
to the presence of important operating, maintenance and servicing
instructions in the literature which accompanies the product.
REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED ION
AUDIO SERVICE CENTER WILL VOID THE ION AUDIO WARRANTY.
PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO
COMPETE WITH ANY ION AUDIO DISTRIBUTOR OR AUTHORIZED REPAIR
SERVICE CENTER IN THE PROVISION OF REPAIR SERVICES OR TO BE
OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER.
ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED ION
AUDIO SERVICE CENTER SHALL BE SOLELY THE RESPONSIBILITY OF
THAT ENTITY, AND ION AUDIO SHALL HAVE NO LIABILITY TO THAT
ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.
Regarding the Power Supply Fuse
CAUTION: The product under service may employ the use of a
replaceable fuse. Danger of fire or electrocution if fuse is incorrectly
replaced. Replace with only the same type or equivalent type
recommended by the equipment manufacturer.
Regarding the Internal Battery
CAUTION: The product under service may employ the use of a
internal battery. Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instruction.

Confidential ION Audio Service Manual
Safety Instructions
Carefully read the applicable items of the operating instructions and these safety suggestions
before using this product. Use extra care to follow the warnings written on the product itself and in
the operating instructions. Keep the operating instructions and safety suggestions for reference in
the future.
1. Power Source. The product should only be connected to a power supply which is described
either in the operating instructions or in markings on the product.
2. Power Cord Protection. AC power supply cords should be placed such that no one is likely to
step on the cords and such that nothing will be placed on or against them.
3. Periods of Non-use. If the product is not used for any significant period of time, the product's
AC power supply cord should be unplugged from the AC outlet.
4. Foreign Objects and Liquids. Take care not to allow liquids to spill or objects to fall into any
openings of the product.
5. Water or Moisture. The product should not be used near any water or in moisture.
6. Heat. Do not place the product near heat sources such as stoves, heat registers, radiators or
other heat producing equipment.
7. Ventilation. When installing the product, make sure that the product has adequate
ventilation. Improperly ventilating the product may cause overheating, which may damage the
product.
8. Mounting. The product should only be used with a rack which the manufacturer
recommends. The combination of the product and rack should be moved carefully. Quick
movements, excessive force or uneven surfaces may overturn the combination which may
damage the product and rack combination.
9. Cleaning. The product should only be cleaned as the manufacturer recommends.
10. Service. The user should only attempt the limited service or upkeep specifically described in
the operating instructions for the user. For any other service required, the product should be
taken to an authorized service center as described in the operating instructions.
11. Damage to the Product. Qualified service personnel should service the unit in certain
situations including without limitation when:
a. Liquid has spilled or objects have fallen into the product,
b. The product is exposed to water or excessive moisture,
c. The AC power supply plug or cord is damaged,
d. The product shows an inappropriate change in performance or does not operate
normally, or
e. The enclosure of the product has been damaged.

002020051 Name:
IED12 Unit:
Level Part Number Name Description Qty Remark
+ 1021800380 Sound Source ASSY IED12 1.00000
++ 102040105 Sound source top cabinet
ASSY IED12 1.00000
+++ 629020232 Swing silicone rubber button BlackSilica gel silk print “+”“-” white Making carbon Modify tooling
cut slot 1.00000
+++ 629020144 Silica gel button RUB-0035 Black no printing surface Ra carving Painting carbon 3.00000
+++ 629020145 Silica gel button RUB-0035 Black no printing Painting carbon 6.00000
+++ 208020013 Volume bright knob ABS Injection molding primary colors Silver paint spray 877C 1.00000
+++ 301110010 screw BB 2.6*6BB black Zn plating “+” Dual teeth PWB 8.00000
+++ 101030138 Function board ASSY IED12 Domestis 1.00000
++++ 504010015 PCB Fake Dual layer 94HB
1.6mm LDK6 Function PCB carbon LDK6-FB-V02 1.00000
++++ 619010023 LED dual color red/green masculine 3MM WEJ3290C-R2KH4-BA 1.00000 D15
++++ 619030012 3bit digital LED red WEJE30561-I00W-1 anode 1.00000 LED1
++++ 619010008 LED red WEJ3148D LED 4mm 12.00000 D1-D8 D11-D14
++++ 608050001 Switch Diode DIP IN4148 DIP TYPE 5.00000 D19 D17 D20 D18 D10
++++ 628070781 Gray flat cable with cathode
plug 16PIN L=40mm UL2651#26 With 16PIN/2.0mm connected header 1.00000 S7
++++ 628070782 Gray flat cable with cathode
plug 8PIN L=40mm UL2651#26 With 8PIN/2.0mm connected header 1.00000 J3
++++ 628140010 jump single flat cable 7.5mm 10.00000 J4 J5 J6 J7 J8 J10 J11 J12 J9 J13
++++ 611010008 ROTARY Potentiometer dual join 10KA linearity 2*10K LOG ROTARY POT 1.00000 VR1
++++ 628070784 Gray flat cable with cathode
plug 5PIN L=40mm UL2651#26 With 5PIN/2.0mm connected header 1.00000
+++ 642010178 Display PC Black Matrix silver 877C T:1mm Print ion 1.00000
+++ 21201017602 Top cabinet of module HIPS Injection black surface unprocessed modify tooling add add
plasitc texture change to YS1285B 1.00000
++ 1020500920 Sound source Bottom cabinet
ASSY IED12 1.00000
+++ 212040014 Bottom cabinet of module HIPS Injection black silkscreen silver ion 1.00000
Bill of Material
Code: Electronic Drum
Model: Set

