IPC Eagle 315P Guide

Wet/Dry Vacuums
Polyethylene, Polypropylene, & Steel
Operations and Parts Manual
Models:
315P
415P
429P
430P
415S
415ST
415PLT

2

3
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precauti n must always be f ll wed, including the f ll wing:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
This machine is f r c mmercial use.
WARNING
WARNINGWARNING
WARNING
DANGER:
DANGER: DANGER:
DANGER: Failure t read and bserve all DANGER statements c uld result in severe b dily injury
r death. Read and bserve all DANGER statements f und in y ur Owner’s Manual and n y ur
machine.
WARNING:
WARNING: WARNING:
WARNING: Failure t read and bserve all WARNING statements c uld result in injury t y u r t
ther pers nnel; pr perty damage c uld ccur as well. Read and bserve all WARNING statements
f und in y ur Owner’s Manual and n y ur machine.
CAUTION:
CAUTION: CAUTION:
CAUTION: Failure t read and bserve all CAUTION statements c uld result in damage t the
machine r t ther pr perty. Read and bserve all CAUTION statements f und in y ur Owner’s
Manual and y ur machine.
DANGER:
DANGER: DANGER:
DANGER: Failure t read the Owner’s Manual pri r t perating r attempting any service r
maintenance pr cedure t y ur machine c uld result in injury t y u r t ther pers nnel; damage t
the machine r t ther pr perty c uld result as well. Y u must have training in the perati n f this
machine bef re using it. If y u r y ur perat r(s) cann t read English, have this manual explained
fully bef re attempting t perate this machine.
DANGER:
DANGER: DANGER:
DANGER: Operating a machine that is n t c mpletely r fully assembled c uld result in injury r
pr perty damage. D n t perate this machine until it is c mpletely assembled. Inspect the machine
carefully bef re perati n. Use nly as described in this manual. Use nly the manufacturer’s
rec mmended attachments.
DANGER:
DANGER: DANGER:
DANGER: Machines can cause an expl si n when perated near flammable materials and vap rs.
D n t use this machine with r near fuels, grain dust, s lvents, thinners, r ther flammable
materials.
DANGER:
DANGER: DANGER:
DANGER: D n t
D n t D n t
D n t pick up flammable fluids, dust r vap rs.
DANGER:
DANGER: DANGER:
DANGER: D n t
D n t D n t
D n t vacuum anything that is burning r sm king, such as cigarettes, matches, r h t
ashes.
DANGER:
DANGER: DANGER:
DANGER: This machine is n t
is n t is n t
is n t suitable f r picking up health endangering dust.
DANGER:
DANGER: DANGER:
DANGER: Using a machine with a damaged p wer c rd c uld result in an electr cuti n. D n t use
the machine if the p wer c rd is damaged. D n t use the electrical c rd t m ve the machine. Keep
c rd away fr m heated surfaces. D n t unplug by pulling n the c rd; grasp the plug, n t the c rd.
Turn ff all c ntr ls bef re unplugging. D n t cl se a d r n c rd r pull ar und sharp edges r
c rners.
DANGER:
DANGER: DANGER:
DANGER: Electr cuti n c uld ccur if maintenance and repairs are perf rmed n a unit that is n t
pr perly disc nnected fr m the p wer s urce. Disc nnect the p wer supply bef re attempting any
maintenance r service.

