IPC Eagle S6EVO Guide

Canister Vacuums
S6EVO
Operations and Parts Manual
Models:
S6EVO

2

3
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precauti n must always be f ll wed, including the f ll wing:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
This machine is f r c mmercial use.
WARNING
WARNINGWARNING
WARNING
DANGER:
DANGER: DANGER:
DANGER: Failure t read and bserve all DANGER statements c uld result in severe b dily injury
r death. Read and bserve all DANGER statements f und in y ur Owner’s Manual and n y ur
machine.
WARNING:
WARNING: WARNING:
WARNING: Failure t read and bserve all WARNING statements c uld result in injury t y u r t
ther pers nnel; pr perty damage c uld ccur as well. Read and bserve all WARNING statements
f und in y ur Owner’s Manual and n y ur machine.
CAUTION:
CAUTION: CAUTION:
CAUTION: Failure t read and bserve all CAUTION statements c uld result in damage t the
machine r t ther pr perty. Read and bserve all CAUTION statements f und in y ur Owner’s
Manual and y ur machine.
DANGER:
DANGER: DANGER:
DANGER: Failure t read the Owner’s Manual pri r t perating r attempting any service r
maintenance pr cedure t y ur machine c uld result in injury t y u r t ther pers nnel; damage t
the machine r t ther pr perty c uld result as well. Y u must have training in the perati n f this
machine bef re using it. If y u r y ur perat r(s) cann t read English, have this manual explained
fully bef re attempting t perate this machine.
DANGER:
DANGER: DANGER:
DANGER: Operating a machine that is n t c mpletely r fully assembled c uld result in injury r
pr perty damage. D n t perate this machine until it is c mpletely assembled. Inspect the machine
carefully bef re perati n. Use nly as described in this manual. Use nly the manufacturer’s
rec mmended attachments.
DANGER:
DANGER: DANGER:
DANGER: Machines can cause an expl si n when perated near flammable materials and vap rs.
D n t use this machine with r near fuels, grain dust, s lvents, thinners, r ther flammable
materials.
DANGER:
DANGER: DANGER:
DANGER: D n t
D n t D n t
D n t pick up flammable fluids, dust r vap rs.
DANGER:
DANGER: DANGER:
DANGER: D n t
D n t D n t
D n t vacuum anything that is burning r sm king, such as cigarettes, matches, r h t
ashes.
DANGER:
DANGER: DANGER:
DANGER: This machine is n t
is n t is n t
is n t suitable f r picking up health endangering dust.
DANGER:
DANGER: DANGER:
DANGER: Using a machine with a damaged p wer c rd c uld result in an electr cuti n. D n t use
the machine if the p wer c rd is damaged. D n t use the electrical c rd t m ve the machine. Keep
c rd away fr m heated surfaces. D n t unplug by pulling n the c rd; grasp the plug, n t the c rd.
Turn ff all c ntr ls bef re unplugging. D n t cl se a d r n c rd r pull ar und sharp edges r
c rners.
DANGER:
DANGER: DANGER:
DANGER: Electr cuti n c uld ccur if maintenance and repairs are perf rmed n a unit that is n t
pr perly disc nnected fr m the p wer s urce. Disc nnect the p wer supply bef re attempting any
maintenance r service.