+++ 302010014 Outer Hexagon Nut M6 Thickness4.2mm Iron black Zn plating 1.00000
+++ 212010019 Butterfly nut DL-1236 ABS Injection Black N/A 1.00000
+++ 322990006 Dentiform lock ring Short Handle 27mm Quencher ID10.5*OD25*7 1.00000
+++ 301070006 screw PWB 3*8PWB(W DIA11.5MM) black crisscross PWB 2.00000
+++ 301070031 screw PWB 3*4.5PWB black crisscross PWB 2.00000
+++ 302010031 Hexagon Nut M4 Thickness3.0mm black 2.00000
+++ 301110006 screw BB 2.6*12BB(D=3.0mm) black “+” PB 6.00000
+++ 1010102540 Main board ASSY IED12 MAIN PCB 1.00000
++++ 1010102550 Main board ASSY(SMD part) IED12 Export 1.00000
+++++ 506040156 PCB Dual layer FR4 1.6mm LDK6 Main Board PCB V07 Silk screen，Green oil，sn plated 1.00000
+++++ 602010004 Resistor SMD 0 ohm(1/10w)+5%-5% 0603 3.03000 R144 JM1 JM3
+++++ 602010010 Resistor SMD 100 ohm(1/8w)+5%-5% 0603 8.08000 R119-120 R158 R173-177
+++++ 602010016 Resistor SMD 1K ohm(1/10w)+5%-5% 0603 22.22000
R1-2 R4-7 R9 R61 R76 R89-90 R92
R94-95 R110 R117 R123-124 R143
R118 R121-122
+++++ 602010018 Resistor SMD 10K ohm(1/8w)+5%-5% 0603 39.39000
R32 R33-34 R36-37 R40-43 R49-53
R73-74 R88 R91 R98 R100-102 R104
R109 R135 R137-142 R151 R153-155
R160-161 R152 R56
+++++ 602010023 Resistor SMD 100K ohm(1/10w)+5%-5% 0603 10.10000 R8 R59 R63-64 R66-67 R70-71 R156
R159
+++++ 602010025 Resistor SMD 1M ohm(1/8w)+5%-5% 0603 2.02000 R54-55
+++++ 602010050 Resistor SMD 1.5K ohm(1/8w)+5%-5% 0603 1.01000 R3
+++++ 602010198 Resistor SMD 15K ohm(1/8w)+5%-5% 0603 2.02000 R75 R93
+++++ 602010069 Resistor SMD 2K ohm(1/8w)+5%-5% 0603 1.01000 R157
+++++ 602010199 Resistor SMD 20K ohm(1/8w)+5%-5% 0603 2.02000 R39 R147
+++++ 602010082 Resistor SMD 2.2K ohm(1/10w)+5%-5% 0603 8.08000 R78 R87 R105-108 R171-172
+++++ 602010084 Resistor SMD 22K ohm(1/10w)+5%-5% 0603 4.04000 R79 R82-84
+++++ 602010086 Resistor SMD 220K ohm(1/8w)+5%-5% 0603 1.01000 R15
+++++ 602010097 Resistor SMD 2.7K ohm(1/10w)+5%-5% 0603 2.02000 R97 R99
+++++ 602010098 Resistor SMD 27K ohm(1/16w)+1%-1% 0603 1.01000 R38

