Jabra GO 6470 User manual

Jabra Pro 9460 Mono
How to connect my Jabra PRO 9400 / GO 6470 with Siemens
OpenStage 30,40,60,80
Prerequisite:
Jabra PRO 9460 / Jabra PRO 9470 + Jabra LINK 14201-10
In combination with one of the following phones:
Siemens OpenStage 30/40/60/80
Connection:
1. Plug the 1-sided end of the DHSG cable marked blue into the phone
socket marked with a "headset" symbol.
2. Insert the RJ9 plug of the DHSG cable into the headset base socket
marked with a "phone" symbol and the RJ45 plug into the socket
marked with "AUX".
Then follow the instructions of the Jabra PRO 9400 / Jabra GO 6470 base
SmartSetup Wizard.
Select phone settings, "Desk phone", then "Connect to a desk phone?",
"Manual".
10/06/2022 16:41
https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707-
102/faq/6d386e88-c460-4f09-8ac6-00eb36f71030
Page 1 of 3

Select adapter type "DHSG"
Base setup:
Set the phone setup switch to position "A".
Microphone volume setting:
We recommend setting the microphone volume to 6 out of 13.
Guided set-up:
As part of the installation you can dial into the local Jabra Setup Server
that takes care of configuring the audio path. Please follow the
instructions shown on the display. If your Jabra Setup Server is
unavailable, please contact your local Jabra support team.
Phone setup:
10/06/2022 16:41
https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707-
102/faq/6d386e88-c460-4f09-8ac6-00eb36f71030
Page 2 of 3

Important: For the equipment software 3.18 the headset operation must
be set up additionally on the phone.
OpenStage 30/40: Menu> Audio Accessories> Headset> Cordless
OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless
Important: The dial tone signal in the headset is transmitted only if the
standard ringtones are used. No ringtone is transmitted for mp3 ringtones.
10/06/2022 16:41
https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707-
102/faq/6d386e88-c460-4f09-8ac6-00eb36f71030
Page 3 of 3