iSimple Connect User manual

Expand Your Factory Radio
iSimple®
A Division of AAMP of America™
13190 56th Court Clearwater, FL 33760
Ph. 866-788-4237
[email protected]
©2012 AAMP of Florida, Inc.
www.isimplesolutions.com 11-8-12
Installation Manual
iSimple Connect

Table of Contents
Pages
1. Introduction 2
2. Precautions 2
3. Compatibility 3
4. Dipswitch Settings 3
5. Installation 4-5

1
CONNECT®& Optional Add-ons
Connect Vehicle Harness
(Varies by vehicle)
Factory Radio
(Varies by vehicle)
iSimple Connect
AUX Input
OR
OR
HD Radio SCC1 Tuner OR
Android Device
USB Stick iPod/iPhone/iPad
OR
SXV100/
SXV200 Tuner
OR
OR

2
1. Introduction
Thank you for purchasing the iSimple CONNECT®. The CONNECT®is designed
to provide endless hours of listening pleasure from your factory radio. To ensure
that your iSimple CONNECT®performs correctly with your radio, we recommend
that you read this entire manual before attempting installation of the CONNECT®.
The CONNECT®allows connectivity for most USB devices (Android Device,
iPod, iPhone, or iPad or ash drive), Bluetooth, Sirius Satellite Radio (cable and
tuner sold seperately) and HD Radio (tuner sold separately), enabling full control
of these devices from the factory installed radio. It also retains original system
features such as satellite radio and rear seat entertainment (if equipped).
2. Precautions
UPDATING iPod/iPhone/iPad FIRMWARE
Updating the rmware prior to installation or future rmware updates for your iPod,
iPhone, or iPad may affect the features and functions described in this manual.
PREVENTING DAMAGE TO YOUR VEHICLE OR DEVICE.
Some installations require you to make wiring connections. To eliminate the risk
of an electrical short, we recommend disconnecting the vehicle’s battery prior to
installation. If you do not feel comfortable making these connections, we suggest
you seek professional installation.
PROPER MOUNTING LOCATION
Securely install the interface in a location free from; heat, humidity, moving parts,
sharp metal edges or direct sunlight. We recommend securing the interface to a
suitable location using; double sided tape, VelcroTM or zip-ties.
3. Compatibility
Your vehicle MUST either be equipped with, or have the ability to support
Satellite Radio. Please visit www.isimplesolutions.com for the most up to date
application information and to verify your vehicle’s compatibility.

3
4. Dipswitch Settings
Dipswitch1 Dipswitch2 Dipswitch3 Dipswitch4
Acura AllVehicles Of
f
Of
f
Of
f
Of
f
Buick AllVehicles Of
f
Of
f
Of
f
Of
f
Chevrolet AllVehicles Of
f
Of
f
Of
f
Of
f
Ford AllVehicles Of
f
Of
f
Of
f
Of
f
GMC AllVehicles Of
f
Of
f
Of
f
Of
f
Honda AllVehicles Of
f
Of
f
Of
f
Of
f
2010+Vehiclesequippedwithnavigation On Off Off Off
AllOtherVehicles Of
f
Of
f
Of
f
Of
f
Lincoln AllVehicles Of
f
Of
f
Of
f
Of
f
Mercur
y
AllVehicles Of
f
Of
f
Of
f
Of
f
2004‐2007G35
2004‐2011Titan(excluding2009Mid‐
Lineradio;seebelow)
2007‐2009QuestwithSingleColorDisplay Off On Off Off
2007‐2011Frontier
2005‐2006Maxima
2007‐2011Xterra
2009‐2011370z
2011Juke
2007‐2011Altima
2009‐2010Cube
2007‐2011Rouge
2007‐2011Versa Off Off On Off
2005‐2006Altima
2004‐2007Murano
2005‐2008350z Off On On Off
2009‐2011Titan(Mid‐LineRadio)
Mid‐Lineradiobeingdefinedasadoubledin
radiothatisnotfullyintegratedintothedash
andisSatelliteRadiocompatible.
2007‐2008M35/45 On On Off Off
Scion AllVehicles Of
f
Of
f
Of
f
Of
f
2010‐2011Camry(NavorNon‐Nav) On Of
f
Of
f
Of
f
2012+vehiclesequippedwithnon‐navigationtouchscreenradio On Off On Off
Vehiclesequippedwithnavigation On Of
f
Of
f
Of
f
AllOtherVehicles Of
f
Of
f
Of
f
Of
f
Toyota
Nissan
Lexus
Application