4
Warning:
Warning: Warning:
Warning: Operating a machine with ut bserving all labels, decals, etc., c uld result in injury r
damage. Read all machine labels bef re attempting t perate the machine. Make sure all f the
labels are attached r fastened t the machine. Get replacement labels and decals fr m the
manufacturer’s distribut r.
Warning:
Warning: Warning:
Warning: Electrical c mp nents can “sh rt- ut” if exp sed t water r m isture. Keep the electrical
c mp nents f the machine dry. Always st re the machine in a dry area.
Warning:
Warning: Warning:
Warning: Use f this machine t m ve ther bjects r t climb n c uld result in injury t the pera-
t r r damage t the machine. D n t use this machine as a step r furniture. D n t all w t be used
as a t y. Cl se attenti n is necessary when used by r near children.
Warning:
Warning: Warning:
Warning: M ving parts f this machine can cause injury and/ r damage. Keep hands, feet, l se
cl thing, hair, fingers, and all parts f the b dy away fr m penings and m ving parts.
Warning:
Warning: Warning:
Warning: Electr cuti n c uld ccur if y u handle the plug r appliance with wet hands. D n t handle
plug r appliance with wet hands.
Warning:
Warning: Warning:
Warning: D n t use with ut dust bag and r filters in place.
Warning:
Warning: Warning:
Warning: R tating fan blades inside the c ver. Bef re pening c ver, switch ff machine. Wait until
the fan/brush st ps c mpletely r dust and debris may be ejected.
Warning:
Warning: Warning:
Warning: If the machine is n t w rking pr perly, has been dr pped, damaged, left utd rs, r
dr pped int water, return it t an Auth rized service center.
Warning:
Warning: Warning:
Warning: Damage c uld ccur t machine if penings are bl cked. D n t put any bject int
penings. D n t use any pening bl cked: keep free f dust, lint, hair, and anything that may reduce
air fl w.
Warning:
Warning: Warning:
Warning: Injury c uld ccur t the perat r r the machine if used with ut the dust bag and/ r filters
in place. D n t use the machine with ut the dust bag and/ r filters in place.
Warning:
Warning: Warning:
Warning: Injury t the perat r and/ r damage t the machine c uld ccur when cleaning n stairs,
unless cauti n is used. Use extreme cauti n when cleaning n stairs.
Warning:
Warning: Warning:
Warning: T reduce the risk f electrical sh ck, always use a 3-wire electrical system c nnected t
the electrical gr und. Whenever p ssible c nnect the machine t an utlet pr tected by a gr und fault
interrupter (GFCI). See “Gr unding Instructi ns.”
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS

5
120 V lt Machine Instructi ns F r
120 V lt Machine Instructi ns F r 120 V lt Machine Instructi ns F r
120 V lt Machine Instructi ns F r
C nnecti n T The P wer Supply And The
C nnecti n T The P wer Supply And The C nnecti n T The P wer Supply And The
C nnecti n T The P wer Supply And The
Electrical Gr und
Electrical Gr undElectrical Gr und
Electrical Gr und
This machine must be c nnected t the electrical gr und
t pr tect the perat r fr m electrical sh ck. The machine
has an appr ved p wer c rd with three c nduct rs and a
plug with three terminals. C nnect the plug t a recepta-
cle that has three h les and is c nnected t the electrical
gr und. The green ( r green and yell w) c nduct r in the
c rd is the gr und wire. Never c nnect this wire t any
terminal ther than the gr und terminal.
This machine uses a 120 v lt AC 60 cycle electrical
circuit. Make sure y u have the c rrect frequency and
v ltage bef re c nnecting the p wer c rd t an utlet.
The machine has a plug as sh wn in Figure 1. If a recep-
tacle c nnected t the electrical gr und as sh wn in Fig-
ure 1 is n t available, have ne installed by an electrical
c ntract r. D n t use an adapter.
D n t use an adapter.D n t use an adapter.
D n t use an adapter.
Warning:
Warning: Warning:
Warning: T reduce the risk f electrical sh ck, pr tect the machine fr m rain. Keep the machine in
a dry area.
Warning:
Warning: Warning:
Warning: T reduce the risk f electrical sh ck, always use a 3-wire electrical system c nnected t
the electrical gr und. Whenever p ssible c nnect the machine t an utlet pr tected by a gr und fault
interrupter (GFCI).
Warning:
Warning: Warning:
Warning: D n t cut, rem ve r break the gr und pin. If the utlet d es n t fit the plug, c nsult y ur
electrical c ntract r.
Warning:
Warning: Warning:
Warning: Have w rn, cut r damaged c rds and plugs replaced by an auth rized service pers n.
Warning:
Warning: Warning:
Warning: If it bec mes necessary t use an extensi n c rd t reach an electrical utlet, y u must
use ne that is at least ne size larger in wire size. Such as a p wer c rd that is marked 12/3 w uld
need t use an extensi n c rd that is marked 10/3. D n t use an extensi n c rd that is undersized.

