JABSCO VR050-2022 User manual

• Designed for refuelling medium sizes diesel
powered vehicles [typical tank sizes 200 - 500
litres (50 - 200 gallons)] from drums.
• Suitable for mounting to the following equipment:
Excavators, Cranes, Road rollers (compactors),
Pavers, Agricultural machines, Generators,
Helicopters.
• Suitable for diesel fuel, Kerosene, Paraffin,
Hydraulic oils, Oils up to 150 centi Stokes (750
Saybolt Universal) viscosity.
Temperature Range : -30°C to +50°C (-22°F to +104°F)
Pump Body : Cast Iron
Rotor : Sintered Iron
Vanes : Sintered Bronze
Shaft : Carbon Steel
Seal : Nitrile Lip Seal.
Ports : Vertical ¾¨ BSP or 25mm hose adaptors (1¨).
Motor : 12V or 24V DC permanent magnet, corrosion
resistant IP55 protected
Duty : *Continuously rated up to 3 metres (10 ft.),
total head of diesel fuel at 40°C (104°F).
01/03
VR050 Diesel Refuelling Pump
Typical Applications
VR050 12/24V Fuel Transfer Pump
Features
• Faster refuelling - 50 litres/minute (13 GPM)
• High head capability - 10 metres (32 feet.)
• Self priming up to 3 metres (9.6 feet.)
• Continuously rated*
• Vibration tested
• IP55 protected motor
• 24V version with thermal cut-out protection
• Full range of installation accessories
• Customised kits for OEM customers
Specifications
Model number Description
VR050-2022 ¾¨ BSP ports, 12v DC, switch & fuse
VR050-2120 ¾¨ BSP ports, 24v DC
VR050-2122 ¾¨ BSP ports, 24v DC, switch & fuse
VR050-1120 25mm (1¨), Hose ports, 24v DC
VR050-1022 25mm (1¨), Hose ports, 12v DC, switch & fuse
VR050-1122 25mm (1¨), Hose ports, 24v DC, switch & fuse
VR050-1123 25mm (1¨), Hose ports, 24v DC, automatic shut off controller
VR050-B013 25mm (1¨), Hose ports, 24v DC, switch & fuse, fitted with by-pass
Accessories For further information see Data Sheet 43010-0031
23738-0010B Check valve kit
23739-0000B Foot valve kit
23739-0100B Foot valve with shrouded strainer
23541-0001G Hose - 25mm (1¨) bore, [per metre]
23733-0000 Suction strainer 250 micron
50290-1000 Shrouded strainer
Model Range
Explosion hazard. Do not pump gasoline,
solvents, thinners or other flammable liquids.
To do so can cause an explosion resulting in
injury or death.
WARNING

Key Description Qty Part No.
1 Bolt M6 x 42 2 X3000-191F
2 Spring washer 3 X3081-091F
3 Rotor 1 50242-0000
4 Vane* 4 Use SK421-0000
5 Body
BSP 1 50244-2000
NPT 1 50244-9000
6 Bolt
M6 x 30 1 X3000-186F
7 Sealing Washer 2 SP1613-1415
8 Port adaptor 2 23543-1000
9 O-Ring* 1 X4020-264A
10 Backplate 1 50246-0000
11 Seal* 1 SP2701-0504
12 O-Ring* 1 X4020-211A
With Switch
12V 1 98012-9295B
13 Motor & Fuse
24V 1 98012-9296B
Basic
24V 1 98012-9297B
14 Switch box assembly 1 96070-6020B
15 Screw (Pack 10) 2 91046-6001B
16 Sealing washer (Pack 10) 2 91608-6001B
17 Fuse (Pack 10)
20 Amp (12V) 1 92005-6020B
10 Amp (24V)
1 92005-6010B
Service kit contains items marked * SK421-0000
Note
All performance information is based on diesel fuel at 20°C (68°F).
On production product, this may vary by up to 10%.
Maximum recommended total head of diesel fuel is 10 metres.
Current Draw 12V = 12 Amps @ 3m head
24V = 6 Amps @ 3m head
Maximum Current 12V = 20 Amps
24V = 10 Amps
Safety
Do not use for pumping petrol, gasoline or products with a flash point
below 37°C (99°F).
Do not dry run.
01/03
VR050 Diesel Refuelling Pump
USA UK GERMANY
Jabsco Jabsco Jabsco GmbH
20 Icon Bingley Road Oststrasse 28
Foothill Ranch Hoddesdon 22844 Norderstedt
CA 92610 Hertfordshire, EN11 0BU
Tel : [phone] Tel : [phone] Tel : [phone]
Fax : [phone] Fax : [phone] Fax : [phone]
Warranty: All products of the company are sold and all services of the company are offered subject to the company’s warranty and terms and conditions of sale, copies of which will be furnished upon request.
The information provided herein is for guidance only, it does not constitute a guarantee of the performance or specification of any individual product or component.
©Copyright 2003 ITT Industries - Jabsco 43010-0021
Parts List
0
3
6
9
12
15
30 35 40 45 50 55
Flow - Litres per Minute of Diesel
Total Head - Metres of Diesel
Maximum Recommended
14
12
108
40
30
20
10
0
Performance
Flow - US Gallons per Minute of Diesel
Total Head - Feet of Diesel
Dimensions in mm (inches)