Ionic Pro ELITE TA740 User manual

50032-03 / SKU 49301
TA74 0

TA740
Owner’ s
Manual

Thank you for purchasing
the Ionic Pro® Elite and
congratulations on taking this
important step in improving
the quality of air in your home,
oce and other environments.
Customer satisfaction is our
number one goal. Your Ionic Pro®
Elite is a premium air purifying
appliance which comes with a
limited one-year warranty.
Enjoy your Ionic Pro® Elite
and visit our website for
more exciting quality products
and upgrades.
www.envion.com

SAFETY INSTRUCTIONS 1
PRODUCT BENEFITS 3
MAIN PARTS 4
OPERATING THE IONIC PRO® ELITE AIR PURIFIER 5
Getting Ready 5
Controls/Settings 5
OPERATION 6
Selecting a Setting 6
CLEANING & MAINTENANCE 7
Clean Light 7
Preparing to Clean 8
Cleaning the Permanent Ionic Filter 9
Cleaning the Pre-Filter 10
Cleaning External Surfaces 11
TROUBLE-SHOOTING 12
ONE-YEAR LIMITED WARRANTY 13
ARBITRATION AGREEMENT 14
TABLE OF CONTENTS

1
EXTREMELY IMPORTANT INFORMATION: Safety precautions should always
be used when operating this or any electrical appliance. Decrease the risk of
electrocution, electric shock, injury or re by reading and following all the
warnings below:
• Use only as described in this Ionic Pro® Elite Owner’s Manual. To reduce the risk
of electric shock, do not attempt to service the product in any way other than
in the manner described in the “CLEANING & MAINTENANCE” section of this
manual.
• Do not use the Ionic Pro® Elite outdoors.
• Do not use the Ionic Pro® Elite in bathrooms or other humid environments, near
replaces or in areas where ammable or combustible vapors or products may
exist. Do not use near a sink, bath countertop or any other appliances that can
leak or splash water on the air purier.
• The Ionic Pro® Elite operates at 120v AC and 60Hz only.
• To reduce the risk of electric shock, this product has a grounding-type plug
that has a third grounding pin. This plug will t only into a grounding-type
power outlet. If the plug does not t into the outlet, contact qualied service
personnel to install the proper outlet. Do not alter the plug in any way.
• Always turn o all controls before unplugging the Ionic Pro® Elite
from outlet.
• Always turn o and unplug this product from outlet before removing or
inserting the electrostatic lter permanent ionic lter or pre-lter.
• Never touch the electrodes or any other internal part except the lters within
the Ionic Pro® Elite with your hand or with any object. Do not open the outer
casing of the Ionic Pro® Elite. Attempting to open the unit will cause the
warranty to be voided and could cause serious personal injury to the user and/
or result in considerable damage to the unit.
• Do not place the Ionic Pro® Elite cord near a heated surface.
• Never operate the Ionic Pro® Elite if the plug or cord is damaged or appears
damaged. Only qualied service personnel should ever replace or attempt to
replace a damaged power cord.
• Never use the power cord to pick up, carry, drag, pull, or lift the Ionic Pro® Elite.
Do not pull the cord against or around sharp corners and edges. This could
result in injury to the user and damage to the cord.
SAFETY INSTRUCTIONS

2
TA74 0
• Always remove the plug from its power outlet by holding onto the plug itself
and pulling gently. Never pull on the cord itself to unplug it from its power
outlet.
• Use care when operating the Ionic Pro® Elite by keeping all ngers, body parts,
hair, loose clothing and jewelry away from openings.
• Never touch the Ionic Pro® Elite or its plug with wet hands.
• The Ionic Pro® Elite is an electrical appliance. Ionic Pro® Elite should be
operated by adults only.
• After removing the permanent ionic lter from the unit, immediately discharge
residual electricity by touching blades to an electrical ground such as a water
pipe or metal faucet.
• The permanent ionic lter should be inspected frequently and cleaned
regularly to prevent excessive accumulation that may result in an electrical
ashover or risk of re.
• Always re-insert the permanent ionic lter and pre-lter in a vertical manner.
SAFETY INSTRUCTIONS

3
YOUR IONIC PRO® ELITE BOASTS:
• Ultra quiet operation.
• Ultra low power consumption.
• Compact tower design that sits on a table or oor.
• Permanent ionic lter never needs replacing and is dishwasher safe.
PRODUCT BENEFITS