4
Warning:
Warning: Warning:
Warning: Operating a machine with ut bserving all labels, decals, etc., c uld result in injury r
damage. Read all machine labels bef re attempting t perate the machine. Make sure all f the
labels are attached r fastened t the machine. Get replacement labels and decals fr m the
manufacturer’s distribut r.
Warning:
Warning: Warning:
Warning: Electrical c mp nents can “sh rt- ut” if exp sed t water r m isture. Keep the electrical
c mp nents f the machine dry. Always st re the machine in a dry area.
Warning:
Warning: Warning:
Warning: Use f this machine t m ve ther bjects r t climb n c uld result in injury t the pera-
t r r damage t the machine. D n t use this machine as a step r furniture. D n t all w t be used
as a t y. Cl se attenti n is necessary when used by r near children.
Warning:
Warning: Warning:
Warning: M ving parts f this machine can cause injury and/ r damage. Keep hands, feet, l se
cl thing, hair, fingers, and all parts f the b dy away fr m penings and m ving parts.
Warning:
Warning: Warning:
Warning: Electr cuti n c uld ccur if y u handle the plug r appliance with wet hands. D n t handle
plug r appliance with wet hands.
Warning:
Warning: Warning:
Warning: D n t use with ut dust bag and r filters in place.
Warning:
Warning: Warning:
Warning: R tating fan blades inside the c ver. Bef re pening c ver, switch ff machine. Wait until
the fan/brush st ps c mpletely r dust and debris may be ejected.
Warning:
Warning: Warning:
Warning: If the machine is n t w rking pr perly, has been dr pped, damaged, left utd rs, r
dr pped int water, return it t an Auth rized service center.
Warning:
Warning: Warning:
Warning: Damage c uld ccur t machine if penings are bl cked. D n t put any bject int
penings. D n t use any pening bl cked: keep free f dust, lint, hair, and anything that may reduce
air fl w.
Warning:
Warning: Warning:
Warning: Injury c uld ccur t the perat r r the machine if used with ut the dust bag and/ r filters
in place. D n t use the machine with ut the dust bag and/ r filters in place.
Warning:
Warning: Warning:
Warning: Injury t the perat r and/ r damage t the machine c uld ccur when cleaning n stairs,
unless cauti n is used. Use extreme cauti n when cleaning n stairs.
Warning:
Warning: Warning:
Warning: T reduce the risk f electrical sh ck, always use a 3-wire electrical system c nnected t
the electrical gr und. Whenever p ssible c nnect the machine t an utlet pr tected by a gr und fault
interrupter (GFCI). See “Gr unding Instructi ns.”
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS

5
120 V lt Machine Instructi ns F r
120 V lt Machine Instructi ns F r 120 V lt Machine Instructi ns F r
120 V lt Machine Instructi ns F r
C nnecti n T The P wer Supply And The
C nnecti n T The P wer Supply And The C nnecti n T The P wer Supply And The
C nnecti n T The P wer Supply And The
Electrical Gr und
Electrical Gr undElectrical Gr und
Electrical Gr und
This machine must be c nnected t the electrical gr und
t pr tect the perat r fr m electrical sh ck. The machine
has an appr ved p wer c rd with three c nduct rs and a
plug with three terminals. C nnect the plug t a recepta-
cle that has three h les and is c nnected t the electrical
gr und. The green ( r green and yell w) c nduct r in the
c rd is the gr und wire. Never c nnect this wire t any
terminal ther than the gr und terminal.
This machine uses a 120 v lt AC 60 cycle electrical
circuit. Make sure y u have the c rrect frequency and
v ltage bef re c nnecting the p wer c rd t an utlet.
The machine has a plug as sh wn in Figure 1. If a recep-
tacle c nnected t the electrical gr und as sh wn in Fig-
ure 1 is n t available, have ne installed by an electrical
c ntract r. D n t use an adapter.
D n t use an adapter.D n t use an adapter.
D n t use an adapter.
Warning:
Warning: Warning:
Warning: T reduce the risk f electrical sh ck, pr tect the machine fr m rain. Keep the machine in
a dry area.
Warning:
Warning: Warning:
Warning: T reduce the risk f electrical sh ck, always use a 3-wire electrical system c nnected t
the electrical gr und. Whenever p ssible c nnect the machine t an utlet pr tected by a gr und fault
interrupter (GFCI).
Warning:
Warning: Warning:
Warning: D n t cut, rem ve r break the gr und pin. If the utlet d es n t fit the plug, c nsult y ur
electrical c ntract r.
Warning:
Warning: Warning:
Warning: Have w rn, cut r damaged c rds and plugs replaced by an auth rized service pers n.
Warning:
Warning: Warning:
Warning: If it bec mes necessary t use an extensi n c rd t reach an electrical utlet, y u must
use ne that is at least ne size larger in wire size. Such as a p wer c rd that is marked 12/3 w uld
need t use an extensi n c rd that is marked 10/3. D n t use an extensi n c rd that is undersized.

