3
CA200
4
CA200
IMPORTANT WARNINGS IMPORTANT WARNINGS
If the product is still making excessive
noise after cleaning and thoroughly drying
the collection blades and re-inserting
them as described in the “CLEANING &
MAINTENANCE” section of this manual,
turn off and unplug the unit. After you
have turned off and unplugged the
unit, see Diagram B or F for the location
of the Wire Cleaning Mechanism. Lift
and lower the Wire Cleaning Mechanism
three to four times to thoroughly clean
the internal ionizing wires (see Diagram
Hin the “CLEANING & MAINTENANCE”
section). This movement helps to scrape
free particles from the internal ionizing
wires. To keep your Ionic Pro® Compact
ionic air purifier working properly, it will
be necessary to clean the collection blades
after every month of use and the internal
ionizing wires after every two weeks of use
(see “CLEANING & MAINTENANCE” and
“DEEP CLEANING” section of this manual
for the proper techniques).
WARNING: After cleaning the
collection blades (see “CLEANING &
MAINTENANCE” section) with soap and
water, allow at least 24 hours for the
collection blades to dry thoroughly
before inserting them back into the unit.
Water can easily get trapped along the
collection blades’ many surfaces and
edges and damage could result if there
is any moisture on the collection blades.
You will need to clean your Ionic Pro®
Compact ionic air purier more often if it
has been exposed to heavy pollution.
MAIN PARTS
A. Collection Blades
B. Operating Panel
C. Outer Case Housing
D. AC Cord
E. Base
F. Wire Cleaning Mechanism
G. Removable Cap
IMPORTANT WARNINGS
Before using your Ionic Pro® Turbo air purifier,
please read all safety instructions and the following
important information.
Collection Blades
Please look at the “Main Parts” diagram and locate
the part labeled “A”.
These are the collection blades and are a vital part
of this amazing ionic air purifying system. The
collection blades are where unhealthy pollutants,
allergens, irritants and odors are trapped when the
Ionic Pro® Turbo Ionic Air Purifier air purifier is in
proper working condition and in use.
READ THIS: The metal collection blades may
contain a static charge. Do not touch the
metal collection blades, even when you take
the collection blade unit out for cleaning.
(See “CLEANING & MAINTENANCE” section
of this manual.)
The Ionic Pro® Compact ionic air purifier is designed
to run quietly and requires very little time and
effort to maintain in proper working condition. If
you hear excessive noise or static coming from your
Ionic Pro® Compact ionic air purifier, it generally
indicates that the product needs to be cleaned.
Turn off your Ionic Pro® Compact ionic air purifier,
unplug the cord and carefully follow the cleaning
instructions in the “CLEANING & MAINTENANCE”
section of this manual.
Do not place Ionic Pro® Compact ionic air purifier near a fireplace. Even if a fireplace is not in use,
chimney dust and soot may circulate through the Ionic Pro® Compact ionic air purifier and then
re-circulate and leave a residue on the unit and surrounding areas. We recommend not placing
the Ionic Pro® Compact ionic air purifier anywhere near candles or oil lamps. If you intend to use
candles or oil lamps near the Ionic Pro® Compact ionic air purifier despite this warning, make
sure that the wicks are cut to no more than a quarter inch to cut down on smoke production.
A.
Collection
Blades’
Handle
Wire Cleaning
Mechanism
Removable
Cap
B.
C.
D. E.
F.
G.