+++++ 602010102 Resistor SMD 3K ohm(1/8w)+5%-5% 0603 1.01000 R148
+++++ 602010118 Resistor SMD 33K ohm(1/10w)+5%-5% 0603 9.09000 R16-18 R21 R162-166
+++++ 602010326 Resistor SMD 360K ohm(1/16w)+1%-1% 0603 3.03000 R11-12 R22
+++++ 602010145 Resistor SMD 4.7K ohm(1/8w)+5%-5% 0603 9.09000 R24 R27-29 R103 R111 R128 R136
R150
+++++ 602010151 Resistor SMD 47K ohm(1/8w)+5%-5% 0603 3.03000 R68-69 R145
+++++ 602010155 Resistor SMD 470K ohm(1/16w)+1%-1% 0603 8.08000 R13-14 R19-20 R25-26 R30 R45
+++++ 602010197 Resistor SMD 51K ohm(1/10w)+5%-5% 0603 2.02000 R62 R170
+++++ 602010204 Resistor SMD 5.6K ohm(1/8w)+5%-5% 0603 2.02000 R80-81
+++++ 602010301 Resistor SMD 6.2K ohm(1/8w)+5%-5% 0603 1.01000 R146
+++++ 602010181 Resistor SMD 6.8K ohm(1/16w)+5%-5% 0603 6.06000 R35 R60 R169 R31 R167 R44
+++++ 602010189 Resistor SMD 8.2K ohm(1/8w)+5%-5% 0603 2.02000 R77 R86
+++++ 602010002 Resistor SMD 0 ohm(1/8w)+5%-5% 0805 9.09000 L12-15 L22 L28-31
+++++ 602010007 Resistor SMD 10 ohm(1/8w)+5%-5% 0805 3.03000 R112-114
+++++ 602010157 Resistor SMD 4.7 ohm(1/8w)+5%-5% 0805 4.04000 R72 R85 R96 R125
+++++ 602030003 Resistor chain SMD 100 ohm(1/16w)+5%-5% CRN164 28.14000
AR4 AR8 AR12-14 AR16 AR18-19
AR23-25 AR28-37 AR40-42 AR44-47
+++++ 602030020 Resistor chain SMD 4.7K ohm(1/16w)+5%-5% CRN164 11.05500 AR1-3 AR6-7 AR15 AR22 AR26-27
AR20-21
+++++ 603010018 CAP CERAMIC SMD 100Nf/25V +10% -10% 0603 X7R 47.47000
C20 C35 C38 C40 C42 C44 C46 C48
C50-51 C54 C57 C87 C89 C96-98
C100-101 C104 C106-113 C115-116
C120 C124-125 C138 C151 C153-158
C26-27 C95 C52 C172 C174
+++++ 603010121 CAP CERAMIC SMD 1200pf/50V +10%-10% 0603 2.02000 C36 C47
+++++ 603010004 CAP CERAMIC SMD 100pf/50V +5% -5% 0603(NP0) SMD 34.34000 C41 C43 C53 C56 C59-82 C126 C160
C168-171
+++++ 603010044 CAP CERAMIC SMD 220pf/50V +5% -5% 0603(NPO) SMD 4.04000 C163 C165-167
+++++ 603010040 CAP CERAMIC SMD 22pf/50V +5% -5% 0603(COG) SMD 4.04000 C99 C102 C127-128
+++++ 603010088 CAP CERAMIC SMD 560pf/50V +5% -5% 0603(NPO) SMD 2.02000 C39 C45
+++++ 603010009 CAP CERAMIC SMD 0.001uf(1000pf)50V +10% -10% 0603 SMD 20.20000 C2-9 C23 C143-148 C150 C159 C161-
162 C173