6
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONSIMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
• Bef re use, the equipment must be c rrectly assembled with all f its c mp nents
• Check that the electrical utlet is c rrect f r use with the plug n the machine
• Bef re c nnecting, check that the specified m t r v ltage c rresp nds t the main
v ltage available
• Never use the equipment near flammable, expl sive r t xic substances: sparks fr m
the m t r c uld cause danger us reacti ns.
• Always unplug the machine fr m the electrical utlet when leaving machine unattend-
ed r bef re attempting any repair.
• Service and repair sh uld be d ne by qualified pers nnel nly. Use nly riginal
manufacturer’s replacement parts.
Operati n
Operati nOperati n
Operati n
This machine is a c mmercial vacuum designed f r wet r dry pick up. And must be st red
This machine is a c mmercial vacuum designed f r wet r dry pick up. And must be st red This machine is a c mmercial vacuum designed f r wet r dry pick up. And must be st red
This machine is a c mmercial vacuum designed f r wet r dry pick up. And must be st red
in a dry l cati n.
in a dry l cati n.in a dry l cati n.
in a dry l cati n.
• Machines with dual r triple vac m t rs can be run t gether r independently as the
j b requires.
• Dry s il can be vacuumed directly int the tank r int a disp sable paper bag fitted
nt the vacuum inlet.
• F r wet pick-up, rem ve p lyester filter. The machine is equipped with a shut- ff fl at.
As the tank is filled t capacity, a fl at rises and seals the vac intake, causing a l ss f
vacuum. Switch ff the vacuum when this happens and bring the machine t a drain.
• T empty the machine, either use the drain h se m unted n the back f the tank, r
rem ve the m t r head assembly and tilt the tank backwards n tipping m dels, r lift
and dump ut the c ntents f smaller units.
• With b th wet and dry applicati ns be sure t frequently clean the filter. This is
especially true when the vacuum is being used with strippers and fl r finish.
After Use
After UseAfter Use
After Use
1 . St re the c rd n the h k.
2. St re the appliance ind rs, away fr m s urces f heat.
3. This appliance is pr vided with an aut matically reset
thermal limiter t av id damage t m t r. If thermal limiter
perates d ne r m re f the f ll wing:
• Change the bag
• Clean r replace the cartridge filter
• Check h se and tank inlet f r any bstructi ns
• Wait a few minutes f r the thermal limiter t re-cl se the circuit

7
Peri dic Maintenance
Peri dic MaintenancePeri dic Maintenance
Peri dic Maintenance
(Every six t twelve m nths)
(Every six t twelve m nths)(Every six t twelve m nths)
(Every six t twelve m nths)
1. Check filter f r wear, replace dirt saturated filters that d
n t resp nd t n rmal cleaning.
2. Inspect gasket seals and replace th se which have begun t
leak.
3. Examine carb n m t r brushes and c mmutat r.
Servicing The Filter
Servicing The FilterServicing The Filter
Servicing The Filter
The filter is accessed by lifting the head assembly ff the tank.
The P lyester filter assembly is easily rem ved by simply lifting the filter basket ut f the tank.
The cartridge filters they are rem ved very easily. First rem ve the filter retainer by turning the black kn b 90
degrees c unter-cl ckwise. The cartridge filter will then slide ff f the supp rt assembly.
N te:
N te:N te:
N te:
• Be sure t frequently clean the filters.
• All w filters t th r ughly air dry after washing them bef re returning them t the machine.
• W rn filters can affect vacuum perf rmance. Replace the filters when they bec me w rn ut and n rmal
cleaning will n t rest re vacuum perf rmance.
Servicing The Vac M t r
Servicing The Vac M t rServicing The Vac M t r
Servicing The Vac M t r
M t r Replacement
M t r ReplacementM t r Replacement
M t r Replacement
1. Disc nnect p wer c rd fr m p wer s urce.
2. T access the vac m t r, rem ve the screws that attach the main c ver t the head assembly and set the
c ver t ne side.
3. Disc nnect the m t r’s 2 red lead wires fr m the main wiring bridge.
4. Disc nnect green/yell w wire by rem ving the screw fr m the m t r c re.
5. Rem ve the f ur m t r m unting screws.
6. Rem ve m t r plate and set aside.
7. Take ut the m t r and rem ve the upper and l wer gaskets.
8. Inspect gaskets. If they sh w signs f wear replace the.
9. Install gaskets nt new m t r ensuring that they are pr perly seated.
10. Install the new m t r. Make sure f am mufflers are p siti ned pr perly.
11. Attach m t r plate t m t r.
12. C nnect green/yell w wire t m t r c re.
13. C nnect m t r’s 2 red lead wires t main wiring bridge.
14. Re-assemble vac c ver.
15. Test f r pr per perati n.
S8053200

