IP Wireless 1C User manual

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 1
IPWireless Broadband Modem
1C User Guide
Version 1.0
Feb 18, 2003

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 2
Information in this document and the products described are subject to change without notice.
© 2000-2003 IPWireless, Inc. All rights reserved.
Reproduction, alteration, or distribution in any manner whatsoever without the written permission of
IPWireless Inc., is strictly forbidden.
Trademarks used in this text: the IPWireless logo, icon, and IPWireless Broadband Modem are
trademarks of IPWireless, Inc.; Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. IPWireless, Inc., disclaims any proprietary interest in
trademarks and trade names other than its own.
Feb 2003 Part No. IPW-0392

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 3
Table of Contents
Introduction ............................................................................................................................................6
Technical Support.....................................................................................................................................6
Chapter 1 – Safety and Care Instructions ..............................................................................................7
Safety Guidelines for Power Connection....................................................................................................7
Safety Guidelines for the IPWireless Broadband Modem ...........................................................................7
Exposure to Radio Frequency Signals........................................................................................................8
Care and Cleaning Guidelines....................................................................................................................8
Chapter 2 - Getting Started ..................................................................................................................10
Required Equipment................................................................................................................................10
Package Contents....................................................................................................................................11
Computer Interface Cable........................................................................................................................11
AC Power Adapter..................................................................................................................................11
Installation CD........................................................................................................................................11
External Stand.........................................................................................................................................11
Other Informational Material...................................................................................................................11
Key Areas on Your IPWireless Broadband Modem..................................................................................12
Chapter 3 – Installation and Registration ............................................................................................14
Support the IPWireless Broadband Modem Using the Built-in Stand........................................................14
Support the IPWireless Broadband Modem Using the External Stand.......................................................15
Connect the AC Power Adapter...............................................................................................................16
Find the Best Radio Signal......................................................................................................................16
Install the IPWireless PC Software ..........................................................................................................18
Connect Cable between the Modem and the Computer.............................................................................18
USB Cable Connection............................................................................................................................19
Ethernet Cable Connection......................................................................................................................19
Perform Registration...............................................................................................................................19
Windows Operating System Patches........................................................................................................21
Windows Internet Configuration Setting..................................................................................................21
Chapter 4 – Connect to the Internet.....................................................................................................22
Establishing the Connection to the Internet..............................................................................................24
Appendix A – Troubleshooting Tips.....................................................................................................26
Troubleshooting Tips ..............................................................................................................................26
THE POWER BUTTON IS ON BUT THE DISPLAY DOES NOT ILLUMINATE .........................................................26
NO SIGNAL RING INDICATORS ARE ILLUMINATED ON THE IPWIRELESS BROADBAND MODEM DISPLAY .......26

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 4
ONLY ONE OR TWO SIGNAL STRENGTH RINGS ARE ILLUMINATED................................................................27
THE IPWIRELESS BROADBAND MODEM DISPLAY IS NOT FUNCTIONING AS EXPECTED .................................27
THE IPWIRELESS BROADBAND MODEM DISCONNECTS UNEXPECTEDLY .....................................................27
THE IPWIRELESS BROADBAND MODEM SPEED IS NOT FAST ENOUGH .........................................................27
CONNECTED MODEM BEFORE INSTALLING THE IPWIRELESS PC SOFTWARE...............................................28
DRIVER INSTALLATION FAILS DUE TO “DIGITAL SIGNATURE NOT FOUND”...................................................28
REGISTRATION FAILS BECAUSE THE PC DOES NOT ACCEPT “COOKIES”.......................................................29
THE BROWSER DID NOT GO DIRECTLY TO THE REGISTRATION SCREEN ........................................................29
THE CONNECT AND DISCONNECT BUTTONS ARE NOT HIGHLIGHTED ON THE STATUS MONITOR SCREEN BUT A
RADIO SIGNAL IS PRESENT ........................................................................................................................29
ERROR MESSAGE “INVALID PASSWORD” ..................................................................................................29
ERROR MESSAGE “NO ANSWER”..............................................................................................................29
IPWIRELESS BROADBAND MODEM NOT RESPONDING...............................................................................30
Appendix B – Battery Information.......................................................................................................31
Internal Battery.......................................................................................................................................31
Battery Safety Guidelines........................................................................................................................31
Appendix C – Frequently Asked Questions..........................................................................................32
Appendix D – Modem Display Warnings.............................................................................................35
Power-On Self Test Failure.....................................................................................................................36
Software Upgrade Warning.....................................................................................................................36
Attach Dialer Indication ..........................................................................................................................37
USIM Failure Indication..........................................................................................................................38
Appendix E – [Technical Specifications] ..............................................................................................39
Appendix F – [PPPoE Routers Tested].................................................................................................41
Appendix G – [PPPoE Clients Tested]..................................................................................................41
Regulatory Information ........................................................................................................................42
North America and Canada......................................................................................................................42
Europe....................................................................................................................................................42
Statements of Conformity........................................................................................................................42