+++++ 603010014 CAP CERAMIC SMD 0.01uf/50V +10% -10% 0603 SMD 5.05000 C175-179
+++++ 603010057 CAP CERAMIC SMD 0.22uf/50V +20% -20% 0603 17.17000 C1 C11-18 C21-22 C24 C28-29 C31-
32 C180
+++++ 603030004 CAP Tantalum SMD 10uf/10V +10% -10% B 3.5X2.8 9.04500 C30 C33-34 C37 C58 C88 C103 C105
C121
+++++ 603030003 CAP Tantalum SMD 10uf/10V +10% -10% A 3.2X1.6 1.00500 C49
+++++ 603020002 CAP ELECT SMD 10uf/16V+/-20% 4.5x3mmTAPE＆REEL RV2-16V 16.08000 C117-118 C122-123 C129-137 C140-
142
+++++ 603020007 CAP ELECT SMD 47uf/6.3V +/-20% 4*5MM 2.01000 C114 C139
+++++ 606010009 Ferrite Bead SMD 600R@100Mhz 0603 9.09000 L1-7 L9 L11
+++++ 606010005 Ferrite Bead SMD 2012D102B 0805 SMD 6.06000 L16-21
+++++ 606010006 Ferrite Bead SMD row SMBG3216K4-102 6.03000 AR38-39 AR9-11 AR17
+++++ 6050000100 Choking coil 100UH 520MA MURATA LQH66SN101M03L 1.00500 L27
+++++ 6010101130 IC SMD NJM4580 DUAL LOW NOISE SOP TYPE 2.00000 U3 U5
+++++ 6010104950 IC SMD DA PCM1781 24-Bit 192KHz Sampling Enhanced Multilevel 1.00000 U2
+++++ 6010102260 IC SMD S29GL064M90TFIR40 TSOP48 SPANSION 1.00000 U12
+++++ 6010106270 IC SMD S29AL008J70TF102 TSOP TYPE SPANSION 1.00000 U18
+++++ 6010103700 IC SMD SAM 2551 LQFP 120 TYPE 1.00000 U9
+++++ 6010100670 IC SMD IMP809TEUR 3.08V 3PIN S0T23 capsulation 1.00000 U17
+++++ 6010104220 IC SMD LM358 SOP TYPE 5.00000 U19-U23
+++++ 6010102320 IC SMD TDA1308T/N1 SOP TYPE PHI 1.00000 U8
+++++ 6010104930 IC SMD LM2576R-5 SWITCHER 3A Step-Down Vltage Regulator T0-263 1.00000 U15
+++++ 6010100750 IC SMD XC6203E332PR 3.3V SOT-89 TYPE TOREX 1.00000 U10
+++++ 6010104180 IC SMD MD2032 TQFP120 TYPE 1.00000 U11
+++++ 6010100150 IC SMD CS18LV02563AC-70 1.00000 U4
+++++ 6010100630 IC SMD CD4051 SOP TYPE 1.00000 U1
+++++ 6010100560 IC SMD 74HC00 SOP TYPE PHI 1.00000 U6
+++++ 6010100590 IC SMD 74HC74 SOP TYPE PHI 1.00000 U14
+++++ 6010105110 IC SMD 74HC244D IC BUFFER/LDRIVER OCT 3ST 20SOIC 1.00000 U16
+++++ 608010004 Switch Diode SMD IN4148 SOP TYPE SMD 22.11000 D10 D16 D18-D23 D25-D32 D34-36
D44-45 D42

+++++ 608040005 Schotthy Diode SMD LL5817 SCHOTTHY TYPE Cylindrical SMD 16.08000 D1-7 D9 D11-12 D15 D37-41
+++++ 608040001 Schotthy Diode SMD SS14 1A 40V 1.00500 D13
+++++ 608030002 Rectifier Diode SMD IN4001 6.00*3.00mm 2.01000 D14 D17
+++++ 609010006 Transistor SMD BC817-25L SOT-23 NPN 10.05000 Q3-4 Q11-14 Q1 Q5 Q7-8
+++++ 609010005 Transistor SMD BC807-25L SOT-23 NPN high frequency low power 4.02000 Q2 Q6 Q9-10
+++++ 610030017 Crystal SMD 49S 8.192MHZ HC-49S-SMD 1.00500 X3
+++++ 610030015 Crystal SMD 49S 9.6MHZ SMD-2 1.00500 X6
++++ 6280200100 Feminine Connector 25PIN(print square type Jack) 1.00000 J7
++++ 628010132 Masculine connector 8PIN/2.0mm single line straight feet 1.00000 J2
++++ 6280100630 Masculine connector 15Pins/2.00mm single line straight feet DIP 1.00000 J6
++++ 628010165 Masculine connector 5PIN/2.0mm vertical 1.00000 J1
++++ 628070796 Flat connector with cathode
plug in both sides 15Pin L=40mm UL1517 #28 With 15Pin PH to JC20-15 1.00000 J5
++++ 603080016 CAP ELECT DIP 1000uf/10V +20% -20% 8*16mm 1.00000 C119
++++ 603080013 CAP ELECT DIP 100uf/25V +20% -20% 6.3*11mm 1.00000 C92
++++ 603080033 CAP ELECT DIP 220uf/10V +20% -20% 6.3*11mm DIP 2.00000 C93-94
++++ 605000002 Coil TC623-30UH*2-F-03 DIP 1.00000 L24 L26
++++ 620010006 DC JACK 3Pin DS-210 DIP 1.00000 J4
++++ 620990005 LITHIUM BATTERY JACK 2Pin FOR CR-2032(00357-02001)DIP 1.00000 T1
++++ 620020004 STEREO JACK 5Pin ST-213 DIP 3.00000 JK1-3
++++ 621020004 Slide Switch SLIDE SW SK22F03-G7 slider 1.00000 S1
++++ 621020016 Slide switch SLIDE SWITCH MSK22D18-TG5 1.00000 S2
++++ 628140004 jump single flat cable 4mm 1.00000 2 to 3
++++ 628140011 jump single flat cable 8mm 1.00000 1 to 4
++++ 628110007 INSULOK CALBLE TIES 80mm 1.00000 FOR DC JACK
++++ 6280100680 Masculine connector 16Pins/2.00mm single line straight feet DIP 1.00000 J3
+++ 322050014 Support piece of module SPCC T=1.2mm stoving varnish 1.00000
++ 301110006 screw BB 2.6*12BB(D=3.0mm) black “+” PB 4.00000
++ 627030001 Battery of button type CR2032 3V no electrization 1.00000

