Izzo Golf C80037 User manual
Usermanual
Specification
Productname Smartglasses
BluetoothnameC80037
GlasseslensPClenses
BluetoothspecificationV4.1+EDR
Frequencyrange2.402‐2.480GHz
BluetoothchipCSR
TransmissionpowerClass2
Bluetoothmodeheadset,A2DP,AVRCP
Transmissiondistance10meters
Musicplayingearphonetime10hours
phone‐callearphonetime10hours
Batterycapacity3.7V/250mAH
ChargevoltageDC5V/500mA
Chargingtime2‐3hours
Netweight 28g
Earphonepower 32Ω/0 . 5 W
workingtemperature‐15℃‐55℃
Storagetemperature‐20℃‐65℃
receivingsensitivity‐40dbm
audiorange20Hz‐20KHz
distortiondegree<=0.2%95dB
materialPA12
LensmaterialTr90
OperationInstruction
◆Power ON/OFF
Power on:long press the “ON/OFF/VOL+” button for 3 seconds until blue indicator
light blinks and earpieces make a “power on”sound.
Power off:long press the “ON/OFF/VOL+”button for 3 seconds until red indicator
light times and earpieces make a “power off”sound.
◆Pairing&Connection
Pairing:When sunglasses is off,long press the “ON/OFF/VOL+”button for 3 seconds
till blue and red indicator lights alternately enter pairing meanwhile earpieces
make a “Connect”sound and then pairing mood starts.
Activate the bluetooth function of your mobile phone,search for “C80037”,click
for connection if pairing is successful,music and phone calls would be delivered
to earpieces.
Automatic connection:If sunglasses has been connected to one Bluetooth device
once,next time when turn on the sunglasses,it connection to last device
automatically. sunglasses would power off if connection failed after 5 minutes.if
connection failed earpieces make a “ disconnect”sound. if connection success
earpieces make a “Connect”sound.
◆Volume UP/Down
Volume UP:Press “ON/OFF/VOL+” warning tong rises when it comes to “Max volume”.
Volume Down:Press “VOL-/Replay Call” no warning song.
◆The change curve adjustment
Next song: touch the "《 "
Last song: touch the " 》"
◆Music Operation
Play/Pause:Touch “II”for play/pause.
◆Phone-call Answering,Rejecting of Ending
Answer a phone-call:Touch “II”.
Reject a phone-call:Long Touch 2 seconds “II”.
End a phone-call:Touch "II".
◆Charging&Low battery indication
Charging:Use USB cable for charging, indicator light tums red,When it’s fully
charged,the blue indicator light bright.
Low battery indication:Red indicator light blinks and earpieces make a “battery
voltage Low”sound.
◆kindly remind
if your bluetooth device requies pairing code, please type 0000
◆safetyguide
※Please use this product under the local laws and requlations;
Caution safety whlie driving and cycling in wearing this product.
※To assure your safety,please do not listen to music in loud volume or in two
earpieces under some complicated environment.
※Keep it away from kids,because small parts may cause injuries,asphyxia and so on.
※Pay attention to the warning signs in some special places before using this
product ,such as hospital,gas station,and any potentially explosive environment.
※Do not disassemble or damage the intemal battery . handle the battery under the
local regulations. do not throw it away as waste.
◆Maintenance issues
※Turn off the power not using this product.
※Do not put this product in liquid or moist place.
※Do not put this product near fire,to avoid explosion.
※Do not bump this product against sharp objects, to avoid scratches or damage
※Plase put this product in a dry place
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that
may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
