
8
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6058
Power/Mode
Long press to turn the jukebox on and o.
Short press to switch between CD, BT, FM and
AUX-IN modes.
Play/Pause
Press once to play, press again to pause
playback.
Stop
Stops playback.
Skip forward
Press once to skip to the next track.
Skip backward
Press once to skip to the previous track.
Volume –
Press to decrease the volume.
Volume +
Press to increase the volume.
CD PLAYER:
1. Short press the Power/Mode button on
the control panel or use the Mode button
on the remote control to select the CD
function. The LED screen will display ”cd”.
2. Press the Play/Pause button on the
remote or control panel to begin CD
playback.
3. Adjust the volume using the Volume+ and
Volume- buttons on the remote control.
4. Use the Skip forward and Skip backward
buttons to skip tracks.
Repeat:
Press the repeat button during playback to
select a repeat function.
Press the repeat button once to repeat 1 track.
Press the repeat button twice to repeat all
tracks.
Press the repeat button three times to turn o
the repeat function.
CD Programming:
Up to 20 tracks can be programmed in any
order. Before attempting to program, press the
Stop button.
1. Make sure the CD function has been
selected and CD playback has been
stopped using the Stop button.
2. Press the program button.
3. Select the track you wish to program
using the skip buttons.
4. Once the required track has been
selected, press the program button to
store the track or song into memory.
5. Repeat steps 3 & 4 to store additional
songs or tracks into memory.
6. When all the desired songs or tracks have
been programmed, press the Play/Pause
button to play the songs/tracks in the new
assigned order.
7. Press the Stop button to stop
programmed playback.
8. Remove all programmed memory by
pressing the stop button repeatedly.
Playing the FM radio:
1. Press the Power/Mode button on the
control panel or press the “MODE” button
on the remote repeatedly until you have
selected FM mode.
2. Ensure the FM Antenna has been fully
extended.
3. Press the “Skip forward” and “Skip
backward” buttons to select the desired
FM radio station.
4. Press and hold the “Skip forward” or “Skip
backward” buttons to scan the available
radio stations. The jukebox will stop
scanning once it picks up a radio station,
and save it to memory.
5. Long press the Play/Pause button while
the radio is playing to scan the available
radio stations and save them to memory.
6. You can also press the Prog button on the
remote control to save a radio station after
scanning.
7. Press the Stop button to play a previously
saved radio station.