6
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONSIMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
• Bef re use the equipment must be c rrectly assembled with all f its c mp nents
• Check that the electrical utlet is c rrect f r use with the plug n the machine
• Bef re c nnecting, check that the specified m t r v ltage c rresp nds t the main
v ltage available
• Never use the equipment near flammable, expl sive r t xic substances: sparks fr m
the m t r c uld cause danger us reacti ns.
• Always unplug the machine fr m the electrical utlet when leaving machine unattended
r bef re attempting any repair.
• Service and repair sh uld be d ne by qualified pers nnel nly. Use nly riginal
manufacturer’s replacement parts.
Operati n
Operati nOperati n
Operati n
This machine is a c mmercial vacuum designed f r wet r dry pick up . And must be st red
This machine is a c mmercial vacuum designed f r wet r dry pick up . And must be st red This machine is a c mmercial vacuum designed f r wet r dry pick up . And must be st red
This machine is a c mmercial vacuum designed f r wet r dry pick up . And must be st red
in a dry l cati n.
in a dry l cati n.in a dry l cati n.
in a dry l cati n.
1. Attach paper bag t tank inlet deflect r. See Figure 1.
2. Ensure that the cartridge filter is securely attached t the
b tt m f the vacuum head. See Figure 2.
3. Place vacuum head nt the tank and secure it with the tw
clamps.
4. Insert h se int the tank inlet until it l cks in place. See
Figure 3.
5. Attach appr priate cleaning t l. F r pti nal p wer brush
attachment, see P wer Head and Wand Assembly.
6. Activate the vacuum by pressing the switch n the vacuum
head.
Figure 1
Figure 2
Figure 3
After Use
After UseAfter Use
After Use
1. St re the c rd n the h k.
2. St re the appliance ind rs, away fr m s urces f heat.
3. This appliance is pr vided with an aut matically reset
thermal limiter t av id damage t m t r. If thermal limiter
perates d ne r m re f the f ll wing:
• Change the bag
• Clean r replace the cartridge filter
• Check h se and tank inlet f r any bstructi ns
• Wait a few minutes f r the thermal limiter t re-cl se the circuit

7
P wer Head and Wand Assembly Instructi ns
P wer Head and Wand Assembly Instructi nsP wer Head and Wand Assembly Instructi ns
P wer Head and Wand Assembly Instructi ns
Figure 1
Figure 2
Figure 3
Figure 4
1. Slide n the tw c llars as pictured. See Figure 1
2. Insert wand int the p wer head neck until it st ps.
Slide the small c llar int the neck f the p wer head.
Screw the large c llar nt the p wer head until tight.
See Figure 2
3. Firmly press the tw wands t gether.
4. Firmly press the upper bent wand int the straight
wand.
5. Attach tw c rd hangers t wand and c rd. See Figure 3
6. Evenly attach 3 c rd hangers t the h se and c rd.
7. Plug p wer head int the p wer head receptacle. See
Figure 4

8
Peri dic Maintenance
Peri dic MaintenancePeri dic Maintenance
Peri dic Maintenance
(Every six t twelve m nths)
(Every six t twelve m nths)(Every six t twelve m nths)
(Every six t twelve m nths)
1. Check filter f r wear, replace dirt saturated filters that d
n t resp nd t n rmal cleaning.
2. Inspect gasket seals and replace th se which have begun t
leak.
3. Examine carb n m t r brushes and c mmutat r.
Servicing The Filter
Servicing The FilterServicing The Filter
Servicing The Filter
The filter is accessed by lifting the head assembly ff the tank.
The P lyester cartridge filter assembly is easily rem ved by simply prying the cartridge filter ff f the supp rt
assembly.
N te:
N te:N te:
N te:
• Be sure t frequently clean the filters.
• All w filters t th r ughly air dry after washing them bef re returning them t the machine.
• W rn filters can affect vacuum perf rmance. Replace the filters when they bec me w rn ut and n rmal
cleaning will n t rest re vacuum perf rmance.
Servicing The Vac M t r
Servicing The Vac M t rServicing The Vac M t r
Servicing The Vac M t r
M t r Replacement
M t r ReplacementM t r Replacement
M t r Replacement
1. Disc nnect p wer c rd fr m p wer s urce.
2. T access the vac m t r, rem ve the screws that attach the main c ver t the head assembly and set the
c ver t ne side.
3. Disc nnect the m t r’s 2 lead wires fr m the m t r.
4. Rem ve the three m t r m unting screws.
5. Rem ve m t r plate and set aside.
6. Take ut the m t r and rem ve the upper and l wer gaskets.
7. Inspect gaskets. If they sh w signs f wear replace them.
8. Install gaskets nt new m t r ensuring that they are pr perly seated.
9. Install the new m t r. Make sure f am mufflers are p siti ned pr perly.
10. Attach m t r plate t m t r.
11. C nnect m t r’s 2 lead wires t m t r.
12. Re-assemble vac c ver.
13. Test f r pr per perati n.
S853200261.00

