Jabra Evolve 75 SE User manual

Jabra Evolve 75 SE - UC Stereo
How do I pair my Jabra Evolve 75 with my mobile device?
To pair your Jabra Evolve 75 with your smartphone, tablet, or other
handheld mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. To enter pairing mode, hold (3 seconds) the On/off/Bluetooth switch
in the Bluetooth position until the LED flashes blue. Alternatively,
wear the headset to hear the pairing instructions.
The headset is now ready to pair with your mobile device.
3. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Evolve 75 from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
23/02/2024 12:49
https://www.jabra.ie/supportpages/jabra-evolve-75se/7599-848-109/faq/19a6ed4b-
86f5-402a-b669-d17dd2b6a5b9
Page 1 of 2

Applicable products
Jabra Evolve 75 SE -
MS Stereo
Jabra Evolve 75+ UC
Stereo
Jabra Evolve 75 MS
Stereo
Jabra Evolve 75 SE -
MS Stereo with
Charging Stand
Jabra Evolve 75+ MS
Stereo
Jabra Evolve 75 UC
Stereo
Jabra Evolve 75 SE -
UC Stereo
Jabra Evolve 75 SE -
UC Stereo with
Charging Stand
23/02/2024 12:49
https://www.jabra.ie/supportpages/jabra-evolve-75se/7599-848-109/faq/19a6ed4b-
86f5-402a-b669-d17dd2b6a5b9
Page 2 of 2