Iridium GO! exec User manual

Let’s
Get
Started.

1Iridium GO! exec Quick Start Guide
Contents
English..................................................................................................................................................................................................2
French.................................................................................................................................................................................................10
Japanese............................................................................................................................................................................................18
Russian...............................................................................................................................................................................................26
Spanish..............................................................................................................................................................................................34
Iridium GO! exec Quick Start Guide

Iridium GO! exec Quick Start Guide 32 Iridium GO! exec Quick Start Guide
Let’s
Get
Started.

Iridium GO! exec Quick Start Guide 32 Iridium GO! exec Quick Start Guide
What is the Iridium GO! exec?
Built with professionals in mind, the Iridium GO! exec™ provides satellite connectivity that enables you to:
• Connect multiple smart devices
• Access 2 voice and 1 data sessions simultaneously
• Utilize built-in speaker phone functionality
• Use standard apps for your instant messaging, social media and much more
What’s in the box?
• Iridium GO! exec device
• Protective Cover: This custom-built cover snaps on easily to the top of the device to protect it from
direct sunlight and scratches to the touchscreen. It also snaps on to the bottom to protect from rough
surfaces.
• Documentation: Quick Start Guide, Product Safety and Regulatory Card and Important SOS
Information Booklet
• Accessories: AC wall charger with four international adapters, DC car charger and USB-C cable
WARNING: Prior to using Iridium GO! exec, read and understand the user manual including the
safety warnings and information. Failure to do so could result in serious injury or death.
The Iridium GO! exec must be turned o at all times while on board aircraft. The device may be used by the
pilot or with the pilot’s consent (US Code of Federal Regulation (CFR): 47 C.F.R.25.285).
Your Iridium GO! exec comes with a Limited Warranty. For terms and conditions, see the user manual on www.iridium.com.

Iridium GO! exec Quick Start Guide 54 Iridium GO! exec Quick Start Guide
Device Setup in Two Easy Steps
Required: Iridium GO! exec App:
Search and download the
Iridium GO! exec App using
high-speed Internet.
Optional: Search and download the
following from the App Store
SM
and Google Play™ on
high-speed network.
Iridium Mail App
This app is optimized for email,
sharing of photos and small les,
and receiving weather forecasts.
Using Iridium Mail App:
Registration is free and required in order to use the
app. Go to https://www.iridium.com/mailandweb/
and complete registration.
Third-Party Apps
For additional Iridium GO! exec
customized apps, visit:
www.iridiumgoexec.com/apps.
Insert the SIM card correctly, as shown on the
icon above the SIM slot.
Plug in device to the provided USB-C charger
and allow to fully charge.
Power on device by swiveling up the antenna
or holding touch power button for 5 seconds.
After powering on the device (power up
sequence approx. 30 seconds) follow prompts/
instructions on device screen and complete
device setup.
Note: Admin pin setup is optional
Make sure to close open aps securely to
maintain water-resistant seal.
1.
2.
3.
4.
1.
2.
IMPORTANT: Prior to rst use, the device must
be connected to the USB-C wall charger and
plugged into the wall power outlet.
IMPORTANT: High-speed
internet is required for
this step.
STEP 1:
Charge and Set up Iridium GO! exec Device
STEP 2:
Install App and Set up Smart Device
APPS
3rd-Party
Apps
connected

Iridium GO! exec Quick Start Guide 54 Iridium GO! exec Quick Start Guide
Device and Screen Overview
SOS
Iridium
SOS
1
6
11
12
713
2
3
4
5
8 9 10
Device Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
SOS Button
SIM Card
Ethernet Port
USB-C Charger
USB-C Headphones/Smart Device Charger
Ext. GPS Connector
External Antenna Connector
Device Speaker
Mic 1
Mic 2
Device Touchscreen
Touch Power Button
Swivel Antenna
Screen Overview
Satellite Signal Strength
SOS Status
Active Call
Error Notication
Internet Status
Wi-Fi Status Indicator
Smart Device Charging Status
Device Battery Status
Time
Call
Internet
SOS
Settings
17
12 13
8
2346
SOS
Iridium
SOS
5
9
10 11

Iridium GO! exec Quick Start Guide 76 Iridium GO! exec Quick Start Guide
16
7
2345
Select Icon to Get Started
00
Contacts
Search...
A
Aaron Cooper
Albert Flores
Albert Robertson
B
Bob Edwards
Brian Henry
Jerome Bell
Bessie Cooper
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
#
Device Battery
Iridium Network Status
Smart Device Charging Status
Internet Status
SOS StatusSOS
Active Call
Error Notification
Iridium SOS
Using the Iridium GO! exec
Iridium GO! exec requires connection to the Iridium satellite network. For optimal
performance, make sure the swivel antenna is vertical to the ground and has a clear,
unobstructed view of the sky.
IMPORTANT: Before you start using the app, refer to the Connection Manager
section for the best data user experience.
Note: Ensure you’re connected to the device’s Wi-Fi, open the app, accept all terms
and conditions, and allow permissions. Select the desired option to get started.
1. Satellite Signal Strength
2. Call
3. Internet
4. SOS
5. Settings
6. Status Icons
• Bluetooth®
• Error Notication
• Smart Device Charging Status
• Device Battery Status
7. Device Status Details

