IRISBOND Hiru User manual

Hiru Quick Start Guide
Quick Start Guide
Version 1.1 | English | November 2020

Minimum requirements
Hiru eye-tracker can be used both with Windows and iOS (iPad Pro).
The same eye-tracker works with both operating systems.
Compatibility
Multiplatform
iOs 13 or above Windows 7-10
1.33 GHz
CPU
Intel Graphics
Nvidia and others
with OpenGL 2.0
2 GB
RAM
3 GB + HDD
Hard Disk
Quick Start Guide | Compatibility 2
USB
USB 3.0

Quick Start Guide | Set up 3
Positioning
Depending on the device that you may be
using, an adaptor might be needed:
- For Windows devices, just use the long
C-A cable,. The C male connects to the
Hiru and the A male connects to the
device
- For iPad PRO, the A-C adaptor is
needed. Connect the adaptor to the
iPad Pro, and the long cable to the Hiru
Set up
USB Connection
1. Holder 2. Attached
-
Under the laptop or PC, fix the Hiru on the
holder with the screws.
-
Place the holder on a
screen with the magnets
and screw the Hiru to the holder.
*Find all the details about the holder in this
document.
Attached to a tablet: standard
Rehadapt
bracket (#16.1193) with G screws.
* Contact us for adapting
Hiru to your specific
AAC dedicated device.
adaptor
C-A cable
55 cm
Optimum testing
distance
10’-20’
Optimum screen size

Quick Start Guide | Usage 4
EasyClick: Our computer access software. EasyClick is now compatible with Duo and
Hiru in the same app. Download this new version of EasyClick here.
Grid 3: From version 61 on, Grid 3 is integrated with Hiru so it can be used both Hiru and
Duo.
Microsoft HID: It is possible to use Windows Eye Control with Hiru, for that you will
need to install our HiruSystray app. For more information regarding this, please read the
following document.
Usage
When using third party
apps, the following
Windows message may
appear:
If this is the case, please
allow both private and
public networks.
Keep in mind
Windows
Hiru is ready for controlling Windows devices. You can use our computer control software
EasyClick or any AAC software that we are integrated with.
•Do this during your first installation by hitting both check-boxes
•Or after installation get inside Windows defended Firewall and go to “allow an app or
feature through Windows defender firewall”; then enable the checkboxes accordingly.

Quick Start Guide | Usage & Updating Hiru 5
Usage
We will keep improving Hiru and new versions of firmware will be released. You can update Hiru
every time a new version is released using our HiruSystray app in Windows. To know more about
this, please read this document.
Updating Hiru
Hiru iOS App:: Calibrate Hiru and test the accuracy and tracking experience with
our app. You can download it directly from the App Store here. All the details about
the app in this video.
TouchChat: TouchChat integration with Hiru can be tested. Please contact us if you
are interested. Watch this video for seeing how to use Hiru inside TouchChat.
iOS
Hiru works only on iPad PRO with iOS version 13 or above.
Keep in mind
•Make sure you use only Irisbond cables; the small adapter goes into the iPad
•Unlock your iPad before connecting Hiru
•After connecting, wait 5sec until the Hiru’s LEDs start shining
•Go to iOS Settings and check if a new "Ethernet connection" will appear between Bluetooth
and WiFi named "Hiru". Repeat steps, if needed.
•Open your App

see it possible
[email protected]