Jack LaLanne's Power Juicer Pro User manual

E-1181
E-1189
Operating
Manual
Do Not Operate
The POWER JUICERTM
Before Reading This
Entire Manual.
FOR HOUSEHOLD USE ONLY
STAINLESS STEEL

TABLE OF CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . 3-4
Safety Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Cleaning Your Juicer . . . . . . . . . . . . . . . . . . . . . . . . .9
Equivalents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Common Questions & Answers. . . . . . . . . . . . . . . . . 12-13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacement Kit Order Form . . . . . . . . . . . . . . . . . . . .15
Congratulations on being a proud owner of the brand new Power Juicer Pro!
You can now look forward to enjoying delicious and nutritious fresh juices made
entirely from healthy fruits and vegetables, all while having lots of fun.
I’ve been juicing for 7 decades and after all this time, I believe that juicing can be the
foundation of youth that helps you nourish your river of life.
Now that you have a Power Juicer Pro, I’d like to invite you to be part of the Juice Club,
a wonderful worldwide community of juicers. Below is your Juice Club membership
card. Being a member will allow you to have special access to Power Juicer Pro
newsletters full of exciting incentives and information, including promotional offers;
healthy living articles and advice; tasty juicing recipes and tips; nutritional information
and much more.
Don’t wait – put your membership to work by visiting http://www.powerjuicer.com.
Enter passcode: pro2007.
Change your life, save your life and drink yourself healthy!
Thank you and Happy Juicing,
Jack LaLanne

3
IMPORTANT SAFEGUARDS
READ THESE SAFEGUARDS CAREFULLY
BEFORE USING THIS PRODUCT!
When using electrical appliances, basic safety precautions should always
be followed including the following:
• Read all instructions.
• NOT FOR USE BY CHILDREN! Keep out of the reach of children to avoid
injury. This appliance is not a toy.
• Do not operate this or any appliance with a damaged AC cord or plug.
• Do not operate if appliance malfunctions, has been dropped or appears
damaged in any manner. Never attempt home repairs. Only a qualied
appliance technician should repair appliance before re-use.
• To avoid electric shock or serious personal injury, do not use any
attachments or utensils that were not recommended or supplied by the
manufacturer.
• To protect against risk of electrical shock or injury, never immerse power
cord, plug, or main unit in water, or other liquids.
• Do not let Power Cord hang over the edge of table, counter, or come in
direct contact with hot surfaces such as stoves.
• Make sure the Lid is attached properly and is securely locked before
operating the Power Juicer. (See Assembly Step 5.)
• Make sure the motor stops completely and the unit is unplugged from the
electrical outlet before disassembling, assembling or cleaning.
• Should juicer suddenly stop or develop excessive vibration or unusually
loud noise, shut off and unplug unit immediately, wait for Blade to stop
running, then disassemble, clean thoroughly and reassemble.
• To avoid risk of personal injury keep hands and utensils out of the juicer
and away from its sharp Blade during operation. Use the Pusher, not
ngers or utensils, to feed the produce into the juicer.
• Never disengage the Locking Bar during operation.
• The juicer Blade is extremely sharp. Use extreme caution when handling.
• Should food become lodged in the Chute, and moderate Pusher pressure
will not dislodge it, turn the Power Switch off, allow the motor to stop
completely, then unplug the AC cord, disassemble the juicer and remove
the blocked food.
• Avoid personal injury. Never assemble the unit without using all
components in their proper sequence, making certain the Blade is properly
seated and secured in the Filter and Receptacle.

4
• The juicer will not run if the unit is not properly assembled. The motor has
a built-in safety feature that will not allow the power to turn on unless the
Locking Bar is locked in place.
• Do not use outdoors.
• Be sure to turn switch to OFF position after each use of your juicer. Make
sure the motor stops completely before disassembling.
• Do not use the appliance if the rotating Filter is damaged.
* This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will t in a
polarized outlet only one way. If the plug does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied
electrician. Do not modify or force the plug in any way.
• Do not operate without the pulp container in place.
SAFETY FEATURES
The Power Juicer was designed with safety in mind.
We have added two important safety features:
the Automatic Shut Off and the Locking Bar.
Built-In Thermal Cut Off Switch/Automatic Shut Off
Unlike other juicers, the Power Juicer is equipped with a special feature
that automatically shuts off the motor should the unit become jammed or
overheated during the juicing process. Prior to shut down, you will most
likely hear the juicer get louder. This will indicate that something has caused
the motor to strain. Should this happen, simply turn the Power Switch off
and unplug the unit… follow the Disassembly, Cleaning and Assembly
process, then allow the unit to cool for 10 minutes. The unit will restart
and you may resume the juicing process. There are some additional reasons
that could cause a “shut down”. You can nd them in the trouble shooting
section of your operating manual on page 15.
The Locking Bar
The Locking Bar holds the juicer Lid/Pulp Guard in place and is connected
to an auto shut-off switch. If the Locking Bar is not in its full upright and
locked position, the juicer will not start. This is to prevent accidental contact
with the spinning Blade. If the machine is not locked, the motor will not
engage and the Blade will not spin.
SAVE THESE INSTRUCTIONS

5
Pusher
Filter
Blade
Receptacle
Removable
Non-Drip Spout
Pulp
Collector
PARTS LIST
Crescent Tool
(for tightening and removing blade)
(Pegs fit into blade.)
Locking Bar
Screw Peg
Base
Lid with Pulp Guard
Chute
Pulp Guard
Lip
MAIN UNIT
(Fully Assembled)
Brush
(Crescent tool pegs fit
here to tighten.WARNING:
DO NOT OVER TIGHTEN)