4
TA74 0
Before using your Ionic Pro® Elite, please read all the information contained
in this manual.
A. PRE-FILTER
This lter traps large particles such as hair and lint.
B. PERMANENT IONIC FILTER
This is the permanent ionic lter. It’s a vital part of this amazing air purifying system.
This is where smoke, dust, allergens and irritants are trapped when the
Ionic Pro® Elite is in use.
C. PERMANENT IONIC FILTER HANDLE
D. AIR INLET GRILL
E. CONTROL PANEL
F. HANDLE FOR LIFTING/ MOVING
G. IONIZING CLEANING SWITCH See Figure 3
H. AIR OUTLET GRILL
MAIN PARTS
Figure 1 E
H
F
G
DCB
A

5
GETTING READY
Locate a level surface on which to place your Ionic Pro® Elite near a
grounded 120v outlet. Position your Ionic Pro® Elite at least one foot from
the wall. Follow warnings described in the “SAFETY INSTRUCTIONS” section
of this manual.
Plug in the unit. You are now ready to turn on your Ionic Pro® Elite!
CONTROLS/SETTINGS
MODE BUTTON
SILENT
Lowest speed setting. Silent operation.
GERM
Medium speed. Quiet operation.
ALLERGY
High speed.
MAX
Highest speed.
CLEAN FILTER
This blue light goes on when the Ionic Pro® Elite needs to be cleaned, or the unit
is experiencing some other problem. See the “CLEANING & MAINTENANCE” and
the “TROUBLE-SHOOTING”sections of this manual for more information.
NOTE: It is recommended to clean the permanent ionic lter every 8 weeks.
ON/OFF BUTTON
Turns the unit on and o and controls the fan speed.
OPERATING THE ELITE
Control Panel
Figure 2

6
TA74 0
SELECTING A SETTING
Set up the Ionic Pro® Elite as described in the“GETTING READY” section of this
manual. Push the ON/OFF button to activate the Ionic Pro® Elite.
Select the desired fan speed by pushing the MODE button.
Push the button to cycle through the settings. The LED indicators will light up to
indicate your current setting.
OPERATION

7
CLEAN FILTER LIGHT
If the unit has not been regularly cleaned and an excessive
amount of dirt has collected on the permanent ionic lter,
the unit will shut down and the blue light will turn on. This
light will turn on every 8 weeks to remind you to clean the
lter. Simply clean the permanent ionic lter by following
the “CLEANING & MAINTENANCE”section of this manual
and when complete, press the ON/OFF and MODE buttons
together to reset.
CLEANING THE IONIZER
For maximum performance we recommend that you clean
the ionizer each time you clean the Permanent Ionic Filter.
Locate the Ionizing cleaning switch on the front grill of the
Ionic Pro® Elite. See Figure 3.
Push the rod towards the center of the grill. The rod will
move about 0.5 inch forward before it will come to a stop.
Release the rod. Repeat this 2 to 3 times.
CLEANING & MAINTENANCE
If you hear excessive noise or static coming from your Ionic
Pro® Elite it generally indicates that the product needs to be cleaned. Turn o your
Ionic Pro® Elite, unplug the cord and carefully follow the cleaning instructions in
the “CLEANING & MAINTENANCE”section of this manual.
Keep the Ionic Pro® Elite functioning properly by cleaning the permanent ionic
lter and pre-lter after every 8 weeks of use as recommended. More frequent
cleaning will be necessary if the unit is located in an area with a high level of
airborne contaminants (excessive amounts of smoke, pet dander, etc.).
Exposing the Ionic Pro® Elite to candle, oil lamp, replace soot, and smoke is not
recommended and will require the collection blade assembly and pre-lter to be
cleaned more frequently.
HELPFUL TIP: If your unit doesn’t work and the CLEAN FILTER light is on,
it’s time to clean the lters.
CLEANING AND MAINTENANCE
Figure 3

8
TA74 0
PREPARING TO CLEAN:
1. Turn o and unplug your Ionic Pro® Elite and let it rest for 60 seconds.
2. Remove the permanent ionic lter by taking hold of the handle
and lifting upwards. See Figure 4.
3. After removing the permanent ionic lter from the unit, immediately discharge
residual electricity by touching blades to an electrical ground such as a water
pipe or metal faucet.
4. Remove the pre-lter from the ESP cell. See Figure 7.
CLEANING AND MAINTENANCE
Figure 4

