Ipevo high-definition wireless presentation system User manual

Quick Start Guide
Hign-Definitation Wireless Presentation System Congratulations on your purchase of the High-Definition Wireless
Presentation System (WPS-HD). With the WPS-HD, your projector
can wirelessly communicate with any WiFi-enabled computer
or laptop in order to project desktop contents in high definition
quickly and efficiently.
This Quick Start Guide is intended to help you begin enjoying the
benefits of wireless projection right away.
Your package should contain the following:
• High-DenitionWirelessPresentationSystem(WPS-HD)
• Two(2)antennas
• UniversalPowerAdapter(DC5V)with4interchangeableplugs
• USBTokenwithWPSsoftware,fullUserManual,andother
helpful applications
• QuickStartGuide(thisdocument)
Note: For a complete explanation of the features of the WPS-HD,
please refer to the user manual included on the USBToken.
1. OpenyouravailableWiFiInternetconnections,andchoose
“WPS”toconnectwith.(Ifyouareunsurehowtoaccess
availableInternetconnections,pleaseseeusermanualformore
information.)
2. OpenyourInternetbrowser.TheWPSmainpagemayappear
automatically.Ifnot,entertheServerIPfoundontheStartupscreen
intoyourbrowserandpressEntertonavigatetothemainpage.
WPS-HD is compatible with Windows PC — including Windows 7,
Vista,andXP—aswellasMacintoshOS.Followthesestepstoset
up your projector and computer for wireless projection:
1. Twist the antennas onto the gold-plated connectors on either
sideofthebackoftheWPS-HDunit.Donotovertighten.Angle
the antennas upward for best reception.
2.Connecteithertheprojector'sVGAorHDMIcableintotheVGAor
HDMIportonthebackofWPS-HD.
Contents
Setting up WPS-HD
Setting up your computer
3.AttachthepowersupplytothebackofWPS-HD.Insertthe
appropriate plug for your country/region into the adapter firmly
until the tab clicks into place. Tab may be slid down in order to
removeplug.Inserttheplugintoanelectricaloutlet.
4.TheprojectorwillprojectaStartupscreen.Important
informationonthisscreenincludesaLogincodeandtheServer
IPoftheWPS-HD.
3. Click “Download” on the WPS main page. Choose the Windows
7/Vista/XPdownloadifusingWindows,orthe"MacUtility"
downloadifusingMac.FollowthepromptstoinstalltheWPS
software.
4.Alternately,youcanuseWPS-HD,withouttheneedtoinstallthe
software,usingtheincludedUSBtoken.

WPS-HD has the ability to simultaneously project up to four
desktops in split screen. This is useful for comparing data or
multimedia presentations.
To use split-screen mode, follow the steps just described for each of
up to four computers.
However,instead
of pressing the Play
button (the final step),
click on one of the four
split-screen buttons
(labeled1through4).
Useadifferentnumber
for each computer to
display them in the
four different sections
oftheprojector'ssplit
screen.
Split-screen mode
Conference mode allows a single administrator to control the
projector'scontentsatanytimewhenusingsplit-screenmodeand
multiple computers. To access this mode:
1. Navigatetheadministrator'sInternetbrowsertotheWPSmain
pagebyenteringtheServerIPfoundontheStartupscreen.
2.BelowtheDownloadtabisConferenceControl.Clickonthis
tab.Apasswordpromptwillappear.Thedefaultpasswordis
"trainer".Inputthepasswordandlogin.
Ifyou'dliketoprojectaudioalongwithvideo,youwon'tneedto
doanythingelseifyou'reusingWindows7,WindowsVista,orMac.
Sound from your computer will automatically be sent through the
projector'sspeakers.Ifyou'reusingWindowsXP,followsthese
steps to project audio:
1. InserttheincludedUSBTokenintoyourcomputer.In
theApplicationsfolderontheToken,double-click"VAC_
Setup1.0.8.5(forXP).exe"toinstalltheVirtualAudioControl.
2.YounowneedtoselecttheVirtualAudioDriverasyourplayback
device.ClickonControlPanel>>Sounds,Speech,andAudio
Devices>>SoundsandAudioDevices.
3.ClicktheAudiotab.UnderSoundPlayback,changetheDefault
Deviceto"VirtualCable1".ClickOK.
4.Theprojectorwillnowplaythecomputer'saudio.Rememberto
switchbacktoyourprevioussounddeviceafterusingWPS-HD.
On the control
panel, Speedy mode
is indicated by a
speedometer icon.
Conference mode Audio projection
Speedy mode
1. Aftersuccessfulsoftwareinstallation,double-clicktheWPSicon
on your desktop to start the WPS client.
2.Aloginscreenwillappear:
 -For“ServerIP”entertheServerIPaddressfromtheprojector
Startup screen (if it does not already appear).
 -For“UserName”enterwhateveryou'dliketoidentifythecomputer.
-For “Login Code” enter the four-digit login code displayed on
the Startup screen.
-Click Okay.
3.Acontrolpanelwillappear.ClickthePlaybuttontoenterfull-
screen projection mode. The projector will automatically sync
with your computer, and the contents of your desktop will be
projectedinrealtimeandhigh-denition720p.
Communicating with WPS-HD
3.Alistwillappearofallthecomputerscurrentlyconnectedto
theWPS-HD.UnderthePlayControlcolumn,theadministrator
may click on the buttons to control what is projected for each
computer.Buttonsinclude:
: Computer'scontentswillbeprojectedinfullscreen(no
split-screen)
:Computer'scontentswilloccupyQuadrant#1ofsplit-screen
mode
:Quadrant#2ofsplit-screenmode
:Quadrant#3ofsplit-screenmode
:Quadrant#4ofsplit-screenmode
: Stopsthecomputer'scontentsfromprojectingaltogether
NOTE: Audio projection is only available if you're using an HDMI
connection.
Click on the speedometer to enable Speedy mode. Speedy mode
buffersthevideoimagesothatvideoplaybackissmoother.The
projectorwillpauseafewsecondsforvideosyncaswellasaudio
sync.WerecommendenablingSpeedymodeforallofyourvideo
projections to ensure smooth playback.