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 5
This page has intentionally been left blank

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 6
Introduction
Congratulations on your selection of the IPWireless Broadband Modem. Your IPWireless
Broadband Modem is designed to give you exceptional performance combined with easy
installation and operation. Please read all safety and care instructions in Chapter 1
before installing your IPWireless Broadband Modem for the first time.
The IPWireless Broadband Modem is a portable, wireless, cellular device that provides
high-speed access to the Internet and offers high-bandwidth data downloads, uploads,
and web browsing when connected to networks authorized for use with the IPWireless
Broadband Modem.
The design of the IPWireless Broadband Modem is based on the standards of the latest
third generation cellular communication technology, commonly known as 3G technology.
The IPWireless Broadband Modem doesn’t require an outdoor antenna, telephone jack,
or additional home or office wiring. What's more, the IPWireless Broadband Modem
connects to the Internet through radio access -- you will never encounter dial-up busy
signals or need to install an extra line to access the Internet and use the telephone at the
same time.
The speed at which your IPWireless Broadband Modem will perform is dependent upon
the radio signal quality available and the IPWireless service level that you select.
Information on how to determine and boost the signal quality is located in Chapter 3. Of
course, your IPWireless Broadband Modem can only connect to systems authorized for
use with IPWireless equipment. Service is not available in all areas; consult your Internet
Service Provider (ISP) for details.
The IPWireless Broadband Modem is USB (Universal Serial Bus) compatible. USB is a
“plug and play” interface between a computer and an add-on device, such as a modem
or printer, eliminating the need to add an adapter card. The USB also provides a trickle
charge to the internal battery of the IPWireless Broadband Modem.
Technical Support
This User Guide provides you with step-by-step instructions on how to install and use
your IPWireless Broadband modem. However, if you need further assistance, please
contact your Service Provider for Technical Support.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 7
Chapter 1 – Safety and Care Instructions
Before using your IPWireless Broadband Modem for the first time, please read and
follow all warnings, safety, care, cleaning, and operating instructions on the IPWireless
Broadband Modem label and in this guide. These guidelines will help protect your
IPWireless Broadband Modem from potential damage and ensure your personal safety.
Safety Guidelines for Power Connection
Danger - Do not place or use the IPWireless Broadband Modem near any body of water
such as a bathtub. Accidental immersion can result in electric shock.
Danger - Never alter the AC adapter or plug. If the plug will not fit into the electrical outlet
without force, contact a qualified electrician to install a proper outlet.
Connect the AC adapter to 120V or 240V electrical outlets only.
To disconnect the unit from mains power, remove the AC adapter from the wall socket.
To reduce the risk of damage, always remove each end of the power cable by pulling the
plug rather than the cable.
Do not allow anything to rest on the power cable.
Do not position the power cable in any area where people will step on it.
Do not use the IPWireless Broadband Modem if the power cable becomes frayed or
damaged in any way.
Do not overload the power outlet. Power overloads are often caused by too many
electrical devices connected by extension cords and can result in electric shock or fire.
See Appendix B for important safety information about the internal battery.
Safety Guidelines for the IPWireless Broadband Modem
Do not attempt to disassemble the IPWireless Broadband Modem; doing so may expose
you to unsafe conditions. The IPWireless Broadband Modem does not contain consumer
serviceable components. Service should be performed by the IPWireless Service Center
only. Contact IPWireless Customer Service to find the nearest IPWireless Service
Center.
Position the IPWireless Broadband Modem so that it is protected from falling objects.