8
Servicing The Vac M t r
Servicing The Vac M t rServicing The Vac M t r
Servicing The Vac M t r
Carb n Brush Replacement
Carb n Brush ReplacementCarb n Brush Replacement
Carb n Brush Replacement
(Replacement Carb n Brushes: Part# S8053200)
1. Disc nnect p wer c rd fr m p wer s urce.
2. T access the vac m t r, rem ve the screws that attach the main c ver t the head
assembly and set the c ver t ne side.
3. Rem ve the screws that attach the inner c ver t the head assembly and set aside.
4. Rem ve the carb n brush assembly by rem ving the 2 screws that attach it t the vac
m t r. See Figure 1
5. Slide ff the carb n brush c nnect r fr m the m t r terminal. See Figure 2
6. Inspect armature c mmuat r. If it is extremely pitted, gr ved r n t c ncentric then
the m t r will need t be replaced r sent t a qualified service center.
7. Reverse steps 6 thr ugh 4 t install new carb n brush and h using.
8. Repeat steps 4 thr ugh 7 f r the ther carb n brush.
9. Reverse steps 3 and 2 f r re-assembly.
10. Test f r pr per perati n.
Figure 1 Figure 2

9
315 Vacuum Motor Assembly
No. Part # Description Qty.
1 S 1122 Power Cord 1
2 S 013 Strain Relief 1
3 S 0139 Clamp, Cord 1
4 S 1006 Screw 5x20 2
5 S 3444 Terminal Block 1
6 S 292 AUG6 Cord Hook 1
7 S 2627 Screw 5x40 1
S 2927G6 Handle 1
9 S 1026 Screw 5x30 1
10 S 1006 Screw 5x20 2
11 S 1054 Screw 5x50 2
12 S 1026 Screw 5x30 2
13 S 2929AUG6 Cover, Single Motor 315 1
14 S 0326 Switch 1
15 S 3937 Filter 1
16 S 1050 Screw 5x35 6
17 S 273 -1AUVE1 Cover, Motor 1
1 S 3969 Gasket 1
19 S 3900 Filter 1
21 S 2627 Screw 5x40 6
22 S 1006 Screw 5x20 4
23 S 2591-1AUG6 Motor Retainer 1
24 S 3901 Gasket 1
25 S 1120S Motor 1000watt 120V 1
26 S 3901 Gasket 1
27 S 3 66 Disk, Noise Reduction 1
2 S 11 9GG6 Base, with Gasket 1
Filter Assembly 315
No. Part# Description Qty.
1 S 3706 Bushing 4
2 S 3724 Screw 5x25 4
3 S 2143NE Body, Float 1
5 S 0507 Ring, Filter 1
6 S 2 60 Filter Bag 1
7 S 2 59 Support, Filter Bag 1

