Ironman4x4 IAREALED001 User manual

Page 1 of 4
Area Light Kit
Owner’s Manual
IAREALED001
Telephone: [phone]
IMPORTANT: Please read all procedures and precautions before installing and using the Ironman 4x4
Area Light Kit. If you have any questions please contact our customer service department.
www.ironman4x4.com

Page 2 of 4 www.ironman4x4.com
Kit Inclusions and Specifications
Optional Tripod
Part No. IAREATRIPOD
(sold separately)
LED Output
Panel Dimensions
Extension pole
Maximum height
Power input
Wireless control
Power cable
3500 Lumens
200 x 126mm
Anodised aluminium
3 metres
12 Volt DC @ 4A
Up to 10 metres
5 metres
1. Adjustable aluminium pole
2. Metal ground stake
3. Battery clamp cigarette adaptor
4. Power cable with cigarette lighter fitting
5. Wireless remote control
6. COB LED Panel
7. Padded storage bag
1. 2. 3. 4. 6.5.
7.

Page 3 of 4
Assembly
1. Connect the Wireless Receiver and
12VDC Cable to the LED Panel.
3. Extend pole to desired height, gently
twist to secure in place.
5. Connect to a suitable 12VDC power
source.
2. Secure Mounting Stake in a suitable
location and mount pole.
4. Remove Battery Isolating Strip from
Wireless Controller.
*Note the removal of the isolation strip is for first
time only.

Page 4 of 4 www.ironman4x4.com
Operation
1. Once connected to a suitable 12VDC power
source press the Power Button on the
Remote Control.
2. The required brightness level can be
selected by manual adjustment up or down.
Note: If required the light can be operated
directly from the 12VDC input by removing the
Wireless Receiver and connecting the power
cable directly to the LED Panel.
IAREALED001/120821