ISkin F1 User manual

1/ 3
Bluetooth headset User Manual
Model: F1
Function
operation
Voice prompt
Power on
pressing long the multifunction button for 3 seconds
power on
Power off
pressing long the multifunction button for 3.5 seconds
power off
Enter into the matching mode
pressing long the multifunction button for 6.5 seconds
Enter into the matching
mode
Answering calls
pressing short the multifunction button once
read The phone number
End calls
pressing short the multifunction button once
End calls
Decline calls
pressing long the multifunction button once
Decline calls
the end of the number
redial
Double-click the multifunction button once
Replay the end of the
code
interrupt dial the phone
pressing short the multifunction button once
Voice dialing
pressing long the multifunction button for 1 seconds
Voice switch
In the condition of matching double-click the multifunction button once
Chinese mode/ English
mode
Pause, Play
pressing short the multifunction button
The volume size/last
song/nest song
pressing long the button of + - adjust the volume ( pressed short adjust
last song/next song )
The micro USB charging port
1.Fully charged need 1 to 2 hours ,when in charge, please open black skin, which located in the right channel's cabinet on the left side
of the metal edge ,can see the Micro USB port, insert the line of charging later, the red light flashing show in charging ,after filled with
electric, the blue lights flashing
2.After fully charged, the headset has the best performance in used
The volume button
1.When in the call ,pressed short the button of volume + key ,the headset volume will increase the level, pressed long can increase the
volume ,when added to the maximum, there will be "drops" prompt.
Left channel
Right channel
USB
LED
Multifunction button
MIC
Sound -
Sound +

2/ 3
2. When listening to music, short press the volume + once times will jump to a song automatically, long press the volume + key, after
hearing "du" sound, loosen yours finger the level of volume will increase, if long press the volume will increase continuous, when
added to the maximum, there would be "drops" prompt.
3.When in call, pressed short the button of volume once , the headphones tends to decrease the volume level ,long press the volume
decreased, when reduced to the minimum, there will be a "drops" prompt.
4. When listening to music, short press the volume - once times will jump to next song automatically, long press the volume - key, after
hearing "du" sound, loosen yours finger the level of volume will reduce, if long press the volume will reduce continuous, when reduce
to a minimum, there would be "drops" prompt.
The mode of LED
1. In charging , the red light bright long; After a full charge, the blue light on long
2. When the electric of battery is low, the red light flashing and has a voice prompt: "low battery"
3. In the state of pairing, The lights of red and blue alternating flashing.
4. When headphones in standby, the blue lights flashing slowly
The steps of Bluetooth headset connected to the phone
1. In the state of the headset turned off, pressed long the multifunction button for 6.5 seconds, The lights of red and blue alternating
flashing .enter into a state of matching by search.
2. Open cell phone's Bluetooth , click search until mobile search to the headset models.
3. Click the headphone model to Connect ,when headphone connect is successful, the headset indicator light will show the interval
for the blue light flashes lights, and has a voice prompt: "Bluetooth is connected.
Note: In pairs, in order to ensure successful matches .please try to keep the headset and mobile phone between in the range of 1 m ,
4.most mobile phones don't need enter password and can complete matching automatically, if want to enter the password ,please write
0000(original password is 0000)
here congratulations to you ,the connection is successful ,can listening to music and call now
The steps of mobile phone's one drag two connection
1. in the situation of Bluetooth headset turn off, pressing the multifunction button long about 6.5 seconds. when headset indicator light
appear the red light alternates with blue light flashing, enter into the search status.
2. Opening number one mobile phone's Bluetooth and searching Bluetooth device to seek the name of headset model, click on the
matching complete connection.
3. 平ressing the multifunction button long about 3.5 seconds ,until the red light flash there time quickly, shut down the headset and
turn off the Bluetooth of number one mobile phone.
4. Pressing the multifunction button long about 6.5 seconds once again until headset indicator light appear the red light alternates
with blue light flashing, enter into the search status.
5. Opening number two mobile phone's Bluetooth and searching Bluetooth device to seek the name of headset model, click on the
matching complete connection
6.Opening number one mobile phone's Bluetooth and connect the headset which had connected before, click to connect can be
complete one drag two.
keeping use around the mobile phone. Bluetooth working the range of line without blocking between your mobile phone and
headset as far as 10 meters . if exceed this range ,the tone quality may be decline or disconnect.
Learning how to reconnect :
1.For example when listening voice prompt Bluetooth disconnect ,please put the headset close to mobile phone on time ,your headset
can try to connect automatically in a minute
2. If the headset did not try to reconnect, please press lightly the multifunction button once or through the menu of mobile phone's
Bluetooth device to manually reconnect.
the function of voice prompt switch settings
This Bluetooth headset support Chinese or English voice prompt function, when need to switch the voice prompt , in the matching
condition ,Double-click and press the multifunction button can be switch voice prompt.

3/ 3
note :two kinds of voice switch cycles
FCC Warnings:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.