10
No. Part # Description Qty.
1 S 1122 Power Cord 16x3 1
2 S 013 Strain Relief 1
3 S 0139 Clamp, Cord 1
4 S 1006 Screw, 5x20 2
5 S 2931AUG6 Cord Hook 1
6 S 1054 Screw 5x30 4
7 S 2930G6 Handle 1
S 1026 Screw 5x25 1
9 S 1006 Screw 5x20 2
10 S 1005 Screw 5x14 2
11 S 3436 Terminal Block 1
12 S 1054 Screw 5x30 4
13 S 2932AUG6 Cover, Single Motor 1
14 S 1006 Screw 5x20 2
15 S 0326 Switch 1
16 S 3937 Filter 1
17 S 3273 Screw 5x35 9
1 S 1502 Grommet 1
19 S 33 3AU Cap 2
20 S 2957AUVEI Cover, Motor 1
21 S 2627 Screw 5x25 9
22 S 2627 Screw 5x25 3
23 S 2937AUG6 Motor Retainer 1
24 S 1004 Screw 4.5x20 1
25 S 3433 Terminal Board 1
26 S 3969 Gasket 1
27 S 1006 Screw 5x20 4
29 S 3901 Gasket 1
30 S 1120S Motor 1000watt 120V 1
31 S 3901 Gasket 1
32 S 1006 Screw 5x20
33 S 3901 Gasket 2
34 S 3451AU Plug 2
35 S 3454 Filter 3
36 S 3456 Filter 3
37 S 3519 Cap 2
3 S 310 G6 Base with Gasket 1
15 Vacuum Motor Assembly
Filter Assembly 15
No. Part # Description Qty.
1 S 3706 Bushing 4
2 S 3724 Screw 5x25 4
3 S 21243NE Body Filter Assembly 1
5 S 2676-1G Float w/Gasket 1
6 S 0473 Filter Ring 1
7 S 2 45 Filter Bag 1
S 2 33-1 Filter Support 1

11
No. Part # Description Qty.
1 T 2102005 Power Cord 14x3 1
2 S 013 Strain Relief 1
3 S 0139 Clamp, Cord 1
4 S 1006 Screw, 5x20 2
5 S 2931AUG6 Cord Hook 1
6 S 1054 Screw 5x30 4
7 S 2930G6 Handle 1
S 1026 Screw 5x25 1
9 S 1006 Screw 5x20 2
10 S 1005 Screw 5x14 2
11 S 3436 Terminal Block 1
12 S 1054 Screw 5x30 4
13 S 2963AUG6 Cover, Dual Motor 1
14 S 1006 Screw 5x20 2
15 S 0326 Switch 2
16 S 3937 Filter 2
17 S 3273 Screw 5x35 9
1 S 1502 Grommet 1
19 S 33 3AU Cap 2
20 S 2957AUVEI Cover, Motor 1
21 S 2627 Screw 5x25 9
22 S 2627 Screw 5x25 3
23 S 2937AUG6 Motor Retainer 1
24 S 1004 Screw 4.5x20 1
25 S 3433 Terminal Board 1
26 S 3969 Gasket 2
27 S 1006 Screw 5x20
29 S 3901 Gasket 2
30 S 1120S Motor 1000watt 120V 2
31 S 3901 Gasket 2
32 S 1006 Screw 5x20 4
33 S 3901 Gasket 1
34 S 3451AU Plug 1
35 S 3454 Filter 3
36 S 3456 Filter 3
37 S 3519 Cap 2
3 S 310 G6 Base with Gasket 1
29 Vacuum Motor Assembly
Filter Assembly 29
No. Part # Description Qty.
1 S 3706 Bushing 4
2 S 3724 Screw 5x25 4
3 S 21243NE Body Filter Assembly 1
5 S 2676-1G Float w/Gasket 1
6 S 0473 Filter Ring 1
7 S 2 45 Filter Bag 1
S 2 33-1 Filter Support 1

