J-Tech Digital JTD-DVI-EX-196 User manual

DVI Extender 196FT
User Manual
Model: JTD-DVI-EX-196
1.0 Instructions
The DVI to RJ45 Extender use single cat-5e or cat-6(recommended)
cables up to 196ft instead of DVI cable to transmit high definition
signal, for cutting down cost. Long distance transmission of high
definition is very difficult because DVI cable is very expensive and
infrequent. The Extender is designed to supply for long distance
transmission of high definition signal.
2.0 FEATURES
1.HDCP 1.2 protocol compliant
2. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
3.Signal transmission :cat5e or cat-6(recommended) cables up to 196ft
instead of DVI cables are connected between TX and RX Extender.
4.Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
5.Audio support DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
6.No loss of quality
7.Installs in minutes
8.Need DC5V power supply(2pcs)
3.0 SPECIFICATION
Length of CAT-6 cable between Transmitter and Receiver----Up to 196ft(MAX)
DVI Input---------------------24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support input audio----DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
DVI Output-------------------24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output------------------------LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth------------------------------------------------------------------------165MHz
Max baud rate-----------------------------------------------------------------------4.95Gbps
Input Video signal ------------------------------------------------------0.5~1.5Volts p-p
Output DDC signal-------------------------------------------------------5Volts p-p (TT1L)
Input/Output DVI cable distance ---------- ≤65ft AWG26 HDMI standard cable
Max working current-------------------------------------------------------------------800mA
Power adapter format----Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range--------------------------------------------- (-15 to +55℃)
Operating Humidity range---------------------------5 to 90%RH (No Condensation)

4.0 INSTALLATION AND PRECAUTIONS
To avoid electric shock , product damage and to protect your safety , please
notice the following:
1.Please slowly plug or unplug signal cables and do not often plug , unplug ,
or shake them.
2.The equipment should not be placed under the sun , rain and damp or
unventilated environment.
3. Liquid items should not be placed on the equipment.
4.Do not install the equipment near heat sources such as fire , power ,
or other amplifiers that produce heat.
5.Do not insert the metal or other objects to the equipment in addition to
connecting cables to ports.
6.Do not demolish the equipment by yourself ; it should be maintained by
professional maintenance staff.
5.0 PACKAGING ACCESSORIES:
When first unpacking your extender please check to see if the following items
are included:
1.Power supply-----------------------2 Pcs
2.User manual------------------------1 Pcs
3.DVI Transmitter--------------------1 Pcs
4.DVI Receiver-----------------------1 Pcs
6.0 Operating and Connecting:
1.Connect the DVI input source via DVI cable to the Sender(TX) DVI Input;
2.Connect the CAT5e/6 Cable between output of Transmitter(TX) and
input of Receiver(RX)
3.Connect the output of Receiver to DVI display
4.Connect DC5V power supply to the DVI over CAT5E/6 196ft TX&RX