Jabra BT 800 Quick start guide

Jabra BT800 Software upgrade
- a step-by-step guide
Main features
•Faster audio transfer for Sony Ericsson phones
•Faster speech channel handling – the call is transferred to
the headset faster
•Faster reaction on Key-presses during incoming call
•The missing international prefix "+" is displayed in your
caller list thus allowing you to dial out from your Jabra
BT800
PLEASE READ CAREFULLY BEFORE
PROCEEDING
The Software Wizard will work automatically and does not require any
user input during the process.
Please do not disconnect your device during upgrade.
If you are using a portable PC ensure that it is plugged in to a power
socket.
Please remove any Bluetooth devices from your PC (e.g. USB dongle,
Bluetooth hub)
Please disable integrated Bluetooth devices on your PC (e.g. Bluetooth
radio)
In general: avoid interruptions. If the upgrade procedure is
interrupted, your headset may be rendered unusable.

Only use this software Wizard with a Jabra BT800. Using a Wizard for
another product may render your device unusable.
STEP-BY-STE
We recommend you download and print these instructions for handy
reference
STEP 1
• Connect your Jabra BT800 to your PC using the USB cable provided.
STEP 2
• To update your software unzip the attached software, then save to
your Desktop, then 'Run'.
STEP 3
•Place your Jabra BT800 in ‘SW download mode’ using the following
procedure:
•Press and hold the ‘End’ button, at the same time press and
hold the pairing button using the supplied stylus. Hold for four
seconds before release
•Continue to hold the ‘End’ button until the display reads ‘DFU
mode’ then release.

The wizard will now upgrade your headset automatically
Your Jabra BT800 headset is ready for use when the window says:
‘Successful upgrade’
•Click ‘Finish’