Jabra PERFORM 45 User manual

PERFORM 45
USER MANUAL
Technology for life’s new rhythm

5
ENGLISH
1. Welcome
Thank you for using the Jabra Perform 45. We
hope you will enjoy it!
Jabra Perform 45 features:
• Small, lightweight, and discreet, so you
always look approachable to customers
• 80% noise-cancelling microphone and
crystal-clear sound keeps communication
smooth
• Push-to-Talk lets you instantly communicate
with colleagues
• Easy to set up and intuitive to use, with a
durable, simple-to-sanitize design
• Up to 20 hours Push-to-Talk usage, and up
to 100m / 300ft wireless range

6
ENGLISH
2. Jabra Perform 45
overview
2.1 Included accessories
USB cable
EarGels
Small Medium Large
Customizable button
Power on/o (hold)
Volume up
Volume down
Microphones
USB-C charging port
• Push-To-Talk
• Voice control
(standby)
• Mute (in a call)
• Speed dial or
check battery level
• Answer/end call
Reject call (hold)
Status LED
Personalized label
location

7
ENGLISH
2.2 Optional accessories
Optional accessories are available at jabra.
com/accessories
Jabra Perform Charging Stand, 5-Bay

8
ENGLISH
3. How to wear
The headset can be worn on the left or right
ear.
Right Left
To wear the headset on the other ear, rotate
the microphone horizontally to the other side.
Then swivel the microphone up and over and
point it towards your mouth.

9
ENGLISH
3.1 Selecting an EarGel
It is important to wear the headset with the
most comfortable EarGel size for your ears.
This will ensure the best audio experience.
Small Medium Large
3.2 How to get the perfect fit
For the best audio quality and comfort, the
eargel should fit firmly in your ear, but should
not be squeezed into your ear canal.

10
ENGLISH
4. How to charge
To charge the headset, connect the USB
charging cable to the headset’s USB charging
port. It is recommended to charge the
headphones using the supplied charging cable.
It takes up to 140 minutes to fully charge the
battery.

11
ENGLISH
While charging, the LED indicator shows the
charging status. Red indicates the headset is
charging. Blue indicates the headset is fully
charged.
Fully charged
Charging
Low battery

12
ENGLISH
5. How to connect
5.1 Power on
Press and hold the Multi-function button for 1
second until the LED flashes blue and you hear
“Power on”.
Power
on
1 sec
5.2 Power o
Press and hold the Multi-function button for 3
seconds until the LED flashes red and you hear
“Power off”.
Power
o
3 sec

13
ENGLISH
5.3 Pair to your smartphone
1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for
approx. 6 seconds until you hear “Pair mode”
and the LED flashes red and blue. The
headset is now ready to pair.
3. Go to the Bluetooth menu on your
smartphone and select the Jabra Perform 45
from the list of available devices.
1 2
6 sec
Pair
mode

14
ENGLISH
5.4 Connect to your smartphone using
NFC
1. Ensure your headset is powered on, and that
NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone
against the NFC zone of the headset until
your smartphone confirms the connection.
Please note that not all phones support NFC
pairing.
NFC Zone

15
ENGLISH
6. How to use
Multi-function
button
Volume up
button
Volume down
button
Customizable button
6.1 Calls
What the buttons do
Answer call Press the Multi-function
button or say “Answer”
End call Press the Multi-function
button
Reject call
Press and hold (2 sec)
the Multi-function
button or say “Ignore”
Activate Voice
Assistant (i.e. Siri,
Google Assistant)
Press the Multi-function
button when not on
a call

16
ENGLISH
Adjust volume
Press the Volume up or
Volume down button,
when listening to music
or on a call.
Turn LEDs on/o
Press both the Volume
up and Volume down
buttons simultaneously
Transfer audio
from headset to
smartphone
While on a call, press and
hold (2 sec) the Volume
down button to transfer
to the call audio to your
paired smartphone.
Repeat to transfer the
call audio back to your
headset.
Redial last
number
Press and hold (1 sec)
the Volume down button
until you hear a beep.
Mute/unmute
microphone
Press the Customizable
button when on a call.
Alternatively, press and
hold (2 sec) the Volume
up button.
Mute/unmute
microphone and
speaker during
a call
Swivel the microphone
up during a call to mute
the microphone and
speaker. Swivel the
microphone down to
unmute.

17
ENGLISH
6.2 The Customizable button
By default, the Customizable button activates
the voice controls, or mutes the microphone
when on a call. However, the button can be
configured for other functions, such as push-
to-talk, speed dial, access a second paired
mobile device, or to check the battery level.
To reconfigure the Customizable button,
download and use Jabra Direct.
6.3 Multiple call handling
The headphones can accept and handle
multiple calls at the same time.
Multiple call handling
End current
call and answer
incoming call
Press the Multi-function
button to end the
current call. Then press
the Multi-function
button to answer the
incoming call
Put current call
on hold and
answer incoming
call
Press the Multi-function
button twice
Reject incoming
call when on
a call
Press and hold (2 sec)
the Multi-function
button

18
ENGLISH
6.4 Voice controls
The headset recognizes English voice
commands, enabling call handle without
touching the headset.
Press the customizable button (when not on a
call) to activate the voice controls. For a list of
available commands, say: “What can I say?”
List of voice controls:
• “Answer” – answers an incoming call
• “Ignore” – rejects an incoming call and sends
it to voicemail (if available)
• “What can I say?” – announces a list of
available commands
• “Pair mode” – puts the headset into pairing
mode
• “Am I connected?” – verifies that the headset
is connected to a device
• “Check battery” – announces battery levels
for the headset and paired device (if
applicable)
• “Redial” – redials the last outgoing call
• “Callback” – calls the last incoming call
• “Cancel” – cancels voice control

19
ENGLISH
6.5 Multipoint mode
The headset can pair to 8 smartphones and
connect to two at once (Multipoint mode).
To connect to two smartphones, use the
normal pairing process separately for each
smartphone (refer to section 5).
The headset will monitor both smartphones
and enable you to answer a call on either one
using the headset.
If you are on a call and the other smartphone
receives a call, you will hear a notification in the
headset.
6.6 Reset headset
Resetting the headphones clears the list of
paired devices and resets all settings.
1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume
down button and the Customizable button
until you hear two beeps.
3. Power off the headset.
You will need to re-pair the headset to your
smartphone.

20
ENGLISH
7. Jabra Direct app
Jabra Direct is a desktop application designed
to support, manage and enable optimal
functionality for Jabra devices.
Download the latest free version from jabra.com/direct

21
ENGLISH
8. Support
8.1 FAQ
View the FAQs at jabra.com/help/perform45
8.2 How to care for your headset
• To prevent the depletion of the battery
lifetime or capacity, avoid storing the headset
in hot or cold environments, such as a closed
vehicle in summer or in winter conditions.
• For daily sanitization, 70% isopropyl alcohol
wipes are recommended.
• When exposed to water, allow the headset
sufficient time to dry. It may take up to one
hour for the headset to dry thoroughly.
• Do not store the headset for extended
periods of time without recharging them
(max. three months).

22
ENGLISH
8.3 How to clean your headset
1. Apply normal dish soap and water to a cloth,
making sure to wring out any excess liquid so
the cloth is not dripping wet. Use soap and
water only; do not use strong cleaning
agents.
2. Gently wipe the headset with the wet cloth,
making sure the headset is clean with no
layer of suds on the surface.
3. Let the headset rest for at least one minute.
4. Wipe the headset clean with a cloth
dampened with water only.
5. Allow the product to dry.