9
CLEANING THE PERMANENT IONIC FILTER:
DISHWASHER
1. Put the permanent ionic lter into the dishwasher— making sure not to damage
or bend the blades.
2. Remove from dishwasher at the end of the cleaning cycle.
3. VERY IMPORTANT: Ensure that the permanent ionic lter is thoroughly dry
before installing it into the purier and resuming use.
4. Always make sure your air purier is turned o and unplugged before attempting
to vertically re-insert the permanent ionic lter.
HANDWASH
1. Place the permanent ionic lter into warm, soapy water and let stand for
approximately 10 minutes. See Figure 5.
2. Remove from water and rinse with warm water. Repeat as necessary. If your lter
is excessively dirty, you can use a soft bristle brush to clean the blades. Make sure
not to damage or bend the blades. See Figure 6.
3. You may use a household degreaser for severe smoke or grease build up on the
permanent ionic lter. Please follow the instructions for the household degreaser.
4. VERY IMPORTANT: Wait until the permanent ionic lter is thoroughly dry before
re-inserting it into the purier and resuming use.
5. Always maker sure your air purier is turned o and unplugged before attempting
to vertically re-insert the collection blade assembly and pre-lter.
NOTE: If you insert a wet part, the fan will not turn on and the CLEAN FILTER light
will go on. Simply take out the part and let it dry.
Figure 5 Figure 6
CLEANING AND MAINTENANCE

10
TA74 0
CLEANING THE PRE-FILTER:
NOTE: The pre-lter is attached to the back side of the permanent ionic lter.
See Figure 7.
1. When in use, the pre-lter removes larger particles from the air circulating
through your Ionic Pro® Elite.
2. It can either be hand-washed in cold water or vacuumed.
3. However you clean it, make sure it is absolutley dry before attempting to
vertically re-insert it into your air purier and resuming use.
4. Always make sure your air purier is turned o and unplugged before
attempting to vertically re-insert the permanent ionic lter or pre-lter.
IMPORTANT DRYING WARNING
To avoid damaging your air purier, make sure the permanent ionic lter and
pre-lter are completely dry and free of all moisture before attempting to vertically
re-insert them into your air purier and resuming use.
NOTE: If you insert a wet part, the fan will not turn on and the CLEAN FILTER light
will go on. Simply take out the part and let it dry.
Always make sure your air purier is turned o and unplugged before attempting to
vertically re-insert the permanent ionic lter and pre-lter.
CLEANING AND MAINTENANCE
Figure 7

11
CLEANING EXTERNAL SURFACES
Over time, some particles and dust may accumulate on the external surfaces
of your Ionic Pro® Elite.
TO CLEAN EXTERNAL SURFACES:
1. Turn o and unplug the unit.
2. Use a moist washcloth with a little dishwashing soap to
wipe the outer case surfaces.
3. Do not allow water to slip into the internal parts of the air purier as this
could damage its functioning and may result in injury to you.
4. Allow the unit to dry thoroughly before resuming use.
CLEANING AND MAINTENANCE

12
TA74 0
TROUBLESHOOTING
PROBLEM REASON SOLUTION
Unit will not
turn on
Machine is unplugged.
Unit has not been
turned on.
Permanent ionic lter
and pre-lter are not
completely inserted.
Check if plug is loose.
Push control button.
Check to see that the
permanent ionic lter and
per-lter are completely
seated in the housing.
Blue CLEAN FILTER
light is on
Fan is o
Too much dust has
accumulated.
Permanent ionic lter
is wet.
Turn o, unplug and
clean using instructions
from the “CLEANING &
MAINTENANCE” section.
Excessive noise Too much dust has
accumulated or internal
parts are wet.
Clean and dry the permanent
ionic lter and pre-lter
thoroughly. Keep the machine
dry.

13
ONE YEAR LIMITED WARRANTY
Your Ionic Pro® Elite air purier is warranted to be free from defects in materials
and workmanship for one year from the original purchase date. Should the
product have a defect in materials or workmanship, we will repair or replace
it without charge to you (a shipping and processing fee will apply). To obtain
service under warranty, simply call our customer service center toll-free at
800.875.8577.
This warranty does not cover damage caused by accident, misuse or any use
other than as intended and described in this product manual, or damage
resulting from failure to maintain and clean this product as specied in this
product manual. This warranty applies only to the original purchaser of the
Ionic Pro® Elite air purier.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL
APPLY AFTER THIS PERIOD.
Some states do not allow limitations on the duration of implied warranties, so
the above limitation may not apply to you. While this warranty gives you specic
legal rights, you may also have other rights which may vary from state to state.
CONTACT INFO FOR WARRANTY SERVICE:
Ionic Pro® by BONECO North America Corp.
P.O. Box 9169 | Van Nuys, CA | 91409
800.875.8577 | www.envion.com
©2020 BONECO North America Corp. All Rights Reserved.
Patent D773,028.
WARRANTY

