Huawei HG658 User manual

Huawei VDSL2 modem
Quick install guide

Before you begin
Please check you have received the following items.
Huawei VDSL2
home gateway HG658
Power Supply RJ-45 yellow
Ethernet cable
RJ-11 grey
DSL cable
Modem location
The modem must be plugged into the left port of the
Wall socket located within your lounge room. Currently
this is the only port in the unit activated for TransACT
broadband service. Below is an example of the socket to
look for.
Phone location
The telephone handset can be plugged into the left
hand port of any other socket within the unit.

Modem Setup
1. Connect the power cable from the wall socket to the power port in the modem.
Once connected press the on/off button on the side panel to power on the modem.
2. Connect the grey DSL cable, one end into the left port of the wall socket in the
lounge and the other end connected to the marked DSL socket on the modem.
3. Connect the yellow Ethernet cable to the yellow LAN2 port on the modem with the other
end connecting to your Laptop/PC.

Connecting your new modem to your account
Once your modem is plugged in and turned on, you’ll need to activate your data usage
by calling your Internet Service Provider (ISP). If you’re a Grapevine customer, call
13 35 00 and select option 1.
Your billing will begin automatically the day after the modem arrives.
Any questions you have can be directed to our friendly Technical Support Team on
13 30 61 (option 5).
Please note: a wireless connection is not provided with this modem. A wireless router
can be purchased at any good electronics store.