12
No. Part # Description Qty.
1 T 0070 Power Cord 12x3 1
2 S 20 1 Strain Relief 1
3 S 0139 Clamp, Cord 1
4 S 1006 Screw, 5x20 2
5 S 2931AUG6 Cord Hook 1
6 S 1054 Screw 5x30 4
7 S 2930G6 Handle 1
S 1026 Screw 5x25 1
9 S 1006 Screw 5x20 2
10 S 1005 Screw 5x14 2
11 S 3436 Terminal Block 1
12 S 1054 Screw 5x30 4
13 S 2963AUG6 Cover, Dual Motor 1
14 S 1006 Screw 5x20 2
15 S 0326 Switch 3
16 S 3937 Filter 3
17 S 3273 Screw 5x35 9
1 S 1502 Grommet 1
19 N/A N/A
20 S 2957AUVEI Cover, Motor 1
21 S 2627 Screw 5x25 9
22 S 2627 Screw 5x25 3
23 S 2937AUG6 Motor Retainer 1
24 S 1004 Screw 4.5x20 1
25 S 3433 Terminal Board 1
26 S 3969 Gasket 3
27 S 1006 Screw 5x20 12
29 S 3901 Gasket 3
30 S 1119S Motor 00watt 120V 3
31 S 3901 Gasket 3
32 N/A N/A
33 N/A N/A
34 N/A
35 S 3454 Filter 3
36 S 3456 Filter 3
37 S 046 Valve 3
3 S 310 G6 Base with Gasket 1
30 Vacuum Motor Assembly
Filter Assembly 30
No. Part # Description Qty.
1 S 3706 Bushing 4
2 S 3724 Screw 5x25 4
3 S 21243NE Body Filter Assembly 1
5 S 2676-1G Float w/Gasket 1
6 S 0473 Filter Ring 1
7 S 2 45 Filter Bag 1
S 2 33-1 Filter Support 1

13
Tank Assembly 315P
No. Part# Description Qty.
S 266 Complete Tank Assy. 1
1 S 2599 Tank, Black 1
2 S 1300 Rivet 4
3 S 1 47 Clamp 2
4 S 1050 Screw 5x35 4
5 S 2 46 Gasket 1
6 S 25 6G6 Retainer 1
7 S 2593 Deflector 1
S 2652AG6VE Inlet Cover 1
9 S 055 Caster 6

14
Tank and Cart Assembly 15P, 29P, 30P
No. Part# Description Qty.
1 S 255 Handle 1
2 S 2637NE Tank, Poly 24g Black 1
3 S 1026 Screw 5x30 4
4 S 25 4G6 Retainer, Tank 1
5 S 2 46 Gasket 1
6 S 2593 Deflector 1
6a S 2767 Deflector (430P) 1
7 S 2652AG6VE Inlet Cover w/button 1
7a S 2762AG6VE Inlet Cover w/button (430P) 1
S 1300 Rivet 4
9 S 1 47 Latch 2
10 S 1050 Screw
11 S 2974 Washer, Plastic
12 S 1072-1NE Support, Handle Front 2
13 S 1 60-1NE Support, Handle Rear 2
14 S 1302NE Rivet 4. x17 2
15 S 2559 Caster, Swivel 2
16 S 26 0 Screw
17 S 2556 Support, Axle 2
No. Part# Description Qty.
1 S 0904 Wheel, Rear 2
19 S 2557 Retainer, Wheel 2
20 S 3 35NE Cap, Wheel 2
21 S 2607 Spacer, wheel 2
22 S 1006 Screw
23 S 2555 Axle 1
24 S 0 34 Nut, 1.25” 1
25 S 0256 Gasket 1
26 S 2763 Elbow, Drain 1
27 S 3592 Clamp 1
2 S 2765 Hose, Drain 1
29 S 3156 Screw 1
30 S 27 Clamp 1
31 S 2 12 Retainer, Drain Plug1
32 S 2764 Drain Plug 1
33 S 6250 Handle Grip 2