14
TA74 0
PLEASE READ THIS AGREEMENT CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT
BY RETAINING THE PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE
“PRODUCTS”) FOR MORE THAN THIRTY (30) DAYS AFTER RECEIPT. IF YOU DO NOT AGREE TO THE
TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO COMPANY WITHIN THIRTY
(30) DAYS OF RECEIPT FOR A FULL REFUND.
THIS ARBITRATION AGREEMENT (“AGREEMENT”) AFFECTS YOUR LEGAL RIGHTS AND REMEDIES
BY PROVIDING THAT DISPUTES BETWEEN YOU AND THE MANUFACTURER, DISTRIBUTOR AND/OR
SELLER OF THIS PRODUCT (COLLECTIVELY, “COMPANY”), MUST BE RESOLVED THROUGH BINDING
ARBITRATION AND NOT IN COURT. IT ALSO PROVIDES THAT ANY DISPUTE CANNOT BE RESOLVED
IN A CLASS ACTION OR OTHER PROCEEDING WHERE YOU REPRESENT OTHER PERSONS OR OTHER
PERSONS REPRESENT YOU, AND THAT NO CLASS OR REPRESENTATIVE ARBITRATIONS ARE
PERMITTED. PLEASE CAREFULLY READ ALL TERMS IN THIS AGREEMENT.
1. RESOLUTION OF CLAIMS OR DISPUTES. Any claim or dispute between you and Company (or
any of Company’s subsidiaries or aliates) arising out of or relating in any way to the Product or
this Agreement shall be resolved through nal, binding arbitration. This arbitration obligation is
reciprocally binding on both you and the Company and applies regardless of whether the claim
or dispute involves a tort, fraud, misrepresentation, product liability, negligence, violation of a
statute, or any other legal theory. Both you and Company specically acknowledge and agree that
you waive your right to bring a lawsuit based on such claims or disputes and to have such lawsuit
resolved by a judge or jury.
2. LIMITATION OF LEGAL REMEDIES. All arbitrations under this Agreement shall be conducted on an
individual (and not a class-wide) basis, and an arbitrator shall have no authority to award class-wide
relief. You acknowledge and agree that this Agreement specically prohibits you and the Company
from commencing arbitration proceedings as a representative of others or joining in any arbitration
proceedings brought by any other person. The parties agree that no class or representative actions
of any type are permitted.
3. ARBITRATION PROCEDURES.
a. Before instituting an arbitration, if you have any dispute, we strongly encourage you to contact
the Company to try to resolve the matter by calling 800.875.8577, although you are not required
to do so.
b. The arbitration of any claim or dispute under this Agreement shall be conducted in accordance with
the expedited procedures set forth in the JAMS Comprehensive Arbitration Rules and Procedures
as those Rules exist on the date you receive the Product, including Rules 16.1 and 16.2 of those
Rules. These rules and procedures are available by calling JAMS or by visiting its web site at www.
jamsadr.com. The arbitration of any claim or dispute under this Agreement shall be conducted by an
arbitrator who has at least ve years of experience conducting arbitrations.
c. The arbitration of any claim or dispute under this Agreement shall be conducted in the State
of California or the location in which you received this Agreement. For claims of $10,000 or less,
you may choose whether the arbitration proceeds in person, by telephone, or based only on
submissions.
d. The Company shall pay costs for the arbitration of claims, including any JAMS Case Management Fee
and all professional fees for the arbitrator’s services. The Company shall pay the fees and costs of its
own counsel, experts and witnesses and shall not be able to recoup them from you even if you do
not prevail in the arbitration. Unless otherwise provided by law, you acknowledge and agree that
you shall pay the fees and costs of your own counsel, experts and witnesses.
4. CHOICE OF LAW. The arbitration provisions of this Agreement and any arbitration conducted
pursuant to the terms of this Agreement shall be governed by the Federal Arbitration Act (9 U.S.C.
Secs. 1-16). In this respect, the parties acknowledge that this Agreement involves a transaction
conducted in interstate commerce. Otherwise, this Agreement and the rights of the parties
hereunder shall be governed by and construed in accordance with the laws of the State of
California, exclusive of conict or choice of law rules.
5. SEVERABILITY. If any provision of this Agreement is declared or found to be unlawful,
unenforceable or void, such provision will be ineective only to the extent that it is found unlawful,
unenforceable or void, and the remainder of the provision and all other provisions shall remain fully
enforceable.
ARBITRATION AGREEMENT

15

16
TA74 0