TeleEye MX677-HD User manual

Quick Start Guide
TeleEye MX677-HD Network Camera
This Quick Start Guide will guide you how to install and configure the TeleEye MX677-HD etwork Camera for remote
video monitoring.
Camera In tallation
Step 1. Draw the framework and drill 4 holes on the wall for mounting the wall mount bracket.
Step 2. Connect the wires as follow and lock the upper housing
Step 3. Set in the PTZ Core and close the cover as follow.
1

IP Setup Utility
Step 1. After installing sureSIGHT and turning on the etwork Camera, select the “Run TeleEye IP Setup
Utility” from the windows start menu.
Step 2. Search the target camera by its serial number, and changes the network settings of the camera on the
right side of the window. Press [Apply] button to confirm the settings.
Step 3. Changes the network settings of the camera on the right side of the window, including IP, ports, mask,
etc. Press [Apply] button to confirm the settings.
Step 4. Enter the password to save the information when prompted.
[Note] The default password is “000000”.
2

Live Monitoring with Web-Brow er
Step 1. Open a web browser on a PC and type in the IP address of the etwork Camera.
Step 2. Select the connection type and input the password.
[Note] The default password is “000000”.
Step 3. Click the [Connect] button to connect the selected video stream. Video will then be displayed on the
browser as follow.
3

Live Monitoring with ureSIGHT
Step 1. After installing sureSIGHT and turning on the etwork Camera, select the “Run sureSI HT Lite” from
the windows start menu.
Step 2. Input the password in the password dialogue box, and then click the button.
(Skip this step if you are not upgrade from old version)
[Note] The default password for administrator is “000000”.
Step 3. Click the [Search ite ] icon to connect the network camera.
4

Step 4. Click on the target cameras by their serial number or site name, and click [Next>>] button.
5

Step 5. Fill in all the site information and click [Next>>] button.
[ ote] the default password is “000000”.
6

Step 6. Select the connection stream and click [Fini h] button.
7

[Reference] For detail operations, please refer to the sureSI HT user manual.
END
8