9
Servicing The Vac M t r
Servicing The Vac M t rServicing The Vac M t r
Servicing The Vac M t r
Carb n Brush Replacement
Carb n Brush ReplacementCarb n Brush Replacement
Carb n Brush Replacement
(Replacement Carb n Brushes: Part# )
1. Disc nnect p wer c rd fr m p wer s urce.
2. T access the vac m t r, rem ve the screws that attach the main c ver t the head
assembly and set the c ver t ne side.
3. Rem ve the screws that attach the inner c ver t the head assembly and set aside.
4. Rem ve the carb n brush assembly by rem ving the 2 screws that attach it t the vac
m t r. See Figure 1
5. Slide ff the carb n brush c nnect r fr m the m t r terminal. See Figure 2
6. Inspect armature c mmutat r. If it is extremely pitted, gr ved r n t c ncentric then
the m t r will need t be replaced r sent t a qualified service center.
7. Reverse steps 6 thr ugh 4 t install new carb n brush and h using.
8. Repeat steps 4 thr ugh 7 f r the ther carb n brush.
9. Reverse steps 3 and 2 f r re-assembly.
10. Test f r pr per perati n.
Figure 1 Figure 2

10
Vacuum M t r Assembly S6EVO
Vacuum M t r Assembly S6EVOVacuum M t r Assembly S6EVO
Vacuum M t r Assembly S6EVO
Item
ItemItem
Item Part#
Part#Part#
Part# Descripti n
Descripti nDescripti n
Descripti n Qty
QtyQty
Qty
1 S83863 Electric C rd 2 x 16 AWG 1
2 S80138 Strain Relief 1
3 S820362 C ver, T p 1
4 S81005 Screw, M5 x 14 3
5 S820336 Handle 1
6 S87813 C ver, Switch 1
7 S820359 C ver, H using 1
8 S820573 Filter, Exhaust 1
9 S83937 Filter, Intake 1
10 S83969 Gasket 1
11 S820325 C ver, M t r 1
12 S81006 Screw, M5 x 20 3
13 S81006 Screw, M5 x 20 1
14 S80139 Clamp, C rd 1
15 S86013/4.8 Switch 1
16 S820341 Plate, M t r 1
17 S820361 Gasket, M t r Upper 1
18 S820867 M t r, 1000w 120V 1
19 S820360 Gasket, M t r L wer 1
20 S820056 O-Ring 1
21 S820342 Base 1
22 S81026 Screw M5 x 30 6
23 S87799 Gasket, Vac Head 1
24 S87936 Filter, Cartridge 1
25 S83900 Muffler, F am 1
26 S83706 Bushing 3
27 S83724 Screw M5 x 25 3
28 S820438 Fl at 1
29 S820327 B dy, Fl at Guide 1
30 S820713 Filter, Fl at 1
31 S83117 Strainer 1
32 S82392 Receptacle, P wer 1
33 S81004 Screw, M4.5 x 20 1
Tank Assembly S6EVO
Tank Assembly S6EVOTank Assembly S6EVO
Tank Assembly S6EVO
Item
ItemItem
Item Part#
Part#Part#
Part# Descripti n
Descripti nDescripti n
Descripti n Qty
QtyQty
Qty
1 S820993 Tank 1
2 S820613 Wheel, Rear 2
3 S820948 Pin 2
4 S87885 Caster 2
5 S87796 Deflect r 1
6 S821079 Latch 2
7 S81302 Rivet 4

