1. Jabra Noise Guide
2. 8 GB USB key with software
3. Power adaptor with EU, UK and US plugs
4. USB cable for connecting the Noise Guide
to the power adaptor or a PC
CONGRATULATIONS ON YOUR NEW
JAB RA NOISE GU I D E
PRE SETTING
Your Noise Guide is pre-set for ”Noisy Office”. You can change settings in the software.
Green Ear : < 60 dB
Yellow Ear : 60 – 70 dB
Red Ear : > 70 dB
2
1
3
4
1. Insert USB key to download log data from
Jabra Noise Guide and offline configuration
of the device.
2. USB entrance for connecting the Noise Guide
to the power adaptor or a PC.
SOFTWARE
The software used for configuration and
viewing measurements is installed with the
included USB-key.
When the software installation is completed,
open the software and click on ”User Ma-
nual” in the left menu to download the user
manual.
In order to fully understand the features and
possibilities of Jabra Noise Guide, we advise
you to read the user manual carefully before
you start using your Jabra Noise Guide.
You can also download the software and the
user manual from our web site:
www.soundear.com/downloads
To ensure that your software version is al-
ways up-to date, we strongly advise you to
check the web site for the latest versions
frequently.
Please Note! To set the internal clock
in Jabra Noise Guide, connect the device to
your PC with the USB cable. The time with
then synchronize with your PC.
If you have questions or comments, please
feel free to contact us on:
soundear@soundear.com Jabra Noise Guide. software.
1
2