4
5. Installation
1. When making electrical connections it is always recommended that the vehicle’s
battery be disconnected from the electrical system before performing the
installation.
Please Note: If the radio is equipped with a built in CD Changer, please
remove ALL discs before proceeding to prevent damage to the radio’s
CD mechanism.
2. Carefully remove the trim panels covering the bolts that secure the radio into
the dash cavity. Remove these bolts, and carefully pull the radio from the dash of
the vehicle. This will provide access to the factory radio harness(es) where you will
plug in the CONNECT®vehicle harness.
3. Disconnect the factory harness(es) from the back of the radio. This may not be
necessary on Honda, Toyota or Scion vehicles.
4. Select the location where the USB port will be mounted. This location will vary
based on the vehicle and the customer’s preference. The USB port can be
mounted with the provided bracket or a 3/4” hole can be drilled somewhere to ush
mount the port. Once mounted, carefully run the USB cable behind the radio to the
CONNECT®. When running this cable through the dash be sure to secure it away
from moving parts or sharp metal edges that may damage the cable. Insert USB
cable into the USB port on the CONNECT®.
5. Select the location where the microphone will be mounted. This location will vary
based on the vehicle and the customer’s preference. Once mounted, carefully run
the microphone cable behind the radio to the CONNECT®. When running this
cable through the dash be sure to secure it away from moving parts or sharp metal
edges that may damage the cable. Insert the 3.5mm microphone jack into the port
on the CONNECT®.
6. Select the location where the reset switch will be mounted. This location will vary
based on the vehicle and the customer’s preference. Once mounted, carefully run
the reset switch connector behind the radio to the CONNECT®. When running this
cable through the dash be sure to secure it away from moving parts or sharp metal
edges that may damage the cable. Insert the reset switch plug into the 2-pin port
on the CONNECT®.
7. Insert the 8-Pin auxiliary input cable to the second port on the CONNECT®if an
additional auxiliary input is desired.
8. If installing the HD Radio Tuner (HDRT sold separartely) or Satellite Radio
tuner (sold separartely), these devices MUST be installed before plugging in
the 24 pin connector. Please refer to the manual included with each part for proper
installation.

5
10. Plug in the male connector(s) on the CONNECT®vehicle harness into the port(s)
on the back of the radio. Next, connect the factory harness(es) into the female
connectors on the CONNECT® vehicle harness. Be sure to make a rm
connection but do not force it. Plug the Black micro-t 24-pin connector on the
CONNECT®vehicle harness into the CONNECT®box.
11. To complete the installation secure the CONNECT®and any other modules into
the cavity in the dash behind the radio. Be sure that the cables and interface
modules are not near moving parts or sharp metal edges as they may damage the
cables. To prevent rattling noises inside the dash, use zip ties, tape, or other
fasteners to mount the interfaces securely.
**PLEASE NOTE: At this point in the installation we recommend
pressing the reset button to clear the ash memory of the Connect.
This will ensure that the interface initializes properly and is recognized
by the radio.
12. With all connections made, reconnect the vehicle’s battery, insert the key into
the ignition, and turn the vehicle on. Check for proper operation of the
CONNECT®before reinstalling the factory dash panels. There is a green and
red status LED located on the interface. When operating properly the green light
will remain solid and the red light will ash with data activity.
Please visit www.iSimplesolutions.com/ConnectInfo to nd the
most up to date operating instructions for your vehicle.

6
For Best Performanc e Have It
Professionally Installe d.
www.isimplesolutions.com