Do not allow liquids to spill on or into the IPWireless Broadband Modem.
Do not expose the IPWireless Broadband Modem to extreme hot (over 131° F/+55°C) or
cold (under 14° F/-10°C) temperatures.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 8
Do not leave the IPWireless Broadband Modem in a motor vehicle parked in direct
sunlight for more than fifteen minutes.
Do not expose the IPWireless Broadband Modem to open flames.
Do not alter the antenna or substitute any other antenna. Doing so may be unsafe.
Switch your IPWireless Broadband Modem off when near medical equipment, fuel,
chemicals, a potentially explosive atmosphere such as a gasoline station, or when in an
area in which blasting is in progress. Also, switch it off when on an aircraft. Follow any
other rules, regulations, or posted notices that apply to the use of electronic or radio
equipment.
Before using the IPWireless Broadband Modem near a pacemaker or similar device,
consult a physician or the device manufacturer for more information. In any event, do
not use the IPWireless Broadband Modem within 8" (20 cm) of a pacemaker or similar
device.
Do not use the IPWireless Broadband Modem when you need to pay attention to other
activities. For example, never use it while driving or while supervising or operating
machinery.
The IPWireless Broadband Modem, like any other wireless communications device,
cannot guarantee a connection in all circumstances. Do not rely on it for matters where
a connection is essential.
Exposure to Radio Frequency Signals
The following information includes important safety guidelines regarding exposure to
radio frequency (RF) signals and the use of electronic devices as determined by the
Federal Communications Commission (FCC).
Before using your modem, please read the RF label that is attached to the outside of the
modem. This label identifies the minimum separation distance between the modem
antenna and the user or any other person when the modem is in use. Do not use the
modem when the antenna is closer to anyone than the specified distance.
Your modem is a low power radio transmitter and receiver. When it is ON, it receives
and also sends out RF signals. The FCC has adopted RF exposure guidelines with
safety levels for wireless cellular devices. The FCC guidelines are consistent with the
safety standards previously set by the U.S. and international standards bodies:
American National Standards Institute - ANSI C95.1 (1992); National Council on
Radiation and Measurements - NCRP Report 86 (1986); International Commission on
Non-Ionizing Radiation Protection - ICNIRP (1996). If you use the modem in
accordance with these guidelines, the level of RF exposure will fall within the FCC
guidelines and the standards previously identified.
Care and Cleaning Guidelines
Use a soft, clean cloth slightly moistened with water and wipe the outside surface of the
IPWireless Broadband Modem only.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 9
Do not use aerosol sprays, solvents, or abrasives when cleaning your IPWireless
Broadband Modem. These items may scratch the surface or damage the interior
components of the IPWireless Broadband Modem.
To avoid the risk of electric shock, always unplug the IPWireless Broadband Modem
from the AC power outlet before cleaning it.
Avoid dropping, shaking or striking the IPWireless Broadband Modem. This may
damage its components.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 10
Chapter 2 - Getting Started
Required Equipment
To install and use your IPWireless Broadband Modem, you will need the following
configuration:
4Computer:
§IBC Compatible PC
§Pentium-class II processor or greater (300 MHz or higher
recommended)
4Operating Systems Supported
§Microsoft Windows 98 (SE2),
§Microsoft Windows ME,
§Microsoft Windows 2000 (Administrative privileges required)
§Microsoft Windows XP Home (Administrative privileges required)
§Microsoft Windows XP Professional (Administrative privileges
required)
4Memory
§Minimum 64 megabytes (MB) of RAM (128 MB recommended)
4Connector
§USB port, or
§Ethernet port
4Display:
§VGA or Super VGA (recommended) monitor with the following
settings:
§Screen resolution set to at least 800 ?600
4Free disk space required:
§20 megabytes (MB) free in the target directory (minimum)
§40 megabytes (MB) for future software upgrades

