J-Tech Digital JTD-322 User manual

J-TECH DIGITAL
J-TECH DIGITAL SUPPORT TEAM
1-888-610-2818
[e-mail]
JTD-322 JTD18G-H5CH GUIDE

JTD-322 JTD18G-H5CH GUIDE
The JTD18G-H5CH audio extractor "extracts" the audio signal from an HDMI input
and converts it into a 2 channel L/R analog stereo output or SPDIF optical multi-
channel output.
This guide provides the instructions you will need to properly setup, connect and
operate your JTD18G-H5CH audio extractor.
KEY FEATURES
❖HDMI 2.0b (18Gbps), HDCP 2.2 compliant
❖Supported resolutions up to 4K@60Hz (YUV444)
❖10bits HDR pass through
❖Supports HDMI (HBR) audio pass through
❖Supports CEC bypass
❖Audio sample rates up to 192kHz
Panel Descriptions

FRONT PANEL
1. DC 5V: This unit uses a DC 5V/1A power adapter
2. POWER LED: This LED will illuminate to indicate that the unit is receiving
power
3. EDID SWITCH Allows users to select the audio EDID (Extended Display
Identification Data) format according to TV, 5.1 Channel, or 2 CH:
❖TV: Bypass or pass-through mode. The audio and video EDID will come
from the HDMI output device that is connected to the extractors HDMI
output port. (NOTE: This mode will not support Dolby Digital+. When in
5.1CH mode, audio output will only be from the HDMI, and SPDIF output
ports. 5.1 will not be supported through the L/R analog output.)
❖5.1 CH: This mode relays EDID for 5.1 channel audio from HDMI and
SPDIF optical output ports.
❖LPCM 2CH: Sends audio EDID requesting that the source device outputs
2CH audio. (NOTE: When in 2CH mode, audio output will only be
stereo/PCM from the HDMI, SPDIF, and L/R analog output ports.)
4. HDMI IN: This port is used to input a source device for audio extraction.
Examples include a Streaming device, Blu-Ray/DVD player, PC/MAC
computer, and Set-Top Cable Box.
5. LINK LED: This LED will illuminate when an HDMI input signal is detected.

REAR PANEL
1. HDMI OUT: Output source HDMI audio/video.
2. L/R OUT: Connect to an audio component (speaker, amplifier, etc.) or TV
L/R input.
3. SPDIF/OPTICAL: Output PCM/2CH or 5.1 Dolby Digital audio formats
(NOTE: The SPDIF/Optical output will support PCM/2CH, and 5.1 Dolby
Digital audio format. This audio output will not support 5.1 Dolby Digital+.)

Application Description