iReliev Conductive Back Wrap User manual

Conductive Back Wrap
Instruction Manual
Read Before Using

IMPORTANT INFORMATION
iReliev™Conductive Back Wrap is particularly safe and user-
friendly. When the Wrap is fastened and the electrode pads are in
contact with the skin, the intensity of the iReliev™TENS device may
be adjusted.
iReliev™Conductive Back Wrap
(Accessory to iReliev™TENS Device Model # ET-7070,ET-9090)
Table of Contents
Introduction 3
Safety Information 4-5
Package Contents 6
Parts Diagram 7
Putting on the Wrap 8-9
Trouble Shooting 10
Care and Maintenance 11
Warranty 12
2

3
The iReliev™CONDUCTIVE BACK WRAP has been designed for people who
suffer from muscular tension and pain in their back. It provides a natural drug free
alternative that treats back pain the natural way with no side effects.
Your iReliev™CONDUCTIVE BACK WRAP is an accessory to your Transcutaneous
Electric Nerve Stimulation (TENS) device. It deliver TENS treatment in the low
frequency range. When using this method, weak electrical pulses are produced onto
the skin using two or more electrodes.
This stimulates muscles, nerve bers and acupuncture meridians in order to activate
your body’s own pain relief mechanisms.
Chronic pain can be treated with different methods such as medication, injections,
surgical procedures or with alternative treatment methods such as acupuncture or
TENS.
The TENS treatment can block pain signals by interrupting the transmission of
impulses through the skin by means of electric impulses. As a result, the signal
interpreted as “pain” is not transmitted to the brain and thus not felt.
Furthermore, it will work with the body’s own pain inhibitors; harmless and gentle
electric currents from the TENS device stimulate the release of endorphins that
function as a pain reducer. The pain is therefore stopped, eased or removed by the
body itself.
This electrical stimulation cannot remove the causes of pain or cure a disease, but it
could help ease or block pain in the body.
In order to achieve all the benets from the iReliev™Conductive Back Wrap,
carefully read the following safety information and warnings before use.

Safety Information
Use this device only according to its intended purpose as specied in this
instruction manual. The warranty will be invalidated if the device is used for
other than the intended purpose.
Do not use the device if it is not operating correctly, or if it has fallen into water
or has been damaged.
Do not attempt to repair the device yourself in the event of a malfunction; this
will invalidate the warranty.
Do not operate this device near high-frequency transmitters, such as
microwaves, short wave transmitters or radio transmitters. This may impair the
device’s ability to function.
Do not switch the device on until the wrap has been xed on the body. Do not
use the device while taking a bath or a shower.
Do not use this device while sleeping.
Do not use this device while driving a car or another kind of vehicle or while
operating machinery or heavy equipment.
Protect the device from moisture. If liquid should get into the device, remove
the battery immediately and discontinue use. Should this happen, contact
iReliev™at 1-406-672-6066.
Never use the device in rooms where aerosols (sprays) are used or medical
grade oxygen is being administered.
Do not use with any creams, lotions or gels.
Do not use with heating pad or any other electrical device.
4

5
Caution, the device should not be used by patients with:
Pacemakers, debrillators or extreme cardiac irregularities
Metal implants or electronic auxiliary devices
Diabetes or abnormally high blood pressure
A tendency toward internal bleeding
Pregnant women
Therapy with the iReliev™ CONDUCTIVE BACK WRAP is a natural way of ghting
pain; however it does not replace medical diagnosis or treatment. If you are not
sure, consult your doctor before using this device.
Consult your doctor always before use, if you suffer from epilepsy or certain
disabilities.
Persons whose sensitivity is disturbed or impaired should only apply this device
under supervision of your physician.
Do not use this device if suffering from menstrual pains.
Do not use this device if your skin burns or is numb.
Pain relief treatment following injury or an operation should only be carried out under
the careful supervision and instruction of a doctor or physical therapist.
Do not treat parts of the body that are swollen, burned, inamed, peeling skin,
wounds or other sensitive points.
In case of doubt, consult a doctor or medical professional for instructions and
guidance.
Keep the unit out of the reach of children.
Treatment should be monitored if used on or near children or persons who are
handicapped and only have a limited capability to use this device.
If you feel pain or have an unpleasant feeling, stop treatment and consult your
doctor.

Package Contents
Before using this accessory, make sure that you have all components.
The iReliev™Conductive Back Wrap includes:
1.) 1 Conductive Back Wrap
2.) 1 Instruction/ User Manual
The packaging can be reused or recycled. Please dispose of properly if no longer required.
If you notice any damage from shipping, Please contact ExcelHealth Inc. at 406-672-6066
6

7
Parts Diagram
Description:
1.) Integrated Connection Cables
2.) Conductive Silicone Pads
3.) iReliev™Conductive Back Wrap
4.) Hook and Loop Closure

Putting on the iReliev™Conductive Back Wrap
1.) Before putting on the Conductive Back Wrap, remove any residue on skin, cream or
ointment. Make sure that your skin is clean and free of oil.
Do not place the wrap on injured or inamed areas of the skin, such as wounds, sores,
rashes or reddening.
2.) Before use, dampen the integrated silicon electrodes with water.
3.) Position the electrode pads on the area of the body to be treated. If your back aches at
waist level; you are suffering from pain in the upper treatment area. Position the wrap
so that the middle of the wrap is at waist level.
8

9
4. If your back pain is in the lower treatment area, position the wrap so that the middle of the wrap
sits approximately 1 to 2 inches below the waist.
5. When the wrap has been placed into the correct position, bring the two ends of the neoprene
straps together and fasten with the built-in hook and loop pads.
6. The wrap may be tightened or loosened as shown by adjusting the hook and loop closure
(See diagram below)
Caution: Subjective perception of the electric current may alter with changing frequencies or
pulse widths. Lower the intensity as soon as the application becomes unpleasant or the pleasant
prickling sensation is not felt for a long period of time.

DEFECT
The device does
not turn on
The device turns on
and then off again
The device turns
on, but does not
generate electric
pulses
The unit does not
turn on even though
new batteries have
been inserted
REMEDY
Replace battery
Insert battery again
Replace battery
Contact ExcelHealth
at 1-406-672-6066
Contact ExcelHealth
at 1-406-672-6066
Connect cable properly.
Switch unit to the OFF
position and turn
it back on
Contact ExcelHealth
at 1-406-672-6066
CAUSE
No battery or battery life
expired
Battery not inserted
properly
Battery life expired
Lead Wire Cables broken
Cable not connected
properly, treatment time
has expired
Trouble Shooting
Always check the unit and accessories before use to prevent damage and defects;
these are some of the simple checks:
1.) Make sure the battery on the iReliev™ TENS Device has sufcient charge and is
not corroded.
2.) Make sure the cables t tightly into the connection sockets of the device. The table
below shows some common defects. If you cannot remedy the defects as described,
contact iReliev® at 1-406-672-6066.
10