Iridium GO! exec Quick Start Guide 76 Iridium GO! exec Quick Start Guide
1. Getting Started on the Iridium GO! exec App
2. Voice Calls
Note: ALWAYS ensure you’re using the full international dialing sequence: 00 or + [Country Code] [Phone Number].
Using App:
• Using keypad option: To make calls using the keypad option go to Call  Keypad  Enter full
international dialing sequence Press Call. You can also opt to use the country ag dropdown menu on
the screen for the country code list.
• Using Contacts: Go to Call  Contacts  Search and select contact  Press Call
• Quick Dial: The Iridium GO! exec device supports creation of a quick dial list for up to 10 contacts. Once
created, the list gets synced to the device to enable quick access.
• Set up Quick Dial list: Open Iridium GO! exec App  Settings  Device Settings  Admin Settings
 Quick Dial  Select Add Contact  Enter contact manually or select from Contacts  Save. List
gets synced to the device.
Using Device:
• Using keypad option: To make calls using the keypad option go to Call  Keypad  Enter full
dialing sequence  Press Call.
• Using Quick Dial Contacts: Ensure your quick dial list is set up using the app, then go to Call 
Quick Dial  Select Contact  Press Call
Note: To minimize data over the satellite connection, it is strongly recommended to set the Wi-Fi connection to
‘Low Data Mode’ (for iOS) or‘Metered’(for Android).
Before getting started, ensure your smartphone or device is within
approximately 30 m (100 ft) Wi-Fi range and the Wi-Fi option is enabled.
Also ensure your Bluetooth option is enabled as the Iridium GO! exec
uses BLE to send notications to your smart device.
• Open the Iridium GO! exec app and accept all required Terms
and Conditions, permissions and set up SOS if not set up.
• Connect your smart device to the Iridium GO! exec device:
Go to device touchscreen select Settings  Show Wi-Fi Access
Credentials  Screen with QR code, Wi-Fi name and password are
displayed.
• Using Iridium GO! exec app, use the SCAN QR code option to scan and connect to device Wi-Fi.
OR
• Go to Wi-Fi Settings menu on your smart device  Select Iridium XXXX Wi-Fi  Enter password manually
and connect to device Wi-Fi.
Hide Password
SOS
Iridium

Iridium GO! exec Quick Start Guide 98 Iridium GO! exec Quick Start Guide
As satellite data is more expensive than cellular data, it is important to only
allow the data you want to go over the satellite network. Iridium’s Connection
Manager helps you control and manage how you use the internet.
The Connection Manager consists of three items:
• Automatically Disconnect After: Allows you to select the duration of
your internet call. Additional time can be added as required.
• App/Web Prole: Allows you to select the appropriate app or website
link you wish to use. Only one App/Web prole can be selected at a time.
• Data Usage Counter: Displays the accumulated data usage. The counter
can be reset from the settings option on the Iridium GO! exec app. This is
not meant to be used for billing purposes and is just an indicator for how
much data is used.
3. Internet
Using Iridium®Internet
Data on the Iridium GO! exec can be used either wirelessly overWi-Fi or wired
over the ethernet connection. For detailed information please refer to Help
section in the app or the user manual.
Using App:
• To use data on your smart device go to Internet  Select
Automatically Disconnect After time duration (example: 15mins) 
Choose required App/Web Prole (example: Whatsapp) Exit Iridium GO!
exec app Go to selected App/Web example: Open Whatsapp)
Using Device:
• Connect to the device via Wi-Fi or ethernet, then go to Internet
 Select Automatically Disconnect After time duration (example:
15mins)  Select required App/Web Prole example: Browsing)  Go to
selected App/Web Prole on the connected device. If connected via
ethernet to laptop open browser and search for desired URL (example:
http://lite.cnn.com/en)
When a data session is in progress the user can use the Device or App at any
time to add more time or switch between App/Web Proles as required.
User can also terminate data session manually if needed.
9 1
Internet
Connected
Connection Manager
Disconnect
User profile 2 description
Data Usage Counter
A
ccumulat
e data usage since 2 A
ugus
t, 2022
.
This is an appr
o
ximat
e v
alue and should not be used f
or
billing pur
poses.
0 b
yt
es
30 minut
es
Automatically Disconnect After
User pr
ofile 2
App/Web Profile
SOS
Iridium SOS
Connected
30 minut
es
Automatically Disconnect After
User pr
ofile 2
App/Web Profile
User profile 2 description
Disconnect
SOS
Iridium

Iridium GO! exec Quick Start Guide 98 Iridium GO! exec Quick Start Guide
4. SOS
You must congure the SOS button in order to initiate an SOS call to a
designated Call Recipient. Failure to congure the SOS button will result
in no call when the SOS button is pressed. This could prevent or delay an
emergency response and result in serious injury or death.
WARNING
How to use SOS:
From SOS button on the device:
Press the SOS button on the device for a few seconds.
You have 10 seconds to cancel the SOS option if initiated by error.
When SOS call is initiated via the device, you should use the speaker
on the device to communicate and relay your GPS location by reading
it from the device screen.
From device touchscreen or the Iridium GO! exec App interface:
Select the SOS option from the home screen.
Long press the SOS button on the touchscreen to initiate SOS call.
You have 10 seconds to cancel the SOS option if initiated by error.
When SOS call is initiated via the device, use the speaker to
communicate and relay your GPS location by reading it from the
device screen.
When SOS call is initiated via the App, use the mobile phone to
communicate and relay your GPS location by reading it from the
mobile phone or device screen.
Iridium GO! exec is equipped with an SOS feature.
Note: For more information on how to set up
SOS and the SOS test procedure, refer to the
User Manual.
1.
2.
3.
1.
2.
3.
4.
5.
9 1
Activating the SOS now will
take the following action:
Call GEOS
Long press to activate SOS
SOS
SOS
Iridium SOS
SOS
SOS
Iridium