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 11
Package Contents
In addition to this User Guide, the following items are included in the IPWireless
Broadband Modem package:
Computer Interface Cable
A USB computer interface cable is included with your IPWireless Broadband Modem.
Use this cable to connect the IPWireless Broadband Modem to your computer. If
needed, refer to your computer manual for the location of a USB port.
If you have ordered a modem with a LAN connection then an Ethernet cable will also be
included in the pack.
AC Power Adapter
The AC power adapter provides power to the IPWireless Broadband Modem. The power
adapter plugs into a 120V or 240V AC power outlet. The pin end of the power cable
plugs into the power jack located on the side of the IPWireless Broadband Modem. Do
not use any power adapter other than the one provided with your IPWireless Broadband
Modem.
Installation CD
The installation CD includes the IPWireless PC Software and an HTMLHelp version of
this guide.
External Stand
The external stand is used when the IPWireless Broadband Modem is used in a desktop
installation.
Other Informational Material
Your IPWireless Broadband Modem packaging may contain additional informational
material pertaining to the use or care of the IPWireless Broadband Modem within your
service area. Please review all such information carefully before using the IPWireless
Broadband Modem.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 12
Key Areas on Your IPWireless Broadband Modem
Figure 1 below identifies key areas on the IPWireless Broadband Modem. Please review
this information before you begin the installation.
Figure 1
uPower On/Off (1 Red LED)
The single red LED at the top-right of the IPWireless Broadband Modem display indicate
that the modem is ON.
vConnection Status Indicator (1 Green LED)
The single Green LED shows the connection status. The green LED will be illuminated
when you are connected to the Internet.
wTransmit and Receive Indicator (2 Amber LEDs)
x
Power Button
w
Transmit & Receive
Indicator
(2 Amber LEDs)
{
Built-in Stand
y
Signal Strength
Indicator (4 Yellow LEDs)
|
PC Interface Cable
Connection
z
DC Power
Jack
}
Antenna
(Vertical position)
v
Connection Status
Indicator
(
1
Green LED
)
u
Power On/Off
(1 RED LED)

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 13
The LEDs show data transmit (Tx) and receive (Rx) activity. The LEDs will flicker
when data is transferring.
xPower Button
Press the power button for one second to turn the modem on. The red LED of the
will illuminate when the unit is ON.
ySignal Strength (4 Yellow LEDs)
The 4 yellow LEDs on the left of the disply indicate the radio signal strength. When only
the bottom yellow LED is illuminated, you have minimum signal strength required to
transmit and receive data. Each subsequent LED indicates increasing signal strength.
When all 4 LEDs are illuminated, you can transfer data at the maximim speed of the
IPWireless Broadband Modem, or at the service level you have selected.
zDC Power Jack
The pin end of the power cable plugs into the DC power jack located on the side of the
IPWireless Broadband Modem.
{Built-in Stand
The built-in stand on the back of the unit supports the IPWireless Broadband
Modem.
|PC Interface Cable Connection
The 20-pin connector on the USB or Ethernet cable plugs into the PC port on the side of
the modem.
}Antenna
Raise the antenna to its vertical position to connect the PC Interface Cable. When the
antenna is vertical, it receives signals equally in all directions. Place the antenna in the
vertical position (as shown in Figure 1) when the IPWireless Broadband Modem is in
use, and in the down position (adjacent to the body of the IPWireless Broadband
Modem) when not in use. Do not force the antenna beyond its vertical position.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 14
Chapter 3 – Installation and Registration
This chapter explains how to install the software, register your user information, and
operate your IPWireless Broadband Modem. The instructions explain how to:
ØSupport the IPWireless Broadband Modem using the built-in stand
ØSupport the IPWireless Broadband Modem using the external stand
ØConnect the AC Power Adapter
ØFind the Best Radio Signal
ØInstall the IPWireless PC Software
ØConnect the Cable between the Modem and the Computer
ØPerform On-line Registration
Support the IPWireless Broadband Modem Using the Built-in Stand
On the lower back panel of the IPWireless Broadband Modem is a removable
battery cover, which incorporates a stand that supports the IPWireless Broadband
Modem. Complete the following steps to support the IPWireless Broadband Modem
using the built-in stand:
1. Insert your index finger into the slot at the top of the battery cover.
2. Gently pull the stand toward you until it locks in position. See Figure 2
below. See also closing of stand below.
3. Set the IPWireless Broadband Modem on a flat surface, such as a desk or
windowsill, but avoid direct sunlight.
Figure 2

