Jabra PRO 9450 User manual

Jabra Pro 9450 Mono Flex
How to connect my Jabra PRO 9450 with Aastra 6753i, 6755i,
6757i
Prerequisite:
Jabra PRO 9450 + Jabra LINK 14201-10 + Aastra DHSG cable kit (only
available from Aastra)
In combination with one of the following phones:
Aastra 53i / 55i / 57i / 57iCT
Aastra 6753i / 6755i / 6757i / 6757i CT
From phone firmware 2.5.1.2000 or higher.
Connection:
Aastra DHSG cable:
1. Insert the split end of the Aastra DHSG cable into your phone as
follows.
2. Insert the RJ9 plug (marked green) into the "headset" socket and the
RJ45 plug (marked yellow) into the socket for the expansion module.
14/10/2022 13:07
https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-
103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d
Page 1 of 4

3. Insert the 1-sided end of the Aastra cable marked in blue into the RJ45
adapter.
GN Netcom DHSG cable:
1. Now insert the 1-sided end of the GN Netcom DHSG cable marked in
blue into the free socket of the RJ45 adapter.
2. Connect the split end of the DHSG cable as follows with the Jabra PRO
94x0e base. Insert the RJ9 plug into the socket identified with the
complete "phone" symbol and the RJ45 plug into the socket identified
with "AUX" on the Jabra PRO 94x0 base.
You now have the option of setting up the headset on your phone via the
automatic or manual configuration.
Automatic configuration:
To start the automatic configuration, ask someone to call you on this
phone and wait at least 10 seconds before taking the call. The appropriate
EHS mode should now be installed.
If the automatic configuration has not worked, please select DHSG mode
manually.
14/10/2022 13:07
https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-
103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d
Page 2 of 4

Base setup:
Set the phone set-up switch to position "A".
Microphone level setup:
Remove the cover from the base of the Jabra PRO 9450 and make a call
with the headset, to a colleague for example. If you are too loud or too
quiet to the person you are calling, please use the volume adjuster until
you achieve the optimum volume level.
Phone setup:
With the version 2.5.1.2000, the DHSG mode is deactivated by default and
must be activated via the Aastra.cfg or mac.cfg with the command dhsg:
1.
From version 2.5.2 Options > Default settings > Audio settings > DHSG >
On
Audio mode in the phone settings must be set to "Headset / Speaker":
Options > Default settings > Audio settings > Audio mode > Headset /
14/10/2022 13:07
https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-
103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d
Page 3 of 4

Speaker
Remote call control in combination with an expansion keypad is not
supported.
14/10/2022 13:07
https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-
103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d
Page 4 of 4