++ 649001256 Sound source box IED12 A3A out size287*134*162mm(LWH) Module 1.00000
++ 650000460 mordule Cardboard A A3A 340mm*280mm 1.00000
++ 650000461 mordule Cardboard B A3A 450*128mm 1.00000
++ 643040023 Bubble bag size;270*240mm with hole 1.00000
+ 102150023 Long Cymbals pole ASSY IED07 1.00000
++ 631030063 Black Round Velvet Dia. 35*12MM no viscosity Black 1.00000
++ 313060003 Crystal short pole IED07-
XBOX black plated Φ10*180mm M8 1.00000
++ 313070036 Crystal long pole A IED07-
XBOX Steel tube chromeplate Φ19*590mm add two hole 1.00000
++ 303060003 Metal gasket inner Dia.6.5mm Thickness 1.5mm black Zn plating Steeliness
harden 1.00000
++ 302010032 Hexagon Nut Mild steel 1010 M6 T=4.8 Quencher 2.00000
++ 212010011 Cymbals lock pieces“B” DL-
1235 Nylon and fibre Injection Black N/A 1.00000
++ 212010012 Cymbals lock pieces“A” DL-
1235 Nylon and fibre Injection Black N/A 1.00000
++ 212010019 Butterfly nut DL-1236 ABS Injection Black N/A 1.00000
++ 212990002 Lock symbals
NUT（widening）ABS Black embedded metallic screw thread M8 1.00000
++ 301280001 Head slot circline “A” screw φ5*64.5mm metric PHH black plated 1.00000
++ 301110017 screw BB 3*12BB black Zn plating “+” PWB 2.00000
++ 301260004 Screw HM M6*15 nickelplate harden 1.00000
++ 212010022 Cymbals Support box DL-1324 Nylon and fibre Black N/A 1.00000
+ 102150022 Short Cymbals pole ASSY IED07 1.00000
++ 631030063 Black Round Velvet Dia. 35*12MM no viscosity Black 1.00000
++ 313060003 Crystal short pole IED07-
XBOX black plated Φ10*180mm M8 1.00000
++ 313070038 Crystal short pole A IED07-
XBOX Steel tube chromeplate Φ19*300mm add two hole 1.00000
++ 303060003 Metal gasket inner Dia.6.5mm Thickness 1.5mm black Zn plating Steeliness
harden 1.00000
++ 302010032 Hexagon Nut Mild steel 1010 M6 T=4.8 Quencher 2.00000

++ 212010011 Cymbals lock pieces“B” DL-
1235 Nylon and fibre Injection Black N/A 1.00000
++ 212010012 Cymbals lock pieces“A” DL-
1235 Nylon and fibre Injection Black N/A 1.00000
++ 212010019 Butterfly nut DL-1236 ABS Injection Black N/A 1.00000
++ 212990002 Lock symbals
NUT（widening）ABS Black embedded metallic screw thread M8 1.00000
++ 301280001 Head slot circline “A” screw φ5*64.5mm metric PHH black plated 1.00000
++ 301110017 screw BB 3*12BB black Zn plating “+” PWB 2.00000
++ 301260004 Screw HM M6*15 nickelplate harden 1.00000
++ 212010022 Cymbals Support box DL-1324 Nylon and fibre Black N/A 1.00000
+ 1021500420 Cymbals ASSY IED12 2.00000
++ 1011001130 Cymbals I/O board ASSY DD505 1.00000
+++ 501010201 PCB Single layer 94HB 1.6mm DD505 I/O PCB bonding pad with copper 1.00000
+++ 620020010 STEREO JACK 4PIN ST-015 PBT DIP 1.00000
+++ 628040190 Single connect wire L=80mm U/L #28 blue 1.00000
+++ 628040191 Single connect wire L=80mm U/L #28 red 1.00000
+++ 628110008 INSULOK CALBLE TIES 100mm 1.00000
++ 212010164 Cymbal body ABS black DL-1323 add pole for PCB 1.00000
++ 212010165 JacK house TPE hardness:90 shore a black DL-1324 1.00000
++ 301070007 screw PWB 3*8PWB black crisscross PWB 12.00000
++ 625000001 Piezo KD-27B-35EPGP 3.5KHZ 30nf 1.00000
++ 629990002 Sector Silica gel Cymbal side
RUB-0059 Black surface no disposal 1.00000
++ 629990006 Silica gel Cymbal location RUB
-
0060 Black surface no disposal 1.00000
++ 631020005 Black Velvet paper 20*35*0.2mm viscosity 1.00000
++ 633000002 Dual side paste φ28.0mm Round 1.00000
++ 633000012 Cymbal side 3M Dual side
Gummed paper DD505 281*162mm sector 1.00000
++ 643010026 Cymbal hairpin Polybag
DD602 PE 460*320*0.04mm print warning character 1.00000

