Jabra Engage 75 Mono User manual

Jabra Engage 75 Mono
How do I pair my Jabra Engage 75 with my mobile device?
You can pair and connect with two mobile devices.
Pair using Bluetooth
1. Plug the base into a power supply using the AC adapter supplied.
2. Tap to open the Settings menu, and tap to navigate down to
Mobile device.
3. Tap to select New.
4. Follow the onscreen pairing instructions to pair your mobile device with
the headset.
Pair using NFC
29/06/2021 17:05
/supportpages/jabra-engage-75/9556-583-117/faq/ec5e4379-7bfc-4ff5-9414-
3742060f5f2c
Page 1 of 2

1. Plug the base into a power supply using the AC adapter supplied.
2. Ensure NFC is enabled on your mobile device. Hold the mobile device
against the NFC logo on the base and follow the instructions on your
mobile device to complete the pairing.
Note that the location of the NFC zone on the mobile device may vary.
Refer to the user manual for the mobile device for more information.
Note: After pairing, the headset will automatically try to connect to your
mobile device when it is turned on and within range of the base, and
Bluetooth is enabled.
Pairing with a third mobile device will replace the pairing of one of the
previously paired mobile devices, if it is not currently connected to the
base.
29/06/2021 17:05
/supportpages/jabra-engage-75/9556-583-117/faq/ec5e4379-7bfc-4ff5-9414-
3742060f5f2c
Page 2 of 2