Jabra PERFORM 45 User manual

PERFORM 45
USER MANUAL
Technology for life’s new rhythm

© 2022 GN Audio A/S. All rights reserved. Jabra®is a
trademark of GN Audio A/S. The Bluetooth®word mark and
logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by GN Audio A/S is under
license.
Declaration of Conformity can be found on
www.jabra.com/doc
Made in China
MODEL: OTE980

3
ENGLISH
1. Welcome.........................................5
2. Jabra Perform 45 overview........6
2.1 Included accessories
2.2 Optional accessories
3. How to wear...................................8
3.1 Selecting an EarGel
3.2 How to get the perfect fit
4. How to charge............................ 10
5. How to connect.......................... 12
5.1 Power on
5.2 Power o
5.3 Pair with your phone using Bluetooth
5.4 Pair with your phone using NFC
6. How to use ................................. 15
6.1 Calls
6.2 The Customizable button
6.3 Multiple call handling
6.4 Voice controls
6.5 Multipoint mode
6.6 Reset headset
7. Jabra Direct app......................... 20

4
ENGLISH
8. Support ........................................ 21
8.1 FAQ
8.2 How to care for your headset
8.3 How to clean your headset

5
ENGLISH
1. Welcome
Thank you for using the Jabra Perform 45. We
hope you will enjoy it!
Jabra Perform 45 features:
• Small, lightweight, and discreet, so you
always look approachable to customers
• 80% noise-cancelling microphone and
crystal-clear sound keeps communication
smooth
• Push-to-Talk lets you instantly communicate
with colleagues
• Easy to set up and intuitive to use, with a
durable, simple-to-sanitize design
• Up to 20 hours Push-to-Talk usage, and up
to 100m / 300ft wireless range

6
ENGLISH
2. Jabra Perform 45
overview
2.1 Included accessories
USB cable
EarGels
Small Medium Large
Customizable button
Power on/o (hold)
Volume up
Volume down
Microphones
USB-C charging port
• Push-To-Talk
• Voice control
(standby)
• Mute (in a call)
• Speed dial or
check battery level
• Answer/end call
Reject call (hold)
Status LED
Personalized label
location

7
ENGLISH
2.2 Optional accessories
Optional accessories are available at jabra.
com/accessories
Jabra Perform Charging Stand, 5-Bay

8
ENGLISH
3. How to wear
The headset can be worn on the left or right
ear.
Right Left
To wear the headset on the other ear, rotate
the microphone horizontally to the other side.
Then swivel the microphone up and over and
point it towards your mouth.

9
ENGLISH
3.1 Selecting an EarGel
It is important to wear the headset with the
most comfortable EarGel size for your ears.
This will ensure the best audio experience.
Small Medium Large
3.2 How to get the perfect fit
For the best audio quality and comfort, the
eargel should fit firmly in your ear, but should
not be squeezed into your ear canal.

10
ENGLISH
4. How to charge
To charge the headset, connect the USB
charging cable to the headset’s USB charging
port. It is recommended to charge the headset
using the supplied charging cable. It takes up
to 140 minutes to fully charge the battery.

11
ENGLISH
While charging, the LED indicator shows the
charging status. Red indicates the headset is
charging. Blue indicates the headset is fully
charged.
Fully charged
Charging
Low battery

12
ENGLISH
5. How to connect
5.1 Power on
Press and hold the Multi-function button for 1
second until the LED flashes blue and you hear
“Power on”.
Power
on
1 sec
5.2 Power o
Press and hold the Multi-function button for 3
seconds until the LED flashes red and you hear
“Power off”.
Power
o
3 sec

13
ENGLISH
5.3 Pair with your phone using
Bluetooth
1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for
approx. 6 seconds until you hear “Pair mode”
and the LED flashes red and blue. The
headset is now ready to pair.
3. Go to the Bluetooth menu on your phone
and select the Jabra Perform 45 from the list
of available devices.
1 2
6 sec
Pair
mode

14
ENGLISH
5.4 Pair with your phone using NFC
1. Ensure your headset is powered on, and that
NFC is enabled on your phone.
2. Place the NFC zone of your phone against
the NFC zone of the headset until your
phone confirms the connection.
Please note that not all phones support NFC
pairing.
NFC Zone

15
ENGLISH
6. How to use
Multi-function
button
Volume up
button
Volume down
button
Customizable button
6.1 Calls
What the buttons do
Answer call Press the Multi-function
button or say “Answer”
End call Press the Multi-function
button
Reject call
Press and hold (2 sec)
the Multi-function
button or say “Ignore”
Activate Voice
Assistant (i.e. Siri,
Google Assistant)
Press the Multi-function
button when not on
a call

16
ENGLISH
Adjust volume
Press the Volume up or
Volume down button,
when listening to music
or on a call.
Turn LEDs on/o
Press both the Volume
up and Volume down
buttons simultaneously
Transfer audio
from headset to
phone
While on a call, press and
hold (2 sec) the Volume
down button to transfer
to the call audio to your
paired phone. Repeat to
transfer the call audio
back to your headset.
Redial last
number
Press and hold (1 sec)
the Volume down button
until you hear a beep.
Mute/unmute
microphone
Press the Customizable
button when on a call.
Alternatively, press and
hold (2 sec) the Volume
up button.
Mute/unmute
microphone and
speaker during
a call
Swivel the microphone
up during a call to mute
the microphone and
speaker. Swivel the
microphone down to
unmute.

17
ENGLISH
6.2 The Customizable button
By default, the Customizable button activates
the voice controls, or mutes the microphone
when on a call. However, the button can be
configured for other functions, such as Push-
To-Talk, speed dial, access a second paired
mobile device, or to check the battery level.
To reconfigure the Customizable button,
download and use Jabra Direct.
6.3 Multiple call handling
The headset can accept and handle multiple
calls at the same time.
Multiple call handling
End current
call and answer
incoming call
Press the Multi-function
button to end the
current call. Then press
the Multi-function
button to answer the
incoming call
Put current call
on hold and
answer incoming
call
Press the Multi-function
button twice
Reject incoming
call when on
a call
Press and hold (2 sec)
the Multi-function
button

18
ENGLISH
6.4 Voice controls
The headset recognizes English voice
commands, enabling call handling without
touching the headset.
Press the customizable button (when not on a
call) to activate the voice controls. For a list of
available commands, say: “What can I say?”
List of voice controls:
• “Answer” – answers an incoming call
• “Ignore” – rejects an incoming call and sends
it to voicemail (if available)
• “What can I say?” – announces a list of
available commands
• “Pair mode” – puts the headset into pairing
mode
• “Am I connected?” – verifies that the headset
is connected to a device
• “Check battery” – announces battery levels
for the headset and paired device (if
applicable)
• “Redial” – redials the last outgoing call
• “Callback” – calls the last incoming call
• “Cancel” – cancels voice control

19
ENGLISH
6.5 Multipoint mode
The headset can pair with up to 8 phones and
connect to two at once (Multipoint mode).
To connect to two phones, pair with each
separately (refer to section 5).
The headset will monitor both phones and
enable you to answer a call on either one using
the headset.
If you are on a call and the other phone receives
a call, you will hear a notification in the headset.
6.6 Reset headset
Resetting the headset clears the list of paired
devices and resets all settings.
1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume
down button and the Customizable button
until you hear two beeps.
3. Power off the headset.
You will need to re-pair the headset with your
phone.

20
ENGLISH
7. Jabra Direct app
Jabra Direct is a desktop application designed
to support, manage and enable optimal
functionality for Jabra devices.
Download the latest free version from jabra.com/direct