Jabra Elite 65e User manual

User manual
Elite 65e
Jabra

5
ENGLISH
1. Welcome
Thank you for using the Jabra Elite 65e. We
hope you will enjoy it!
Jabra Elite 65e features
• Active Noise Cancellation (ANC) to reduce
disturbances
• Power battery to fuel all-day use (up to 13
hours on a 2 hour charge)
• Dual-connectivity to two Bluetooth devices,
enabling you to take calls and listen to music
on two devices using the same earbuds
• Up to 10 meters / 33 feet of wireless range
for true mobility
• Vibrating call alert to ensure you never miss
a call
• HearThrough feature: Hear the
conversations around you at the touch of a
button

6
ENGLISH
2. Jabra Elite 65e
overview
jabra
jabra
Vibrating neckband
Microphone
Audio mode LED
Cycle between
ANC and Hear-
Through modes
Magnetic zone
Mute
Voice assistant
Power on/o (hold)
Answer/end call
Play/pause music
Battery/
Bluetooth LED
Volume down
Previous track (hold)
Volume up
Next track (hold)
2.1 Included accessories
EarGels
R
L
R
L
R
L
EarWings
USB charging cable

7
ENGLISH
3. How to wear
Jabra Elite 65e is designed to be worn around
the neck.
The earbuds have three microphones: one on
each of the earbuds and one on the cable. For
the optimal call experience, position the
microphone on the cable as close to your
mouth as possible, and wear both earbuds in
your ears.

8
ENGLISH
3.1 Getting the correct fit
The earbuds are supplied with three EarGel
and EarWing sizes: large, medium and small.
R
L
R
L
R
L
Small Small
Medium Medium
Large Large
It is highly recommended to mix and match the
different EarGel and EarWing sizes to find the
best combination for your ear. The correct fit
will feel tight and will seal out background
noises.

9
ENGLISH
3.2 Attaching the EarWings and
EarGels
1. To attach an EarWing, align the indent on the
EarWing with the ridge on the earbud (as
illustrated), and stretch the EarWing over the
earbud. It will fit perfectly in the groove
when properly attached.
2. Firmly press the EarGel onto the earbud,
ensuring it is angled correctly (as illustrated).
1
2

10
ENGLISH
3.3 Using the magnetic earbuds
The earbuds are magnetic, and connect
together for convenient cable and power
management. When the earbuds are
connected, your music will be paused or your
call will be ended. Separating the earbuds will
answer an incoming call. Go to section 6.1. for
more information.

11
ENGLISH
4. How to charge
To charge the earbuds, connect a USB charging
cable to the USB charging port on the
neckband. It is recommended to charge the
earbuds using the supplied Jabra charging
cable, however it is possible to charge the
earbuds using your smartphone charger.
It takes approx. 2 hours to fully charge the
earbuds.
Note: Always clean and dry the USB charging port before
charging the earbuds. It is recommended to recharge the
earbuds at least once a month.

12
ENGLISH
4.1 What the LEDs mean
Status LED ANC/
HearThrough
LED
Full
Medium
Low
Very low
Pairing mode
Resetting
ANC on
HearThrough
on

13
ENGLISH
5. How to connect
5.1 Power on/o
On: Hold the Multi-function button for 1
second. The LED will flash green, and the
neckband will vibrate.
Off: Hold the Multi-function button for 3
seconds. The LED will flash red, and the
neckband will vibrate.
On O