++ 649001248 Cymbal box A3A Out size300*80*300(LWH)mm Print Cymbal 2pcs 0.50000
++ 650000293 Cymbal hairpin Cardboard
IED07-XBOX A3A 280*280mm 0.50000
+ 102170030 Pedal ASSY IED12 2.00000
++ 101060046 Pedal Switch board ASSY FIRSTACT 1.00000
+++ 621010024 PEDAL Switch KW9-3Z-01（22.1A）1.00000
+++ 628040023 Single connect wire L=140mm U/L 1007#20 black 1.00000
+++ 628040024 Single connect wire L=140mm U/L 1007#20 red 1.00000
+++ 620020010 STEREO JACK 4PIN ST-015 PBT DIP 1.00000
+++ 631990008 Insulation Heat－shrink pipe Dia. 4 Black 0.00450
++ 631040071 Force-rebounce Glue 92.5*50*2 Single layer with Rubber Black 1.00000
++ 630010021 Rubber feet φ17mm thickness 10.5mm black with suction 6.00000
++ 309990001 Spring thermolize black L=40mm DIA:1.8mm 1.00000
++ 303070008 Round Gasket MDD800 inner Dia.12mm outer Dia.18mm Thickness 0.5mm nickelplate Iron 1.00000
++ 302010017 Outer Hexagon Nut M11*1.25 φ17*4.5 PBT black 1.00000
++ 302010001 Hexagon Nut inner Dia.M3 Thickness2.3mm black hardening 2.00000
++ 302010015 Outer Hexagon Nut Thickness4mm M5 black 1.00000
++ 21201017701 Pedal panel material PA6 Injection black surface unprocessed modify tooling add
rid Φ3.2 alterΦ3.4 1.00000
++ 212010062 Pedal bottom board DL-1312 Nylon single 6 Injection Black N/A 1.00000
++ 301130014 screw BM 3*20BM black “+” 2.00000
++ 301260001 Screw HM M5*54 black machine made Round machine made 1.00000
++ 301060007 screw PWA 4*15PWA black crisscross PA 1.00000
++ 649001247 Pedal box A3A 395*155*130mm Print PLASTIC SWITCH PEDAL 0.50000
++ 650000458 Pedal cardboard A A3A 225*123mm 1.00000
++ 650000459 Pedal cardboard B A3A 390*123mm 0.50000
++ 643010008 Pedal Polybag DD602 PE 650*320*0.04mm print warning character 1.00000
++ 631040164 Force rebounce rubber 12*8*7(L*W*H) Single layer background rubber black 1.00000
+ 102130045 LDK6 4.00000

++ 101100088 Round drum tray I/O board
ASSY IED07-XBOX 1.00000
+++ 501010178 PCB Single layer 94HB 1.6mm DD502 round Drum trayI/O PCB V01 3*8 PCB 1.00000
+++ 620020010 STEREO JACK 4PIN ST-015 PBT DIP 1.00000
+++ 602040021 Resistor DIP 1M ohm(1/8w)+5%-5% 1.00000 R2
+++ 602040159 Resistor DIP 51K ohm(1/8w)+5%-5% 1.00000 R1
+++ 628040180 Single connect wire L=200mm U/L #28 blue not PVC sheach 1.00000
+++ 628040183 Single connect wire L=200mm U/L #28 red not PVC sheach 1.00000
++ 625000001 Piezo KD-27B-35EPGP 3.5KHZ 30nf 1.00000
++ 212990008 Round drum surface DL-1411 Material :TPE 35 degree(ET-3505) Black 1.00000
++ 631040109 EVA(Rubber Gasket) DIA193mm T=3.2mm no viscosity 1.00000
++ 631040061 Force-rebounce Glue 23*6*1mm dual layer viscosity Black 8.00000
++ 631020005 Black Velvet paper 20*35*0.2mm viscosity 2.00000
++ 631050152 Black sponge Donut dia;193mm dia;75mm T=10mm no sticky 1.00000
++ 313990001 Drum Supporting pole
DD502D black plated both end harden φ10*165mm 1.00000
++ 303060003 Metal gasket inner Dia.6.5mm Thickness 1.5mm black Zn plating Steeliness
harden 7.00000
++ 302010032 Hexagon Nut Mild steel 1010 M6 T=4.8 Quencher 7.00000
++ 212010093 Drum ring IED07-XBOX DL-
1494 HIPS Injection Black N/A 1.00000
++ 212010092 Drum bottom IED07-XBOX DL-
1495 HIPS Injection Black N/A 1.00000
++ 212010019 Butterfly nut DL-1236 ABS Injection Black N/A 1.00000
++ 322990006 Dentiform lock ring Short Handle 27mm Quencher ID10.5*OD25*7 1.00000
++ 301110015 screw BB 3*10BB “+” PWB plated Color Zn metric coarse dual teeth 2.00000
++ 633000002 Dual side paste φ28.0mm Round 1.00000
++ 901030002 Yellow Glue SONY SC121 180ML/bottle 0.36000
++ 322010014 Drum tray iron sheet MDD800 Electrolysis board T=1.0mm DIA=160mm 1.00000
++ 650000010 Drum tray Cardboard DD506 B=B 66.5*25.5cm 0.50000