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 15
4. The stand is closed by sliding it a small distance to the right. Refer to the
direction arrows on the inside of the stand, then rotate closed (see figure 3)
IPWireless Broadband Modem User Guide 16
Connect the AC Power Adapter
1. Plug the pin end of the power cable into the DC power jack located on the
side of the IPWireless Broadband Modem as shown in Figure 4 below.
Figure 4
Note: Before connecting your IPWireless Broadband Modem to a power source
in the next step, you may want to consider using a power surge protector. A
surge protector is designed to protect electronic devices from electrical surges
and lightning strikes that may damage your computer or modem. If you don’t
have a surge protector, contact your local computer or electronics retailer for
further details.
2. Plug the AC power adapter into a 120V or 240V AC power outlet.
3. To disconnect the unit from mains power, remove the mains adapter from
the wall socket.
Find the Best Radio Signal
1. Place the IPWireless Broadband Modem near your computer and press the
power button for one second to turn it on.
2. Your IPWireless Broadband Modem will perform a short self-test that will
last for approximately five seconds. The IPWireless Broadband Modem will
search for the best radio signal and then display the signal strength on the
left side of the modem display.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 17
3. When the self-test is complete, the power on LED will illuminate. If this
indicator flashs on and off, there may be a problem with the IPWireless
Broadband Modem. Call your Service Provider for Technical Support. Note:
The display will dim after two minutes to conserve battery life -- this is
normal. A momentary press of the power button will restore the brightness of
the display.
4. The IPWireless Broadband Modem will ‘search’ for a base station, in a
manner similar to a cellular phone. Whilst the modem is searching, the two
LEDs marked Tx and Rx on the right hand of the will illuminate alternatively.
5. Observe the four signal indicators (LEDs) on the left hand side of the
IPWireless Broadband Modem display to help you determine when the
IPWireless Broadband Modem has located a radio signal. Adjust the position
of the IPWireless Broadband Modem until the center ring is illuminated. This
is similar to moving an FM radio to receive the best sound quality. When the
bottom yellow LED is illuminated, you have the minimum signal strength
required to transmit and receive data. Each subsequent LED indicates
increasing signal strength. When all four LEDs are illuminated, you can
transfer data at the maximum speed of the IPWireless Broadband Modem,
or at the service level you selected. See Figure 5, below.
Figure 5
3. Continue to adjust the position of the IPWireless Broadband Modem to
achieve the strongest radio signal possible from your location. Tip: Placing
the IPWireless Broadband Modem near a window can boost the signal
strength.
Signal Strength

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 18
4. If only one or two signal strength indicators illuminate, refer to the
troubleshooting section in Appendix A.
5. You are now ready to install the IPWireless PC Software. Note: Install the
IPWireless PC Software before connecting the Computer Interface Cable.
Install the IPWireless PC Software
The IPWireless PC Software employs an InstallShield Wizard that will guide you through
the installation process. You will be asked to make selections on some of the installation
screens.
Please be sure that your computer meets the minimum requirements before you begin
the installation.
1. Close all programs that may be running on your PC and then insert the CD into
the CD-ROM drive on your computer. The Windows operating system should
detect the CD and start the installation program. If the installation program does
not start automatically, open Windows Explorer or My Computer and select your
CD drive to view the contents of the CD. Double-click the ‘Setup.exe’ program
to begin the installation. The InstallShield Wizard will now guide you through the
installation screens described on the following pages. Follow the on-screen
prompts to complete the installation.
2. License Agreement Screen - The use of the IPWireless Broadband Modem is
subject to acceptance of the License Agreement. Scroll through the display
window to read the entire agreement. The installation of the IPWireless PC
Software will proceed only if you accept the License Agreement. If you want a
printed version of the License Agreement, use the Print function on your
browser before you click the ‘Accept’ button. Click ‘Accept’ to continue.
3. Copying Files Screen - All installation options have now been made and the
InstallShield Wizard will copy the necessary files to your computer.
4. Installing the Modem Driver Files. The installation will now copy the
necessary modem driver files to your computer, so that the PC will detect the
IPWireless Broadband Modem when you connect the computer interface cable.
A number of information/warning boxes will be displayed, indicating the
progress of the modem driver installation. The final information box will prompt
you to connect the computer interface cable to the IPWireless Broadband
Modem and your computer.
Connect Cable between the Modem and the Computer
There are three possible cable connections supported by the IPWireless Broadband
Modem; USB or LAN/Ethernet.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 19
USB Cable Connection
If you are connecting via a USB cable, your computer operating system should
detect that new hardware has been added and automatically plug and play the
modem device. The plug and play function adds the IPWireless Broadband Modem
to your PC and may take approximately 1 minute to complete. During this time, a
number of plug and play messages will display confirming that new hardware has
been found and that the software for the IPWireless Broadband Modem is being
detected. After the plug and play is finished, click the ‘OK’ button and connect the
USB Cable.
1. Plug the 20-pin connector on the USB cable into the PC port on the side of
the modem as shown in Figure 8 below.
2. Connect the other end of the USB cable into a USB port on your computer. If
needed, refer to your computer manual for the location of the USB port.
Figure 8
Ethernet Cable Connection
Before connecting your 3G Modem to your network via the Ethernet connection,
registration should be performed via USB as described in the section below.
Perform Registration
You are now ready to register your user information. Please note: You can complete
the registration process at a later time; however User Registration is not optional.
You must register in order to create a username and password, register your account
and payment information, and receive software and modem upgrades.

