Jabra GN9350e User manual

How to connect my Jabra GN9350e with Siemens OpenStage
30, 40, 60, 80
Jabra GN9350e MS
Prerequisite:
Jabra GN9350 + Jabra LINK 14201-10
In combination with one of the following phones:
OpenStage 30/ 40 / 60 / 80
Full function from software version 1.40 (multiple dial tone signal
transfer)
Connection:
1. Plug the 1-sided end of the DHSG cable marked blue into the socket of
your OpenStage phone marked with the “headset” symbol.
2. Plug the RJ10 plug into the socket marked with a “phone” and the RJ45
plug into the base socket of the Jabra GN9350 marked with "AUX".
Software setup:
In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK
button to confirm the software setting.
Base setup:
Set the phone setup switch to "A".
11/05/2021 15:31
/supportpages/jabra-gn9350e/9356-607-501/faq/9c87ed04-1a34-4175-8eb5-
2d9c86fc39c4
Side 1 av 3

Microphone level setup:
We recommend setting the microphone volume in the LCD display to 7
out of 12.
Headset answer/end:
As soon as the dial tone signal can be heard in the headset, you can answer
the call by pressing the "answer/end” button" on the headset; by pressing
again the call is ended.
Phone setup:
Important: For equipment software 3.18, the headset operation must be
set up additionally at the phone.
11/05/2021 15:31
/supportpages/jabra-gn9350e/9356-607-501/faq/9c87ed04-1a34-4175-8eb5-
2d9c86fc39c4
Side 2 av 3

OpenStage 40: Menu> Audio Accessories> Headset> Cordless
OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless
Important: The dial tone signal in the headset is transmitted only if the
standard ringtones are used. No ringtone is transmitted for mp3 ringtones.
11/05/2021 15:31
/supportpages/jabra-gn9350e/9356-607-501/faq/9c87ed04-1a34-4175-8eb5-
2d9c86fc39c4
Side 3 av 3