J-Scale J-TALK User manual

Thank you for purchasing the J-Scale® J-Talk digital scale. Please read all operating instructions
carefully before use.This electronic scale is a precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
For further information or troubleshooting, please visit our website at www.jenningsscale.com
FEATURES & SPECIFICATIONS
kg / lb / st:lb
0.1g / 0.2lb
200kg / 440lb / 31:7st
1 x 9V battery
0˚C - 40˚C
Units
Weight graduation
Capacity
Power source
Temperature Range
High, Middle, Low
8 seconds
Simultaneous
Volume Control
Auto O
LCD/Talking
Error/Overload Message
Low Votage Message
PRECISION
100g

OPERATION INSTRUCTIONS
Weighing
1) Place the scale on a at hard oor.
2) Use your foot to tap the scale platform once and turn the scale on.
3) A voice message will tell you to wait.
4)When the display shows“0.0”. a voice message will tell you to step on the scale.
5) Now step on the scale and stand still.
6)Your weight will be displayed on the LCD and a voice will tell you the weight at the same time.
Caution
To avoid water from getting into the holes and damaging the speaker, please don’t step on the
scale when you are wet.
Changing the battery
Ensure +/- terminals are correctly connected.
DESCRIPTIONS
NON SLIP STRIPS
Included with the scale are non-slip strips to be installed onto the scale's platform.These help
prevent your feet from slipping o of the weighing surface, and possible slip-and-fall accidents.
Note that we strongly urge you to never step on the scale with wet feet regardless of use of these
strips, to prevent accidental slippage or an accident.
DANGER - SCALE SURFACE MAY BE SLIPPERY WHEN WET
Volume Control
(bottom of scale)
Unit Selector
(bottom of scale)
Value Units
Speaker