++ 212010156 Colour ring of drum pad LDK6
DL-1496 ABS Injection Black N/A 1.00000
++ 642990049 Sensor PC PC Material DIA:110mm T=1mm no Silk print no viscosity 1.00000
++ 649000273 Drum Box DD505 A3A 26*26*16cm silk-print 2PCS Drum PADS 0.50000
++ 643030018 EPE 400*325*0.75mm along wide direction Opening 1.00000
++ 301260018 Screw HM M6*30 black Zn plating harden 6.00000
++ 904020028 Packing white paper A4(297*210mm) normal typing paper 1.00000
+ 102160017 Bracket ASSY IED07-XBOX 1.00000
++ 102370003 DD506 6.00000
+++ 302010032 Hexagon Nut Mild steel 1010 M6 T=4.8 Quencher 4.00000
+++ 212010044 Fixed Al pipe bundle buckle(2)
DL-1121 Nylon +fibre Black surface erode veins change mould to add hole 1.00000
+++ 212010045 Fixed Al pipe bundle buckle(1)
DL-1121 Nylon +fibre Black surface erode veins change mould to add hole 1.00000
+++ 301270004 Square head screw M6*25 black plated without slot machine made Round machine
made 3.00000
+++ 301270007 Square head screw M6*40 black plated without slot machine made Round machine
made 1.00000
++ 102370001 DD506 2.00000
+++ 309050003 Spring sheetA DD502
RD050189 ironware Electrolysis board stoving varnish black 1.00000
++++ 309010004 Spring sheet“A” DD502
RD050189 ironware Electrolysis board N/A 1.00000
+++ 303060003 Metal gasket inner Dia.6.5mm Thickness 1.5mm black Zn plating Steeliness
harden 1.00000
+++ 302010032 Hexagon Nut Mild steel 1010 M6 T=4.8 Quencher 1.00000
+++ 212010006 Lock DL-1234 ABS Injection Black N/A 1.00000
+++ 212010019 Butterfly nut DL-1236 ABS Injection Black N/A 1.00000
+++ 301280004 Head slot circline“D”screw φ5*82mm M6 Black 1.00000
+++ 301110010 screw BB 2.6*6BB black Zn plating “+” Dual teeth PWB 2.00000
++ 102370002 DD506 5.00000
+++ 309050004 bracket Spring sheet“B”
DD502 RD050190 ironware Electrolysis board stoving varnish black 1.00000

++++ 309010005 Spring sheet“B” DD502
RD050190 ironware Electrolysis board N/A 1.00000
+++ 302010032 Hexagon Nut Mild steel 1010 M6 T=4.8 Quencher 1.00000
+++ 212010006 Lock DL-1234 ABS Injection Black N/A 1.00000
+++ 212010019 Butterfly nut DL-1236 ABS Injection Black N/A 1.00000
+++ 301110010 screw BB 2.6*6BB black Zn plating “+” Dual teeth PWB 2.00000
+++ 322990005 Dentiform lock ring Long Handle 47mm Quencher ID10.5*OD25*7 1.00000
++ 314030015 Al tube IED07-XBOX Al black oxidation section gear shape L=700mm 2.00000
++ 314030008 Al tube DD602 Al black oxidation section gear shape L=350mm 2.00000
++ 314030009 Al tube DD602 Al black oxidation section gear shape L=500mm 1.00000
++ 212010018 Al pipe Endcap DL-1119 ABS Black N/A 4.00000
++ 314030021 Al tube IED07-XBOX Al black oxidation section gear shape L=450mm 2.00000
++ 212010094
Drum bracket bottom Feet
gasket IED07-XBOX DL-1408-
2
TPE 85 degree Black N/A 4.00000
++ 313990001 Drum Supporting pole
DD502D black plated both end harden φ10*165mm 1.00000
+ 6281300530 Drum connector 9PIN Wire Black 6.3mm Plug 1.00000
+ 638010059 SMPS Adaptor IN:100-240V AC 50/60Hz 0.6A MAX OUT: 9V 500mA UL Type 1.00000
+ 426010002 Drum stick N/A Yellow 5ADrum stick Φ15*404mm 2.00000
+ 322070011 Square socket spanner IED07-
XBOX Steel chromeplate lock Square bolt 1.00000
+ 643010098 Aluminium pipe Polybag PE 840*170*0.04mm with Ventilate pore Aluminium pipe 700mm
Polybag Printing R red 2.00000
+ 643010097 Aluminium pipe Polybag PE 670*170*0.04mm Aluminium pipe 450 Polybag Printing recycle
symbol with Ventilate pore 3.00000
+ 643010099 Aluminium pipe Polybag PE bag 480*170*0.04mm Aluminium pipe 350 Polybag Printing R
with Ventilate pore with recycle symbol red 1.00000
+ 650000288 Papercard A IED07-XBOX A=B 790*112mm veins and Length direction vertical 1.00000
+ 650000289 Papercard B IED07-XBOX A=B 330*282mm veins and Length direction vertical 2.00000
+ 650000290 Papercard C IED07-XBOX A3A 790*385mm Flat card 1.00000
+ 650000298 Aluminium pipe Cardboard
IED07-XBOX A3A 350*245MM 1.00000

