Istar Fast Wireless Charging Pad User manual

Fast Wireless Charging Pad
User Manual PI00505
www.istarproduct.co.uk/support

LED Indicator Status
Standby:
The LED indicator will light up blue when the unit is plugged in
and on standby.
Charging:
The LED indicator will ash.This means the charging pad is safely charging
your device.
Fully Charged:
The LED indicator will turn off once your device is fully charged.
Cleaning your Device
To safely clean your charging pad, wipe with a soft, dry cloth.
Never use any cleaning agents or abrasive materials.
Specications
Input: 5V/2A - 9V/1.67A
Output: 5V/1A - 9V/1.1A
Transmission distance: 5-8mm
Wireless power charging efciency: 85%
Working frequency: 110-205KHz
Fast charging function requires QC2.0 or higher power adaptor
Compatible with all
Qi enabled devices
www.istarproduct.co.uk/support

Charging your Device
PLEASE NOTE:
• Make sure your device is QI-compatible
• Case compatibility: Do not use a metal case
• If you are having issues charging, remove the case
Step:1
Connect the supplied micro
USB cable to a USB adaptor (A).
Then connect the other end
to the wireless charging pad.
Always place the charging
pad on a at, clean surface
such as a desk or side table.
The charging time will depend on the type of device you are using.
Your device will display the charging progress.You may remove your
device from the charging pad at any time.
Step:2
Place your Qi enabled device
directly onto the charging pad.
Refer to the diagram for
correct placement.
www.istarproduct.co.uk/support

Important Safety Instructions
Failure to follow the safety instructions can lead to re, electrical shock,
personal injury or property damage or damage to the product.
• Do not use this charger for anything other than its intended use.
• Keep the charger away from heat sources and direct sunlight.
• Do not expose the unit to extremely high or low temperatures.
• Use the product in a location with a temperature between 0°C - 35°C.
• Do not let the charger come into contact with water or any other
liquid. If the charger becomes wet, immediately unplug it from
the power source.
• Do not handle the charger or USB cable with wet hands.
• Do not let dust accumulate on the charger.
• Do not use the charger if it has been dropped or damaged.
• Repairs to electrical equipment should only be performed by
a qualied electrician. Improper repairs may place the user
at serious risk.
• If you have an electrical device, such as a pacemaker, please consult
your doctor before using this product.
• Do not place magnetic cards or similar items near the charger.
• Use the specied power source and voltage.
• Do not use a voltage converter/travel adaptor.
Technical Support:
www.istarproduct.co.uk/support
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist.Check with
your Local Authority for recycling advice.
© Philex Electronic Ltd. 2018 V1
www.istarproduct.co.uk/support