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 20
The registration process takes place on-line using an internet browser that must already
be installed on your computer. Typically, the browser might be Microsoft Internet
Explorer or Netscape Navigator.
The only requirements are that you have a default browser installation, and that your
browser is capable of accepting ‘cookies’. If you have disabled cookies, you need to
enable them before registration. If you wish, you may disable receipt of cookies after
registration. See Frequently Asked Questions (FAQs) in Appendix C for instructions on
how to set cookie preferences on your browser.
1. To Continue with Registration Now - Make sure that there is a checkbox is
selected to the left of Connect To The Internet and then click ‘Next >’.
2. The IPWireless 3G Modem Dialler application will then automatically start. The
application will communicate with the IPWireless 3G Modem and after a short
delay (23-30 seconds) it will attempt to establish a wireless internet connection.
The default Internet browser will be automatically launched and will automatically
display your Service Providers Customer Registration web page.
Note: If a connection cannot be made, the IPWireless PC Software will
timeout and display a message indicating that the connection failed. If this
happens, see the Troubleshooting Tips in Appendix A.
3. To create a new account via your Service Providers Customer Registration
web page follow the on-screen instructions.
4. When you have created a new account, close the Internet Browser session
(Click the Windows close icon (x) in the upper right corner of the screen to
close the browser software).
5. Upon closing the Internet Browser session, the IPWireless 3G Modem
Dialler application will then automatically disconnect the wireless internet
connection. The IPWireless 3G Modem Dialler application will then attempt
to read the cookies returned from the Service Providers registration server
to the PC. There will be a short delay of about10 seconds, after which the
IPWireless 3G Modem Dialler application will indicate if the registration has
been successful before the application automatically closes.
6. Click Finish to exit the installation program.
7. You are now ready to connect to the Internet.
Once the registration has completed the Installation Wizard will finish. The software
should now be installed with your computer having the following entries listed from the
Start->Programs menu bar.
Programs IPWireless Software IPWireless 3G Modem Dialler
IPWireless Help System
IPWireless Home Web page
IPWireless Registration Web page
IPWireless User Guide

PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
IPWireless Broadband Modem User Guide 21
Windows Operating System Patches
The IPWireless Broadband Modem can work at high data speeds, to achieve these rates
may require a Windows Operating System patch to be applied. The installation software
will determine if any operating system patch is required and it is recommended that the
windows operating system patch is applied if required.
At the end of the Windows Operating System patch installation, a window will be
displayed stating that the computer needs to be rebooted for the patch to take effect.
Since the IPWireless Broadband Modem will work with your original settings (at a slower
rate), it is advised that you do not reboot here but continue with the rest of the
installation.
Windows Internet Configuration Setting
Again, due to the high data speeds that the IPWireless Broadband Modem can work at,
in order to achieve these rates will require that some TCP/IP settings are modified to
take full advantage of this high rate.
These settings will only be used by the operating system the next time the computer is
rebooted.
At the very end of the IPWireless PC Software installation it is advised that you reboot
the computer so that the changes applied to the computer during the installation can
take effect.