+ 650000299 Cymbal hairpin Pole
Cardboard IED07-XBOX B3B 790*260mm 1.00000
+ 647000284 Gift BOX 300g Duplex board Coated K3A3 Inside size800*400*280mm Out
size815*410*300mm have ION 1.00000
+ 643010101 Aluminium pipe Polybag PEbag 840*170*0.04mm Aluminium pipe 700mm Polybag with
Ventilate pore Printing L 1.00000
+ 643010102 Aluminium pipe Polybag PEbag 480*170*0.04mm Aluminium pipe 350mm Polybag with
Ventilate pore Printing L recycle symbol 2.00000
+ 649000639 Al pipe Box IED07-Box A3A out size 160*90*372mm with print ARMS cymbal Short support 1.00000
+ 628110031 Cable Tie length 200mm nylon black 20.00000
+ 643010072 Bone closure Polybag PE 230*340*0.03mm no printing 1.00000
+ 650000300 Cardboard “D” IED07-XBOX materialA=B size : 520*112mm 3.00000
+ 641010418 Label White words on black have ION 1.00000
+ 639000677 Manual English ION 1.00000
+ 639000678 Setup manual English ION 1.00000
+ 628110007 INSULOK CALBLE TIES 80mm 1.00000
+ 643010071 Bone closure Polybag PE 128*128*0.03mm no printing 1.00000
+ 901010006 Stannum of cord solder wire Sn-0.5Ag-0.7Copper Dia. 1.0mm 0.00110
+ 301290015 Screw M4*16 length33.0mm surface nickel plate 2.00000
+ 641090002 Warning Label White grounding with red word English 63.5*45MM single layer
viscosity 2.00000
+ 649001394 Accessories A3A out size;260*95*160(LWH)mm Headphone 1.00000
+ 649001395 Connecting cable box A3A size:190*45*260(LWH)mm 1.00000

IED12 FUNCTION BOARD

v01

Su Wen Wu

2009-6-12

SHEET: OF

M E D E L I

B

1

1

REV:

SIZE:

CODE:

DRAWN:

DATED:

DATED:

CHECKED:

QUALITY CONTROL:

DATED:

DATED:

RELEASED:

COMPANY:

TITLE:

DRAWING NO:

SCALE:

REVISION RECORD

APPROVED:

ECO NO:

A

B

D

DATE:

1

2

3

4

5

6

D

C

A

B

C

LTR

PATTEN

VOICE

KIT

VOLUME

SAVE/REC

START/STOP

CLICK

DRUM OFF

TEMPO

+

-

RECORD

DRUM OFF

SNARE

TOM1

TOM2

TOM3

CRASH

RIDE

KICK

HI_HAT

HI_HAT_CTRL

VOLUME

CLICK RED

CLICK GREEN

D10

S1

S2

S3

S4

S5

S6

S13

S14

S15

S16

D17

D18

S12

D20

D19

D1

D2

D3

D4

D5

D6

D7

D8

D11

D12

D13

D14

8

S3

9

S2

12

S1

6

3

DOT

5

G

10

F

1

E

2

D

4

C

7

B

11

A

LED1

2

1

3

D15

CLICK

J3-1

J3-2

J3-3

J3-4

J3-5

J3-6

J3-7

J3-8

J3-9

J3-10

J3-11

J3-12

J3-13

J3-14

J3-15

J3-16

J4-1

J4-2

J4-3

J4-4

J4-5

J4-6

J4-7

J4-8