11
P wer Head Assembly S70000
P wer Head Assembly S70000P wer Head Assembly S70000
P wer Head Assembly S70000
Item
ItemItem
Item Part#
Part#Part#
Part# Descripti n
Descripti nDescripti n
Descripti n Qty
QtyQty
Qty
1 VCA1BAS350 Base 1
2 VCSA8VTEL Screw Kit 1
3 VCA1SUPRSX Right Side Plate 1
4 VC1108035000 Bearing 2
5 VCSA4R3N1 R ller Brush C mplete 1
6 VCA1SUPRDX eft Side Plate 1
7 VCA2CTRU Belt, P ly V 1
8 VCA1CARNE3 Case 1
9 VCA2GUPANE 14” Bumper 1
11 VCAPASB Gr mmet, C rd 1
12 VCSA3CAESTC Base, C rd 1
13 VCA1R57 Wheel 2
14 VCA1PER Pin, Wheel 2
15 VCSA1MIC Micr switch, C mplete 1
16 VCA1CMICP Micr switch C ver 1
17 VCSA8VTEL Screw Kit 1
18 VCA1CFSNEP T p C ver 1
19 VCSA8VTEL Screw Kit 1
20 VCSA8VTEL Screw Kit 1
21 VCA1CABCC Clamp, C rd 1
22 VCSA3MO3P C nnecting Terminal 1
23 VCA1SMPA M t r Supp rt, Rear 1
24 VCSA3MT2AC Brush M t r, C mplete 1
25 VCA1SMAA M t r Supp rt, Fr nt 1
26 VCA3CAMT Carb n Brush, M t r 2
27 VCA8MCMT Carb n Spring, M t r 2
28 VCA1SNINE J int 1
29 VC11170070000 Clips 2
30 VCA1PSF Neck 1
31 VCA1AFSE C llar 1
32 VCA1GSEF C llar, L cking 1

12
T ls
T lsT ls
T ls
1
11
1
2
22
2
3
33
3
4
44
4
5
55
5
6
66
6
7
77
7
Item
ItemItem
Item Part#
Part#Part#
Part# Descripti n
Descripti nDescripti n
Descripti n Qty
QtyQty
Qty
1 S70616 Hand T l 1
2 S70617 Crevice T l 1
3 S70004 R und Brush 1
4 S7993G H se 1
5 S76240 Wand, Straight 2
6 S76158 Wand, Curved 1
7 S70632 D uble Use Fl r Brush 1
Filters
FiltersFilters
Filters
S87882 Paper Bags, 5/pkg
S877934 Hepa Filter, Cartridge
S87936 P ly Cartridge Filter

13
Warranty Policy
Limited Warranty
IPC Eagle warrants new cleaning equipment against defects in material and
workmanship under normal use and service to the original purchaser as detailed
below .
10 years
Subject to the conditions stated below, IPC Eagle warrants polyethylene tanks and
housings to be free from defects in materials and workmanship for a period of ten
years.
3 years
Subject to the conditions stated below, IPC Eagle warrants all automatic scrubber
components to be free from defects in materials and workmanship for a 3-year period.
Parts replaced or repaired are warranted for the remainder of the original warranty
period.
1 year
Subject to the conditions stated below, IPC Eagle warrants all other cleaning
equipment components to be free from defects in materials and workmanship for a 1
-year period. Parts replaced or repaired are warranted for the remainder of the origi-
nal warranty period. Batteries are pro-rated for one year.
IPC Eagle will furnish and charge for replacement parts, including transportation, to
the original owner through an IPC Eagle authorized service center. If the part is
returned within 30 days and is found defective, the owner will be credited for the cost
of the replacement part including shipping and handling.
Labor charges are covered for one year from the date of purchase if provided by an
authorized IPC Eagle service center. Travel is covered for 90 days for battery
operated equipment only.
Wear items exempt from warranty include belts, carbon brushes, power cords, wheels,
pad drivers, clutch plates, brushes, pads, handle grips, filters, screens, throttle cables,
hoses, and squeegees.
This warranty shall not apply to failures caused by misuse or abuse, improper
maintenance as stated in the operation manuals, use of unauthorized repair parts,
repairs by other than an IPC Eagle authorized service center, and damage in transit.
IPC Eagle disclaims and denies any liability for any direct, indirect, special incidental
or consequential damage which may be suffered as a result of sale, delivery,
servicing, use, loss of any product, downtime, labor, freight, or other charges not
expressly included herein.

14