15
Tank Assembly 15ST
No. Part# Description Qty.
1 S 2993 Handle 2
2 S 1 47 Clamp, Tank 2
3 S 1302 Rivet 5x19 4
4 S 3629 Screw 5x25 4
5 S 3 3 Washer 4
6 S 3253 Tank-Steel 1
7 S 1026 Screw 5x30 4
S 25 6 Adapter, Tank 1
9 S 2 46 Gasket 1
10 S 2593 Deflector 1
11 S 25 3 Adapter, Hose 1
12 S 2594 Button 1
13 S 260 Spring 1
14 S 2993 Handle 1
15 S 2974 Washer 2
16 S 3629 Screw 5x25 2
17 S 3156 Screw 5x25 4
1 S 3 3 Washer 4
19 S 296 Hook, Tank 1
20 S 2970 Swivel 2
21 S 2969 Knob, Release 2

16
Cart Assembly 15ST
No. Part# Description Qty.
1 S 3250 Cart 1
2 S 0976 Plug 2
3 S 2557 Cap, End 2
4 S 0904 Wheel 2
5 S 3 35 Cap 2
6 S 1012 Washer 2
7 S 047 Nut 2
S 0479 Caster, Swivel 2
9 S 1979 Screw 5x25 4
10 S 3450 Clip Pad 4
11 S 6250 Hand Grip 2

17
Tank Assembly 15S
No. Part# Description Qty.
1 S 2993 Handle 2
2 S 1 47 Clamp, Tank 2
3 S 1302 Rivet 5x19 4
4 S 3629 Screw 5x25 4
5 S 3 3 Washer 4
6 S 0476 Tank 1
7 S 1026 Screw 5x30 4
S 25 6 Adapter, Tank 1
9 S 2 46 Gasket 1
10 S 2593 Deflector 1
11 S 25 3 Inlet Cover 1
12 S 2594 Button 1

18
Cart Assembly 15S
No. Part# Description Qty.
1 S 2993 Handle 1
2 S 0917 Support, Handle 2
3 S 0913 T-Tube 2
4 S 1301 Rivet 5x11 2
5 S 0902 Block 1
6 S 0914 Hand Wheel x60 1
7 S 1402 Spring 1
S 1403 Plate, Threaded 1
9 S 1301 Rivet 5x11 2
10 S 0901 Base, Cart 1
11 S 0915 Screw 12x140 2
12 S 102 Masher M12 2
13 S 0904 Wheel 2
14 S 1401 Bushing 2
15 S 2052 Spacer 2
16 S 1301 Rivet 5x11 2
17 S 0479 Caster 2
1 S 1012 Washer 2
19 S 047 Nut M10 2
20 S 6250 Hand Grip 2

19
Tank Assembly 15PLT
No. Part# Description Qty.
1 S 1 47 Clamp, Tank 2
2 S 1300 Rivet 5x24.5 4
3 S 3773 Tank 1
4 S 1026 Screw 5x30 4
5 S 25 6 Adapter, Tank 1
6 S 2 46 Gasket 1
7 S 2593 Deflector 1
S 25 3 Inlet Cover 1
9 S 2594 Button 1
10 S 260 Spring 1
11 S 3771 Bumper 1
12 S 2993 Handle 1
13 S 3 3 Washer, Plastic 2
14 S 1026 Screw 5x30 2
15 S 1026 Screw 5x30 4
16 S 3 3 Washer, Plastic 4
17 S 2172 Hook, Tank 1

20
Cart Assembly 15PLT
No. Part# Description Qty.
1 S 2053 Spring 2
2 S 2607 Spacer 2
3 S 2173 Lock, Plastic 2
4 S 1979 Screw 5x25 4
5 S 3725 Clamp 2
6 S 3751 Shaft 1
7 S 3694 Handle 1
S 3 35 Cap, Axle 2
9 S 2557 Cap, End 2
10 S 0904 Wheel 2
11 S 2607 Spacer 2
12 S 29 0 Spacer 2
13 S 3752 Axle 1
14 S 1026 Screw 5x30
15 S 2967 Support, Axle 2
16 S 1050 Screw 5x35 2
17 S 2974 Washer 6
1 S 2627 Screw 5x40 12
19 S 1006 Screw 5x20
20 S 2559 Caster 2
21 S 3797 Base, Cart 1